Domnev1

From Teltonika Networks Wiki
Revision as of 09:25, 30 November 2022 by Domnev (talk | contribs)

Introduction

This article contains instructions on how to configure SMS and Script alerts using I/O Juggler and SMS Utilities between two RUT955 routers.

Tunnelbroker configuration

Create Tunnelbroker account. https://tunnelbroker.net/

IPv6 to IPv4 setup

Setup IPv6 over IPv4, also known as 6in4 IPv6 transition mechanism

Relayd installation

Install relayd package if needed, skip this step on RUTX series devices or if you already installed it on your router 

opkg update 
opkg install relayd

WiFi client configuration

Add WiFi interface to make your router act as a WiFi client (connect to another AP) 

uci add wireless wifi-iface
uci set wireless.@wifi-iface[-1]=wifi-iface

Add new WiFi interface to 2.4ghz device, can specify 'radio1' for 5ghz 

uci set wireless.@wifi-iface[-1].device='radio0'
uci set wireless.@wifi-iface[-1].mode='sta'
uci set wireless.@wifi-iface[-1].network='wifi_wan'

Change SSID here to an SSID that the router will be connecting to 

uci set wireless.@wifi-iface[-1].ssid='RUT_4474_2G'

Change BSSID here to BSSID that the router will be connecting to (L2 address) 

uci set wireless.@wifi-iface[-1].bssid='00:1E:42:44:44:74'

Use appropriate auth method, PSK2 = WPA2-PSK here 

uci set wireless.@wifi-iface[-1].encryption='psk2'

Change secret to appropriate one 

uci set wireless.@wifi-iface[-1].key='Vc80Tps1'
uci set wireless.@wifi-iface[-1].disabled='0'
uci set wireless.@wifi-iface[-1].skip_inactivity_poll='0'
uci set wireless.@wifi-iface[-1].wifi_id='wifi1'

New internface configuration 

uci set network.wifi_wan=interface
uci set network.wifi_wan.proto='dhcp'
uci set network.wifi_wan.metric='6'
uci set network.wifi_wan.disabled='0'
uci set network.wifi_wan.force_link='0'
uci set network.wifi_wan.broadcast='0'

IPv6 interface creation 

uci set network.wifi_wan6=interface
uci set network.wifi_wan6.proto='dhcpv6'
uci set network.wifi_wan6.metric='6'
uci set network.wifi_wan6.disabled='0'
uci set network.wifi_wan6.force_link='0'
uci set network.wifi_wan6.reqaddress='try'
uci set network.wifi_wan6.reqprefix='auto'
uci set network.wifi_wan6.device='@wifi_wan'
uci set network.lan_repeater=interface
uci set network.lan_repeater.proto='relay'
uci set network.lan_repeater.lan_mark='lan'
uci set network.lan_repeater.enabled='1'
uci set network.lan_repeater.network='lan wifi_wan'
uci set network.lan.ipaddr='192.168.1.3'

Set DHCP settings for LAN interface (disable dhcp on LAN) and enable IPv6 relay on wifi_wan interface and 

uci set dhcp.lan.ignore='1'
uci set dhcp.lan.ra='relay'
uci set dhcp.lan.dhcpv6='relay'
uci set dhcp.lan.ndp='relay'
uci set dhcp.wifi_wan=dhcp
uci set dhcp.wifi_wan.ra='relay'
uci set dhcp.wifi_wan.dhcpv6='relay'
uci set dhcp.wifi_wan.master='1'
uci set dhcp.wifi_wan.ndp='relay'

Set firewall zone, using WAN firewall zone for newly created wifi_wan network interface 

uci set firewall.@zone[1].network='wan wan6 mob1s1a1 mob1s2a1 wifi_wan'

Set mwan3 settings for new interface wifi_wan 

uci set mwan3.wifi_wan=interface
uci set mwan3.wifi_wan.enabled='0'
uci set mwan3.wifi_wan.interval='3'
uci set mwan3.wifi_wan.family='ipv4'
uci add mwan3 condition
uci set mwan3.@condition[-1].interface='wifi_wan'
uci set mwan3.@condition[-1].track_method='ping'
uci add_list mwan3.@condition[-1].track_ip='1.1.1.1'
uci add_list mwan3.@condition[-1].track_ip='8.8.8.8'
uci set mwan3.@condition[-1].reliability='1'
uci set mwan3.@condition[-1].count='1'
uci set mwan3.@condition[-1].timeout='2'
uci set mwan3.@condition[-1].down='3'
uci set mwan3.@condition[-1].up='3'
uci set mwan3.wifi_wan_member_mwan=member
uci set mwan3.wifi_wan_member_mwan.interface='wifi_wan'
uci set mwan3.wifi_wan_member_mwan.metric='1'
uci set mwan3.wifi_wan_member_balance=member
uci set mwan3.wifi_wan_member_balance.interface='wifi_wan'
uci set mwan3.wifi_wan_member_balance.weight='1'
uci add_list mwan3.mwan_default.use_member='wifi_wan_member_mwan'
uci add_list mwan3.balance_default.use_member='wifi_wan_member_balance'

Set proper ipv6 settings for wifi_wan6 iface 

uci set mwan3.wifi_wan6=interface
uci set mwan3.wifi_wan6.enabled='0'
uci set mwan3.wifi_wan6.interval='3'
uci set mwan3.wifi_wan6.family='ipv6'
uci add mwan3 condition
uci set mwan3.@condition[-1].interface='wifi_wan6'
uci set mwan3.@condition[-1].track_method='ping'
uci add_list mwan3.@condition[-1].track_ip='2606:4700:4700::1111'
uci add_list mwan3.@condition[-1].track_ip='2001:4860:4860::8888'
uci set mwan3.@condition[-1].reliability='1'
uci set mwan3.@condition[-1].count='1'
uci set mwan3.@condition[-1].timeout='2'
uci set mwan3.@condition[-1].down='3'
uci set mwan3.@condition[-1].up='3'
uci set mwan3.wifi_wan6_member_mwan=member
uci set mwan3.wifi_wan6_member_mwan.interface='wifi_wan6'
uci set mwan3.wifi_wan6_member_mwan.metric='1'
uci set mwan3.wifi_wan6_member_balance=member
uci set mwan3.wifi_wan6_member_balance.interface='wifi_wan6'
uci set mwan3.wifi_wan6_member_balance.weight='1'
uci add_list mwan3.mwan_default.use_member='wifi_wan6_member_mwan'
uci add_list mwan3.balance_default.use_member='wifi_wan6_member_balance'
uci set mwan3.default_rule_ipv6=rule
uci set mwan3.default_rule_ipv6.dest_ip='::/0'
uci set mwan3.default_rule_ipv6.use_policy='mwan_default'
uci set mwan3.default_rule_ipv6.family='ipv6'

Save all the changes and restart the configuration 

uci commit
reload_config
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Domnev1&oldid=99646"