Template:Networking rut9xx firmware change log

RUT9XX_R_00.06.07.5 | 2021.01.81

• Fixes:
  • Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
  • Fixed SSH reachable over SIM IP in early boot
  • Added manual network band selection support for EC25-AF modem

RUT9XX_R_00.06.07.4 | 2020.12.21

• Fixes:
  • Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
  • Added openvpn patch to fix CVE-2020-11810
  • Added strongswan patch to fix CVE-2018-10811
  • Updated openssl to version 1.1.1i
  • Updated uci to version 2019-09-01
  • Updated license information to the System → Licenses → General info page

RUT9XX_R_00.06.07.3 | 2020.11.25

• Fixes:
  • Removed "remote-cert-tls server" option from default OpenVPN config

RUT9XX_R_00.06.07.2 | 2020.11.19

• Fixes:
  • Randomized the global rate limiter to mitigate "SAD DNS" attack

RUT9XX_R_00.06.07.1 | 2020.11.12

• Fixes:
  • Removed downgrade with 'Keep settings' permission with some firmwares
  • Fixed mdcollect to receive current data not period
  • Fixed single I/O trigger handling
  • Fixed multiple I/O triggers handling

RUT9XX_R_00.06.07 | 2020.09.30

• New features:
  • Port Mirroring
  • During this release a new package was released - [[{{{name}}}_Package_Downloads#WireGuard_Download|WireGuard]]

• Improvements:
  • dnsmasq updated to version 2.80
  • uhttpd updated to 2020-02-12 version
  • Added logging to Events Log on Modbus write actions
  • Added "Persistent connection" and "Timeout" options to Modbus TCP Slave
  • Added ASCII, HEX data types to Modbus TCP/Serial Master
  • Added more precise error messages to Modbus TCP Test
  • Added QoS option for Modbus Data Sender/MQTT protocol
  • Added new parameter called "all" to Modbus Data Sender to select all records into one packet
  • Increased Modbus Data Sender maximum name length
  • Added the option to send SMS to multiple numbers to Modbus Alarm Configuration
  • Added ICCID parameter to SNMP MIB module
  • Added 4 pin Input/Output parameters to SNMP MIB module
  • Added RSCP, EC/IO options to SNMP
  • Added support for multiple iroutes per OpenVPN client
  • Added validation to "Keep Alive" field in OpenVPN configuration
  • Added uploaded package signature verification to Package manager
  • Huawei MS2131 USB dongle back-end support
  • Added "Ignore incoming calls" option to Call Utilities
  • Added possibility to create new profiles from current configuration
  • Added additional AT commands for troubleshooting: AT+CGPADDR AT+QGMR AT+QCFG="NWSCANMODEEX" AT+QCFG="BAND" AT+QNWINFO AT+QENG="servingcell" AT+QENG="neighbourcell"
  • Added "RMS On/Off" input rule to Input/Output configuration
  • Added logging to Events Log when action is 'None'
  • Added MD5 & SHA256 checksum calculation for Configuration Backup files
  • Removed deprecated crt_rms service
  • Changed tooltip messages for Ping/Wget Reboot
  • Ping Reboot service rewritten from C to Shell
  • Improved IPsec and DMVPN pre-shared key validation
  • Fixed IPsec identifier validation
  • Added hints in "Multiple Access Points" page and a redirect to main wireless page after saving
  • Removed misleading hints from wireless MAC filter page
  • Unified I/O pin names throughout the interface
  • Improved validation for newly created port-based VLAN
  • Changed "Memory expansion" name to "Storage memory expansion"
  • Added loading icon when downloading Troubleshoot file
  • Added default text when no group is created in User Group selection
  • Unified VPN error messages
  • Removed "Back to overview" button from GRE Tunnel and SSTP pages
  • Added missing "Mode" option in "Mobile configuration" page when PPP is selected
  • Removed non-functional "Back To Overview" buttons
  • Removed the possibility to create custom reset button configurations
  • Added security fixes related to file upload and HTTP headers
  • Added existing SMS rule updating to new group name when changing group name
  • Unified and expanded username and password validations

