TAP100 Remote Monitoring & Administration

Main Page > TAP Access Points > TAP100 > TAP100 Manual > TAP100 Remote Monitoring & Administration

TAP100 supports multiple monitoring and administration possibilities.

Remote control options

The TAP100 router supports the following remote control capabilities:

Remote control method	Can get parameters	Can set parameters
RMS
SSH
HTTP
JSON

RMS

The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the System → Administration → RMS page.

Public IP

If your device has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access

Remote HTTP access can be set up via the System → Administration → Access Control page.

SSH access

Remote SSH access can be set up via the System → Administration → Access Control page.

JSON-RPC

JSON-RPC access can be set up via the System → Administration → Access Control page. Note: As of RUTOS firmware version 7.0 and higher, it is enabled by default.