Template:Networking rutos manual network

Summary

The Network page contains information related to the device's networking. This chapter is an overview of the Network page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

LAN

This tab displays information about the device's local network(s). The figure below is an example of the Network window:

lan information
Name	LAN interface name
IP address	IP address of the LAN interface
Netmask	Netmask of the LAN interface. In a sense, a netmask specifies the size of a network. In other words, it indicates which part of the IP address denotes the network, and which denotes the device
dhcp leases
Hostname	Hostname of a LAN client
IP Address	IP address of a LAN client
MAC Address	MAC address of a LAN client
Leasetime Remaining	Remaining lease time for a DHCP client. Active DHCP lease holders will try to renew their DHCP leases after a half of the lease time passes.

Wireless

[[File:Networking_rutos_manual_status_network_wifi_{{{wifi}}}_v1.png|border|class=tlt-border]]

Field name	Description
SSID	The broadcasted SSID (Service Set Identifier) of the wireless network
Wireless MAC	The MAC (Media Access Control) address of the access point radio
Band	The band defines which frequency used
Signal	The signal quality between router's radio and some other device that is connected to the router
Bit rate	The maximum possible physical throughput that the router's radio can handle. Bit rate will be shared between router and other possible devices which connect to local Access Point (AP)
Mode	Connection mode. Can either be Access Point (AP) or Client. In AP mode others can connect to this router's wireless connection. In client mode router connects to other wireless networks
Encryption	The type of WiFi encryption used
Hostname	Device's hostname
IP address	Shows what IP address leased for device
MAC address	Device's MAC (Media Access Control) address
Signal	Received Signal Strength Indicator (RSSI). Signal's strength measured in dBm
RX rate	The rate at which packets are received from associated interface
TX rate	The rate at which packets are sent to associated interface

[[Category:{{{name}}} Status section]]