• Fixes:
  • Fixed starting NTP client after WAN cable is plugged in
  • Fixed SIM Switch event sending after switch execution
  • Fixed SIM Switch PIN code setting after switch execution
  • Fixed sending logs via email
  • Fixed active SIM changing issues related to Modbus TCP Slave
  • Fixed first-trigger alarm frequency for Modbus Serial Master
  • Fixed period when Modbus Data Sender fails to send packet
  • Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
  • Fixed WiFi STA/AP bad test logic
  • Fixed WiFi STA operation while multiple WiFi APs are present
  • Fixed WiFi SSID string handling
  • Added WiFi SSID field validations
  • Fixed GPS time synchronization in some time zones below the equator for RUT955
  • Removed "Aggressive mode" choice from IPSec IKEv2
  • Reworked multiple subnet configuration parsing to match documentation recommendations
  • Fixed sent email logging on SMS to Email Forwarding
  • Included default profile together with other profiles in the list in SMS Utilities
  • Made DNS pushed from OpenVPN server live on OpenVPN client
  • Fixed compatibility with firmware after update to dnsmasq 2.81
  • Changed notification message that is shown when branched firmware is uploaded
  • Fixed Analog Input value display over RMS I/O monitoring
  • Fixed layout and validations in I/O Rules page
  • Unified Output option names in I/O pages
  • Fixed SIM2 default MTU value
  • Fixed change password error message after factory setting restore
  • Fixed non-existing page error on password change after factory setting restore
  • Fixed Lua error in Network → Mobile → SIM Management page
  • Fixed Lua error in MQTT Publisher page
  • Fixed profile apply/update/delete confirmation messages
  • Fixed error message display for SIM2 in mobile configuration page
  • Removed duplicate MTU field from Setup Wizard's Mobile page
  • Fixed incorrect MTU validation in LAN page
  • Fixed Hotspot statistics URL error, when URL contains special symbols (such as '%')
  • Fixed Hotspot statistics database clearing, when multiple users have the same MAC address
  • Fixed phone number field validations
  • Fixed Package Manager menu update right after new package upload
  • Fixed XSS vulnerability in System → Administration → Root CA page
  • Added band selection for 3G modem
  • Fixed "Success URL" validation in Hotspot configuration page
  • Fixed remote network netmask validation in OpenVPN page
  • Fixed element positioning in Setup Wizard, NTP and DHCP pages

RUT9XX_R_00.06.06.1 | 2020.03.12

• Fix:
  • Fixed ppp buffer overflow vulnerability (CVE-2020-8597)
  • Fixed saving Ping Reboot configuration

RUT9XX_R_00.06.06 | 2020.03.09

• New features:
  • UDP broadcast relay functionality
  • Redundancy protection, alarm frequency for Modbus TCP Master
  • Telenor MQTT package
  • MQTT publisher TLS support
  • VRRP multi-section configuration
  • Mobile Data Limit info in Clear Data Limit section
  • HTTPS control in Access Control window and corresponding SMS rule
  • Added source version value to Package Manager

• Improvements:
  • Complete rewrite of Modbus TCP Slave: fixed bugs, added new features
  • Modbus TCP Master test button now works without needing to save configuration first
  • Added ucitrack entry, improved init script for MQTT-Modbus gateway
  • Ability to install packages stored in backup file from Package Manager
  • Longer profile change loading animation that ends when profile is fully loaded
  • Profile name validation and name input hint
  • Updated Status → Services page design
  • Updated IPsec Pre-Shared key tooltip
  • Improved operator control with auto APN functionality
  • Refactored VRRP overview and status pages
  • Added 4 pin I/O SNMP trap rules

• Fixes:
  • Fixed GPSD session handling functionality
  • Rewritten communication logic for RMS connections with non-blocking socket
  • Fixed signal strength logs when Events Reporting is enabled
  • Fixed Events Reporting 'Send Test Email' button to not send empty emails
  • Fixed 'Change profile' SMS Rule
  • Fixed 'Monitoring status' SMS rule
  • Fixed 'Send status' message to other multiple phones
  • Unified password validation and password hints
  • Removed "Site Survey" page
  • Changed 'free' memory indication to 'used' memory in the Status → System window
  • Fixed mobile service 3G + 4G configuration
  • Fixed OpenVPN server status values in the Overview page
  • Fixed OpenVPN config from file
  • Fix mobile protocol value in the WAN window
  • Fixed restore to default LAN after disabling VLAN
  • Fixed RAM usage display
  • Removed 4 pin power block picture from devices which do not have it

RUT9XX_R_00.06.05.3 | 2019.11.26

• Fixes:
  • Fixed RMS not displaying correct data from device when mobile is enabled and there is more than one day of data collected

RUT9XX_R_00.06.05.1 | 2019.11.15

• New features:
  • Modbus TCP custom register block
  • tls-crypt Additional HMAC authentication option
  • Ability to upload custom OpenVPN configuration file
  • Ability to upload OpenVPN TLS-clients configuration
  • OpenVPN Password authentication
  • Azure IoThub MQTT subscriber support
  • Call utilities add support for answer/hangup with timer
  • SMS Utilities Auto-APN toggling rule
  • Full Unicode SMS support
  • Multiple Access Points
  • Network frequency band select support for global version

• Improvements:
  • Added tables' position priority in Overview settings
  • Added hint in the Hotspot statistics page
  • OpenVPN PKCS12 support added
  • Added supported AES ciphers to OpenVPN
  • Updated APN database
  • Add advertisement interval option to VRRP
  • Faster private key generation on first boot

