RUT360 Firmware Downloads

---

This page contains firmware files for RUT360 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUT360 Firmware.

RUT360

---

File	Type	Release date	Size	MD5	Changelog
RUT36X_R_00.07.10.2_WEBUI.bin	Latest FW	2024.11.04	11.5 MB	fe957a14f41e023cbd998eb490556e59	Link
RUT36X_R_00.07.09.4_WEBUI.bin	Mass production FW	2024.10.02	11.5 MB	ff107a4edf1e738bc84f2a282bb363d0	Link

RUT36X_R_GPL_00.07.10.2.tar.gz

SDK

2024.11.04

20.17 MB

fbdabc075ab9985a032faa4b77f485ef

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

FW checksums

---

Checksums for firmware files can be found here.

Changelog

RUT36X_R_00.02.06 | 2020.12.31

• New features:
  • Operator Whitelist/Blacklist
  • WPA3 WiFi encryption

• Improvements:
  • Updated base to OpenWrt 19.07.4
  • Added Phone Groups as possible SMS recipients to SMS Post/Get
  • Added PSK support for MQTT Broker/Publisher
  • Changed Output Scheduler structure
  • Removed limitation of one configuration per Input
  • Added multiple modem support for TR-069
  • Fixed parsing user uploaded custom OpenVPN configuration files containing carriage returns
  • Added iptables conntrack flush on WAN Failover if IPsec is enabled
  • Optimized package responsible for sending/receiving GRE Tunnel keepalive packets
  • Improved Package Manager build system
  • Added extra error checking to Package Manager when downloading packages
  • Added data usage info for both SIM cards to RMS JSON
  • Added logging to syslog when Ping/Wget Reboot "Action" is set to 'None'
  • Improved display of configuration tables when a lot of information is shown
  • Renamed MODBUS strings to uppercase
  • Added redirect to configuration page after a new configuration is created with the 'Add' button
  • Added option to create a Configuration Profile from current configuration
  • Added data validation to Profiles Scheduler fields
  • Replaced the Firewall 'Helpers' page with conntrack helper configuration for each firewall zone
  • Increased dynamic list maximum amount of values to 50
  • Added the possibility to save email accounts without entering email username and password
  • Unified device access password validations
  • Expanded DDNS validation for domain input to accept emails
  • Added SMS Utilities rule to reset mobile data usage for specified interface
  • Improved SMS Utilities VPN status rule to support custom configurations
  • Added SMS storage limit check after inserting a SIM card
  • Added "Modem" type to modem related events
  • Changed modem name from primary to internal if device has only one built-in modem
  • Improved SIM count check during init
  • Added the possibility to ignore DFS channels when automatic channel selection is performed (for 5 GHz WiFi)
  • Removed unsecure WPA-PSK and WPA-EAP encryption support
  • Improved Hotspot Landing page address validation to accept a trailing slash
  • Removed unnecessary warning message in the Hotspot page
  • Disable Wireless device & interface configurations when WiFi device is in 'pending' state
  • Removed unused 'Expiration time' option in the Hotspot page

• Fixes:
  • Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet
  • Fixed occasions when error messages overlap buttons
  • Fixed I/O state saving after revert back to original state
  • Optimized script for downloading Package Manager packages after firmware upgrade
  • Fixed wireguard package
  • Fixed IPsec connection problems after reboot
  • Fixed bridged interface configuration for L2TPv3
  • Removed trailing newlines in returned SNMP strings
  • Fixed Events Reporting waiting to send email before rebooting
  • Fixed MQTT MODBUS Gateway not working when topics have special characters
  • Swapped pin3 and pin4 values in MQTT Publisher
  • Added an 'IP4Table' option to advanced interface configuration
  • Fixed an issue where User Scripts were being deleted after device reboot
  • Fixed various WebUI validation bugs, typos, option hints & alignments
  • Fixed a bug that caused an internal sever error after logging in with a username that contained special characters
  • Fixed crashes that occur after configuration files are not correctly generated
  • Fixed a Firewall Port Forwarding bug which caused an internal sever error when no 'Protocol' was selected
  • Fixed changing WebUI mode bug while current page is accessed with POST method
  • Fixed password allowed lengths and tooltips
  • Fixed mountpoint display
  • Removed non-supported SMS Utilities rules
  • Fixed SMS sending to Phone Group on I/O event
  • Changed device name in 'Status' message to configured name instead of the default one
  • Added modem reinit after SIM card initialization failure
  • Fixed SMS Limit checking when messages exceed the set SMS limit
  • Moved 2-8 PDP contexts to 9-16 the 2-8 are necessary for SIM card MIB APNs
  • Changed mobile interface subnet to /32
  • Fixed modem SIM card checking
  • Fixed multi SMS handling on SMS Limit
  • Mobile: fixed single sim sending as last SMS on limit (ID: 2102)
  • Fixed Call Utilities multiple SMS sending per received call
  • Fixed SMS storage limit check on device reboot
  • Changed SNMP mSignal, mTemperature and numSatellities datatypes to correspond to devices' MIB files
  • Fixed WiFi SSID validation
  • Fixed keeping Hotspot Walled Garden address list after firmware upgrade
  • Fixed internal server error upon opening the 'Wireless' Status page while WiFi device band is set to 'Auto'

RUT3_R_00.02.05.2 | 2020.11.19

• Fixes:
  • Randomized the global rate limiter to mitigate "SAD DNS" attack

RUT3_R_00.02.05.1 | 2020.09.30

• New features
  • Initial RUT360 Firmware