RUT955 Powering Options

RUT955 routers can be powered from a power socket or over an Ethernet port. Depending on your network architecture you can use the LAN1 port to power the device.

RUT955 routers can also be powered from a power socket and over Ethernet simultaneously. The power socket has higher priority meaning that the device will draw power from the power socket as long as it is available.

When a RUT955 device is switching from one power source to another it loses power for a fraction of a second and may reboot. The device will function correctly after the reboot.

Pin	Signal ID	T568A Color	T568B Color	Pins on plug face (socket is reversed)
1	TX+	white/green stripe	white/orange stripe
2	TX-	green solid	orange solid
3	RX+	white/orange stripe	white/green stripe
4		blue solid	blue solid
5	7 - 30 VDC	white/blue stripe	white/blue stripe
6	RX-	orange solid	green solid
7	GROUND	white/brown stripe	white/brown stripe
8	GROUND	brown solid	brown solid

Though the device can be powered over an Ethernet port it is not compliant with the IEEE 802.3af-2003 standard. Powering a RUT955 device from a IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.