• Fixes:
  • Restored Passthrough and Bridge mode DHCP leasetime configuration
  • Network frequency band selection fix
  • Network frequency Bands SIM1/SIM2 tab disappearing fix
  • Automatic APN save fix
  • Mobile Service mode validation fix
  • Mobile username/password' read & write fix
  • Mobile widget sent/received bytes for PPP mode fix
  • Mobile Data Limit firewall rule init fix
  • Operator control fixes
  • SMS Utilities message deletion fix
  • SMS Utilities vpnstatus command fix
  • SMS Utilities setting of APN with Auto APN enabled fix
  • OpenVPN enable/disable fix
  • OpenVPN Additional HMAC authentication option selection fix
  • OpenVPN TLS/Password & Password authentication fixes
  • VPN incorrect error message fix
  • Unified VPN name validation methods
  • Events Reporting service start fix
  • Events reporting event subtype changes
  • Network type logging on modem service restart fix
  • Added button to delete all access points, fixed long configuration apply times
  • Increased Hotspot Landing page file upload limits
  • SNMP option in Events Reporting without package installed fix
  • SNMP MIB syntax fixes
  • Samba CVE-2019-3824 and CVE-2019-3880 fixes
  • QoS speed fields validation fix
  • Latest HTTP/HTTPS connections not showing in Access Status fix
  • Added error messages in Package Manager
  • Package Manager: added service restart after keep settings and backup installation
  • Package Manager: decreased package script reload after keep settings firmware and backup upload
  • Package Manager: services start on boot if enabled fix
  • Changed packages names in Package Manager
  • Merged all Package Manager tabs into one
  • Premature session end when time is updated fix
  • Expanded Input/Output status view and updated information
  • Incorrect VLAN ID range fix
  • Fixed VRRP default config to follow RFC 2338
  • Hostname and router name after backup upload fix
  • Unified password field validations
  • USB modem widget crashing WebUI fix
  • CVE-2019-12272: possible shell injection in WebUI fixed
  • WebUI doesn't load if modem is unresponsive fix
  • Input/Output button styles changed to reflect global design
  • Fixed design issue in SIM idle protection
  • Restore Point applying after backup fix

RUT9XX_R_00.06.04.5 | 2019.08.26

• Fixes:
  • RutFOTA Memory managament fix and speed improvements
  • Firmware upgrade from server fix
  • Mobile page fix for 3G modules

RUT9XX_R_00.06.04.3 | 2019.08.14

• Fix:
  • Removed APB type 'mms' from database
  • Network Frequency Bands SIM1/SIM2 tab disappearing fix
  • Service mode validation fix
  • Automatic APN save fix
  • Mobile Username/Password read & write fix
  • LTE B20 band showing up twice fix
  • SIM2 tab APN write fix
  • SIM2 tab Authentication method does not show up fix
  • Enable automatic APN selection by default

RUT9XX_R_00.06.04.1 | 2019.07.31

• Fixes:
  • Mobile Bridge and Passthrough mode keep settings fix

RUT9XX_R_00.06.04 | 2019.07.24

• New features:
  • Package manager functionality added
  • Modbus Serial Master functionality added
  • SMS Limit functionality added
  • ZeroTier One VPN support implemented
  • Azure IoT Hub support implemented
  • Added buildable Cumulocity library and example application to the SDK
  • Add an insecure bridge option for MQTT
  • Added Jio APN

• Improvements
  • All VPN services styles were unified
  • Added Slovenia to operator country list

• Fixes:
  • SMS Gateway: Removed new line add after configuration save
  • Fixed Montenegro operators
  • SMS Utilities Mobile/WiFi on & off commands fixed
  • SMS Utilities UCI API rule fixes
  • Modbus Mobile/WiFi on & off commands fixed
  • DDNS service restart fix
  • Data limit validation fixes
  • Hotspot Logging disable fix
  • Some grammar mistake fixes
  • Disappearing 'Load Balancing/WAN Failover' option fix
  • Fixed spammy WiFi logging
  • On action 'reboot' allow a minimum of 5 minutes interval fix for Wget reboot
  • Load Balancing re-ordering and deletion fix, added validation for policy name
  • Operator control, determine APN from SIM IMSI number
  • WAN state and IP print fixes
  • DDNS name existence check fix
  • Ping Reboot packet size 0 fix
  • Added validation to prevent very large-files from being uploaded and taking up all the space in RAM
  • Hotspot external landing page de-selection fix
  • Input/Output Periodic Control fixes
  • Port forwarding with prefix /31 fix

RUT9XX_R_00.06.03.2 | 2019.06.10

• New features:
  • Added port logging
  • Added upload backup from lower firmware version support
  • Added 4-pin I/O support for new RUT9 models
  • Introduced auto APN selection feature
  • Added SNMP GET requests for LAN1/LAN2/LAN3/WAN (or LAN4) status
  • Hotspot TOS HTML support added
  • GPL Teltonika 'twStreamApp' API for ThingWorx added
  • Added UDP support for serial connections

• Improvements:
  • Updated uci to version 2018-08-11
  • Updated ubus to version 2018-10-06
  • Updated ubox to version 2019-04-07
  • Updated libubox to version 2019-02-27
  • Updated openssl to version 1.0.2r
  • Updated busybox to version 1.30.1
  • Updated dropbear to version 2019.78
  • Added reply after mobileon and mobileoff SMS Utilities commands
  • Added access control disable confirmation
  • Added data limit information in Hotspot landing page
  • Modbus: added busy status return code while actions are executed
  • GPS: added support for Input/Output
  • Expanded VRRP configuration to support virtual MAC
  • Added -U parameter to gsmctl for ussd commands

