Network share using SAMBA
From Teltonika Networks Wiki
Revision as of 18:04, 21 April 2022 by Shivang.amin (talk | contribs)
Contents
Introduction
This article provides information and step by step guide to configure samba share on Teltonika routers and windows pc.
The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.
Prerequisites
You will need:
- RUTX router running FW version RUTX_R_00.07.01.4 or newer.
- A computer running Windows OS.
- A USB flash drive.
Instructions
- Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wirelessly.
- Login to the router's webUI, go the Services → USB Tools → General page and verify if your USB is mounted.