• Fixes:
  • Mobile page fix
  • Increased RMS HTTP Proxy resource limit
  • Fixed LED indication setting
  • Fixed input validation issues
  • Mobile traffic graph fixes
  • SIM Idle Protection test fix
  • Services: Remove GRE and Hotspot from Status → Services window
  • GPS speed calculation fix
  • Mobile: set 1st context to IPv4
  • RS232/RS485 service reload fixes
  • Bootloader URL update
  • Email to SMS validation and larger SMS send fix
  • Fixed LED signal issue when reporting invalid signal
  • Main WAN routes overwritten when USB Modem is used fix
  • Added explanation text to operator control
  • Remove WEP encryption method
  • Cloud4wi profile fixes
  • IPSec 'Allow WebUI access' with 'Redirect to HTTPS' fix
  • SMS Utilities User group validation fix
  • GPS Map was made compatible with Edge browser
  • GPS Tab order fix
  • Wireless regulatory domain and channel change fix
  • GRE and GPS start/stop fix
  • Minor NHRP bug fixes
  • XHR authentication fixes
  • DMVPN lua bug fix
  • SMS Forwarding clarified WebUI options
  • Hotspot local users data limit fix
  • Setup Wizard Mobile 'Dialing number' disappears after save fix
  • Setup Wizard: Validation fix
  • Wireless SSID validation fix
  • Bidirect mode connection problems fix
  • GPS & SNMP Trap link fixes
  • Validation for GRE Tunnel interface name added
  • Force band validation fix
  • VRRP status window fix
  • PPTP server configuration when upgrading from old firmwares with keep-settings enabled fix
  • Added GPS geofencing coordinate validation
  • Added error return codes for fault conditions, changed writing register numbers for Modbus
  • Fixed GPS time synchronization
  • Output - Periodic Control form not visible on Chromium fix
  • SIM Switch on mobile data limit fix
  • Load Balancing validation for port numbers fixed, modified warning message
  • Overview Bytes sent/received count fix
  • Fixed sending data to AVL server
  • OpenVPN configuration name fix
  • DMVPN configuration count validation fix
  • IPSec LAN access fix
  • After editing WAN interface, redirect back to WAN page fix
  • Wireless STA scanning when all AP are down fix
  • SMS Gateway auto reply page fixes
  • NTP time zone options fix
  • Wake on LAN validation to prevent shell command execution via 'name' field
  • GPS Input/Output SMS send fix
  • RMS HTTPS proxy fix
  • Fixed RMS WAN State and WAN IP
  • MQTT bridge with SSL/TLS connection fix
  • Use DNS servers advertised by peer not saving fix
  • Wget reboot logging fixes
  • Periodic Control do not show timeout if it is disabled fix
  • QoS speed limitation fix
  • Added additional band support for some models

RUT9XX_R_00.06.02.2 | 2019.04.23

• Fixes:
  • GPS related fixes
  • SDK compilation fixes

RUT9XX_R_00.06.02 | 2019.04.05

• New features:
  • Added Modbus master feature
  • Added Modbus data sender feature
  • Added NMEA forwarding, Geofencing, NTP calculation, AVL forwarding, HTTPS forwarding, other satellite support to GPS functionality
  • Added DMVPN service
  • Impelemented NHRP protocol

• Improvements:
  • Updated xl2tpd to version 1.3.13
  • Added "use as default gateway" option to SSTP
  • Added XT25F128B flash support
  • Shared-keys option added to Strongswan
  • Auto option selection added to Strongswan
  • Added GRE Tunnel source selection from interfaces and ability to write in the local IP
  • Added ability to create VLAN 0

• Fixes:
  • Fixed Event Log reporting over FTP
  • Multiple OpenVPN fixes
  • IPSec start order fix
  • IPSec configuration loss fix
  • IPSec sha512 and sha384 support fix
  • IPSec IKEv2 restart loop fix
  • L2TP stability issue fixes
  • L2TP service restart after config change fix
  • USB to serial multiple minor bug fix
  • Samba multiple bug fix
  • Wireless Station availability when two or more Access Points are created fix
  • Input/Output analog calculator fix
  • Wget Reboot disable fix
  • SMS Utilities, 'more' command SMS text customisation fix
  • SMS Utilities GPS ON/OFF fix
  • SMS Utilities 'uci show' command fix
  • Multiple SMS Utilities remote configuration fixes
  • Use WAN as LAN fix
  • Wake on LAN use WAN as LAN fix
  • Authorization on LTE network fix
  • Restore Point file download fix
  • LED issue when rebooting router with reset button fix
  • LED issue when there is no connection fix
  • SSTP interface up after being disabled fix
  • MQTT Publisher WAN IP retrieval fix
  • Static leases, MAC address list fix
  • Static Routes, PPTP interface creation fix
  • SMS Utilities User groups synonymous numbers '00XXX' & '+XXX' fix
  • Hotspot Restricted Internet Access fix
  • Hotspot session in use by user deletion fix+
  • Hotspot Walled Garden fix
  • Hotspot Statistics window contains non-hostpots fix
  • Hotspot authentication mode validation fix
  • VLAN, LAN Network configuration backup fix
  • VRRP fix
  • Call utilities, mobile data ON/OFF without config write fix
  • MQTT multiple bug fixes
  • Output Scheduler fix
  • Profiles: output scheduler update fix
  • Maximum length SMS message send fix
  • DDNS sleep after check interval and force interval fix

RUT9XX_R_00.06.00.4 | 2019.03.12

• Fixes:
  • Samba fix

RUT9XX_R_00.06.00.3 | 2019.03.08

• Fixes:
  • Special case 3G to 4G fix

RUT9XX_R_00.06.00.2 | 2019.03.07

• New features:
  • Added Wake on LAN feature
  • Added SMS Utilities Wake on LAN rule
  • Added Global module connection support

• Improvements:
  • Changed RMS communication protocol to MQTT from OpenVPN
  • Added informational text to Proxy based content blocker page
  • Improved wording in Load Restore Point section
  • Updated curl to version 7.64.0
  • Updated OpenSSL to version 1.0.2q

• Fixes:
  • UPNP not starting, reappearing leases fixes
  • Removed NOTRACK from firewall rules
  • RS232/RS485: allow DNS NTRIP address
  • DDNS Process kill fix
  • Multiwan fix
  • Added rule validation to Load Balancing
  • rpcd broken pipe fix
  • Daily mobile traffic deletion fix
  • Fixed mobile traffic logging graph issues
  • CLI Connect button fix
  • Data only SIM support fix
  • Limit guard Widget fix
  • Sodog related fixes
  • Hotspot Advertisement address error message fix
  • SSTP fix
  • SIM switch related fixes

RUT9XX_R_00.05.04 | 2019.01.14

• Improvements:
  • Added IP allocation for users in L2TP server
  • SMS utilities add 'more' functionality
  • Added modem band display in Mobile page

• Fixes:
  • Remote access information fix
  • Fixed static route application for PPTP, L2TP servers
  • Fixed PPTP passwords file override
  • L2TP IP-range change fix
  • Fixed firewall rules that apply for hotspot firewall zone
  • SMS Utilities web access control rule fix
  • Wireless status and mobile uptime fixes
  • Fixed active connections on Fallback WAN
  • Fixed routing table display
  • Setup Wizard LAN DHCP fields not hidden when DHCP is unchecked fix
  • Fixed GRE Tunnel connection
  • Fixed static routes table view with VPN interfaces
  • Enabled NTP to run server and client simultaneously

RUT9XX_R_00.05.03.4 | 2018.12.20

• Fixes:
  • SSH security fix
  • Mobile page fix

RUT9XX_R_00.05.03.3 | 2018.12.11

• New features:
  • Added SSTP VPN protocol
  • Added force network bands support for RUT9xx H*****, U***** and T***** product codes
  • Added STunnel feature to VPN services

• Improvements:
  • Added every WAN interface selection to QoS
  • Updated VRRP to latest version
  • Added MAC address range support for WiFi MAC filter

• Fixes:
  • Enabled "Enter" key on login form
  • Mobile WAN IP display in overview
  • SMS status WAN IP with multiwan fix
  • Fixed WAN failover metrics and priorities
  • Some additional WAN failover fixes
  • Update Teltonika contact address in Licenses page
  • Fixed lua dispatcher error after reboot
  • Overview OpenVPN widget fix
  • Associated wireless stations display fix
  • PPTP default gateway set and delete fix
  • GRE Tunnel delete after button press fix
  • L2TP network restart after L2TP connection loss fix
  • Wireless connection loop fix
  • Modem related updates
  • Disabled DHCP request in bridge mode
  • Keep data limit count after firmware upgrade with keep settings fix
  • WiFi STA+AP fix
  • GPS related fix
  • SNMP signal value type and memory leak fixes
  • Modbus serial read gateway timeout fix
  • Modbus set APN and memory leak fix
  • Serial over IP ASCII full character support fix
  • SMS Utilities check for incoming SMS fix
  • Events Reporting firmware upgrade fix
  • Mobile WAN IP fix
  • L2TP network restart after client delete with default gateway set fix
  • Hotspot user validation fix
  • Added OpenVPN service restart when TLS Password is changed
  • Redirect to different LAN IP after configuration backup, restore and firmware upgrade fix
  • NTP time synchronisation after WebUI configuration fix
  • Setup wizard wireless channel select fix
  • Data collection counter fixes
  • Fixed inactive SNMP Input/Output traps
  • SNMP Hotspot and serial values fix
  • Log to flash limited to 1MB

RUT9XX_R_00.05.02.6 | 2018.11.05

• Fixes:
  • Overview mobile WAN IP display fix

RUT9XX_R_00.05.02.5 | 2018.10.26

• Fixes:
  • Removed ability to use username and password without APN
  • Updated to latest modem version
  • Changed dhcp usage on mobile interface

RUT9XX_R_00.05.02.3 | 2018.10.22

• New features:
  • Added event log entry when clearing mobile data limit

• Fixes:
  • Data limit calculation fixes
  • SIM switch: data limit check fixes

RUT9XX_R_00.05.02.2 | 2018.10.12

• Fixes:
  • Troubleshoot: sensitive information (usernames and passwords) removal from router configuration
  • DDNS IP source changing fix
  • Overview VRRP widget status fix
  • OpenVPN name validation with special symbols check fix
  • SMS Forwarding number check with 00 code with listed numbers fix
  • Overview SMS counter widget fixes
  • Firewall and UPnP page display fixes
  • Periodic SIM Switch check fix
  • Operator selection fix
  • SNMP MIB values and file format fix
  • OpenVPN configuration section name compatibility fix
  • Call Utilities: 4G-only mode warning fix
  • Mobile traffic data usage delete fix
  • Disabled passthrough and bridge selection when multiwan is enabled
  • Log to flash limited to 1MB

RUT9XX_R_00.05.02 | 2018.10.01

• New features:
  • Added Relayd function
  • Added ability to create multiple geofencing zones
  • Added support for NTFS disks
  • Enabled diffie-hellman-group14-sha1 key exchange algorithm

• Improvements
  • Changed default VLAN to vid 0, added ability to tag WAN port
  • Added ebgp-multihop option to BGP
  • Added Modbus parameters for GPS information
  • Added custom IPsec option field
  • Disabled Hotspot users ability to reach LAN devices and WebUI
  • WAN Failover: add option to execute command
  • Made Wired (Main) + Mobile (Failover) as default configuration
  • Enabled connection to RMS by default
  • Some RMS page updates
  • Added default LAN IPv6 address

• Fix:
  • OpenVPN server authentication change fix
  • Events reporting rule enable fix
  • PPTP use as default gateway option fix
  • Language translation fixes
  • RS232/RS485 synchronization bug fix when using NTRIP with GPS coordinates
  • Operator list fixes
  • USB to Serial firewall rules fix
  • SMS Utilities rule not enabled exit fix
  • MQTT remote address datatype fix
  • GSMD: remove old info from help
  • Some Hotspot functionality fixes
  • Input/Output User groups fix
  • DHCP server lease time fix
  • Dynamic routes fixes
  • Static Routes fix
  • Mobile Passthrough mode fix
  • Events Log Report configuration validation fixes
  • WiFi updates and security fixes
  • Overview WAN wiki link fix
  • Overview Hotspot widget fix
  • SIM Idle Protection Test WAN IP fix
  • Samba network share discovery fix
  • SIM card switch on data limit fix
  • Mobile data bytes reset on 4GB fix
  • Hotspot start after reboot fix

RUT9XX_R_00.05.01.8 | 2018.09.10

• Fixes:
  • Config restore fix
  • RS-232 serial over IP fix
  • CLI fix for RMS

RUT9XX_R_00.05.01.5 | 2018.08.02

• New features:
  • Added PDU forwarding function
  • Added new logic for operator whitelist/blacklist
  • Updated mobile operator database
  • Added Firmware update information
  • Added information text in Emailt to SMS page
  • Added wiki link to an IP type next to WAN IP
  • Added Graphs/Signal strength: UMTS network type signal
  • Added Operators list: periodic network scan if fail to connect to operator on first time
  • Added SLIP protocol with slattach software into the router
  • Added automatic IP refresh in WAN page
  • Added VLAN LAN IP start and end automatic update

• Fixes:
  • DDNS Force update
  • Configuration Wizard: LAN page redirect fix
  • Overview: WAN IP fix
  • Fixed Troubleshoot: TCP dump
  • Access Control: Add Redirect to HTTPS information
  • Service Status: QoS status
  • Hotspot: Parameter validation
  • Overview: OpenVPN widget
  • PPTP: Fix interface metric on multiwan with PPTP
  • Nerwork -> WAN Mode translate
  • DHCP range display in VLAN page
  • Change 'Backup WAN' to 'WAN Failover'
  • Linux: CVE-2017-18017
  • OpenVPN: remote IP address validation to not include route LAN subnet
  • GRE: updated keep alive to work with cisco routers
  • WebUI: NTP Time servers page fix
  • Call Utilities: reboot action partial message
  • WebUI: sim_switch: add ICMP host field validation
  • Hotspot: data limit fix
  • Security: CLI: updated shellinabox to 2.20, changed CLI WebUI page
  • WebUI: DDNS: Force IP renew
  • WebUI: SMS counter widget
  • WebUI: Hotspot: security
  • PPP: add default route
  • WebUI: Hotspot: Protocol and HTTPS redirect option
  • WebUI: Mobile Traffic Usage Logging
  • WebUI: Administration added hostname length limit (32 symbols)
  • OpenVPN: Add RMS service fix
  • libgsm: Prevent crash on failed libusb init
  • uHTTPd: Disable stderr option
  • SMS Utilities: Prevent crash when reading config
  • Mobile: Service mode selection fix
  • WebUI: Prevent redirection to HTTPS by default
  • WebUI: Add hint when accessing CLI without certificate
  • SMS Utilities: Prevent stopping application on empty reports config
  • CLI: Use correct service port

RUT9XX_R_00.05.00.5 | 2018.05.30

• New features:
  • Added forced password change
  • New firmware versioning system

• Fixes:
  • Fixed SMS PDU decoding sender number
  • Fixed RMS connection status display in Overview window
  • SIM Switching fix
  • Updated Hotspot login page parameters (MAC parameter)

RUT9XX_R_00.04.233 | 2018.04.26

• Fixes:
  • Minor Hotspot fixes (CVE-2018-17532)
  • Minor SIM Switch fixes
  • Minor opkg fix and package update

RUT9XX_R_00.04.199 | 2018.04.18

• Improvements:
  • Upgraded SIM Switch speed
  • Upgraded OpenVPN with the possibility to upload CRL files
  • Added IP aliases description and advanced features
  • Added additional DPD option to IPsec configuration

• Fixes:
  • Disabled saving password with the Enter key on WebUI
  • Firewall User Script fix
  • OpenVPN TLS clients fix
  • Some IPsec functionality fixes
  • Fixed all VPN shutdown on delete
  • Mobile Passthrough mode bad netmask fix
  • Call Utilities write to config fix
  • Minor Input/Output fixes
  • Fixed RMS connection retry time
  • Signal Strength display fix for HSDPA+HSUPA network type

RUT9XX_R_00.04.172 | 2018.04.10

• New features:
  • Added RMS connection page to Setup Wizard
  • Added link to Teltonika wiki in the router's WebUI
  • Updated Overview conifugration with Remote Monitoring widget and wiki icon

• Improvements:
  • Upgraded to faster SIM switching logic

• Fixes:
  • Fixed OpenVPN TLS/Password client route pushing
  • Fixed GPS bug that caused 100 % CPU usage when using I/O
  • Fixed password saving with the "Enter" key
  • Removed RS485 echo
  • Fixed Event Log bug that caused Call events not showing up in the log
  • Fixed SMS-Utilities openvpn status rule

RUT9XX_R_00.04.161 | 2018.03.26

• Improvements:
  • Improved SSH security

• Fixes:
  • Fixed deleting SMS messages function in SMS Utilities
  • QoS bug fix that caused it to work even if it was disabled
  • LTE only mobile data connection fix
  • Minor Kernel fix
  • Minor functionality fixes for when there is no SIM card inserted

RUT9XX_R_00.04.153 | 2018.03.16

• Fixes:
  • IPsec fix for use with multiple WANs
  • Fixed a bug that caused different WAN IPs to be displayed in the Overview and WAN windows
  • SMS Forwarding to HTTP fix
  • SMS Utilities functionality fixes

RUT9XX_R_00.04.147 | 2018.03.08

• New features:
  • Added L2TP tunnel watchdog.

• Fixes:
  • PPP connection type fix
  • SMS Utilites vpnon/vpnoff rule fixes
  • Added GRE-Tunnel fix that prevents problems when switching profiles
  • OpenVPN status display fix
  • SMS Forwarding to Email fix

RUT9XX_R_00.04.125 | 2018.02.27

• Improvements:
  • Added ICCID print, for dynamic parameters
  • Added reload function for GRE Tunnel if SIM Switch ocured
  • Added SIM card option for GRE tunnel

• Fixes:
  • SMS Utilities forward to HTTP fix
  • Network Shares USB drive safe removal fix
  • Some changes to config hierarchy
  • Wget Reboot fix
  • Input/Output SIM Switch rule fix

RUT9XX_R_00.04.112 | 2018.02.20

• Fixes:
  • Small fix for HTTPS access when DMZ is enabled
  • Updates to Firmware Upgrade verification
  • L2TP unused UCI option removed
  • Minor fixes to VPN use with Multiwan
  • Format style fixes for VPN pages

RUT9XX_R_00.04.103 | 2018.02.14

• Fixes:
  • SMS Counter database fix
  • IP renewal by APN fix
  • Firmware verification bug fix
  • Call Utilities rule enable fix
  • Wget Reboot modem restart fix

RUT9XX_R_00.04.94 | 2018.02.12

• New features:
  • Added Printer Server functionality that allows control of a printer that connects to the router via USB cable

• Improvements:
  • Improved RS232/RS485 Over IP function so that the server can communicate with multiple clients at the same time
  • Added automatic Firewall rules that allow remote access to the router's WebUI when DMZ is enabled

• Fixes:
  • Some minor Samba fixes in the WebUI
  • OpenVPN username and password validation fix
  • Fixed VPN service restart when in use with Multiwan
  • Site Blocking file parsing fix
  • Some updates to the router's config file system
  • Firmware check fix

RUT9XX_R_00.04.75 | 2018.01.30

• Fixes:
  • APN bug fix
  • Added modem Firmware update package
  • Some minor OpenVPN username and password requirement fixes

RUT9XX_R_00.04.64 | 2018.01.23

• Improvements:
  • SMS Utilities rule configuration pages supplemented with information about SMS text format
  • Disable NAT function moved from VPN to Firewall page

• Fixes:
  • Minor fix to Hotspot functionality
  • Minor fixes to Firewall confg
  • Fixed Mobile Data Limit byte count storage
  • RS232/RS485 Modbus functionality fixes

RUT9XX_R_00.04.57 | 2018.01.17

• Improvements:
  • Added special character support for OpenVPN tunnel names
  • Added binero.se to DDNS service list

• Fixes:
  • Fixed Write to config function for SMS Utilities mobileoff rule

RUT9XX_R_00.04.48 | 2018.01.12

• New features:
  • Added RS232 over IP serial data as email feature

• Fixes:
  • Fixed MQTT bug where you couldn't remove TLS/SSL option once selected
  • Fixed GPS hostname data type check
  • Fixed DHCP lease time validation in LAN and Setup Wizard
  • Updated IPsec stop function
  • Site blocking White List fix
  • Modem GPS related bug fix

RUT9XX_R_00.04.38 | 2018.01.08

• Fixes:
  • Changed Mobile Data Limit representation in the Overview window
  • Fixed GPS Fix status display bug

RUT9XX_R_00.04.32 | 2018.01.04

• New features:
  • Added Wget Reboot function
  • Added RS232/485 initiation string option for Modem mode

• Fixes:
  • Samba user creation fix. Added a user limit of 2999 users
  • Some minor grammatical and data type fixes in the router's WebUI
  • Added a function that restarts services when using the SMS Utilities uci rule
  • Input/Output Scheduler backup fix
  • Some fixes to the style of the Administration page
  • Network Operators White List fix
  • Mobile connection stability fix

RUT9XX_R_00.04.12 | 2017.12.22

• New features:
  • Added IPsec support for multiple clients

• Improvements:
  • Updated troubleshoot package with IPsec status
  • Added WebUI notice for SIM Switch on Data limit
  • IPsec instances limit set to 5
  • Dynamic list limit set to 100

• Fixes:
  • Wi-Fi security fix
  • Firmware update fix due to 04 FW version
  • SIM Switch back to primary SIM after Data or SMS limit fix
  • Fixed bug that didn't allow hostnames to be used as Ping Reboot

RUT9XX_R_00.03.985 | 2017.12.14

• New features:
  • Added left and right firewall options to IPsec configuration

• Fixes:
  • Fixed some minor grammatical errors
  • SIM PIN bug fix
  • Some minor fixes to SMS and Call Utilities
  • Fixed loading gif spinner bug that caused it to spin endlessly
  • SMS Gateway form validation fixes
  • Post/Get configuration fix
  • Fixed empty value insertion for IPsec local LAN
  • Fixed iptables rule that didn't allow Limit Guard to account traffic
  • Some minor PPTP Server and Client fixes
  • Fixed mobile disconnection bug

RUT9XX_R_00.03.965 | 2017.12.07

• New Features:
  • Added NAT Helper control page to the Firewall section

• Improvements:
  • Added IPsec Multiwan support for transport mode

• Fixes:
  • Changed data type for storing Data limit network stats
  • Added some default Firewall rules needed for SIM Switch
  • SIM Switch on Data limit now uses limit_guard for counting data
  • Some stylistic changes to router's WebUI
  • Fixed Call Utilities calling from User Group bug
  • Fixed OpenVPN Static key bug

RUT9XX_R_00.03.946 | 2017.12.01

• New features:
  • Added OpenVPN Client key decryption password field

• Improvements:
  • Updated Dynamic DNS service

• Fixes:
  • OpenVPN Server configuration save fix
  • Multiple PPTP clients in LAN fix
  • Fixed Realtime Traffic graphs with PPP type connection
  • Fixed PPP connection type data usage collecting

RUT9XX_R_00.03.923 | 2017.11.24

• Fixes:
  • Wi-Fi Station with WPA-Enterprise fix
  • Fixed Wi-Fi Access Point SSID mismatch when adding new Access Points
  • Fixed no data connection bug when Operator is added to the White List
  • Added fix that makes sure password fields glow red after entering incorrect data
  • Fixed SMS Utilities bug that caused Router Name not being displayed in status messages
  • SMS Counter fix
  • Some security fixes
  • Some modem functionality fixes that prevent not switching to LTE
  • SIM Switch logic fixes

RUT9XX_R_00.03.906 | 2017.11.20

• New features:
  • Added WPA-Enterprise support
  • Added Hotspot Landing page URL parameters config
  • Added Host list file feature that allows uploading a list of hosts to Site Blocking and Proxy Based Content Blocker
  • Added RS232/RS485 Serial type: Modem option
  • Added SNMPv3 support
  • Added Huawei USB modem support added

• Fixes:
  • Added reboot patch for Event Log messages
  • Use IPv4 Only fix that caused not using default context ID
  • Fixed reboot with button issue
  • Added Multiwan checking for L2TP fix
  • Added default static route selection for L2TP
  • Some kernel logging fixes
  • Updated iptables 1.4.21 release to 2
  • Updated busybox package to 1.24.2
  • Fixed OpenVPN NAT configuration
  • Web Filter model fix
  • SMS Counter fix
  • Fixed Bridge mode bug that prevented devices from getting an IP address when APN was entered
  • Fixed connection to hidden Wi-Fi Access Point

RUT9XX_R_00.03.850 | 2017.11.03

• New features:
  • Added NETMAP functionality

• Fixes:
  • Some Limit Guard fixes
  • Some GPS functionality fixes
  • Mobile sent/received data added to TR-069
  • Fixed start up of SD card

RUT9XX_R_00.03.832 | 2017.10.25

• Improvements:
  • Added network and cell information

• Fixes:
  • RS232/RS485 fix for flow controll settings and console mode
  • Internet Explorer WebUI bug fix
  • Fixed new FOTA version notice
  • Added network and cell information