Template:Rms manual management commands reboot

From Teltonika Networks Wiki
Revision as of 14:42, 11 May 2018 by Dziugas (talk | contribs) (Created page with "The '''Reboot''' function is used to reboot devices selected from your device table. ---- * First select the device(s) that you wish to reboot: File:How to reboot device fr...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

The Reboot function is used to reboot devices selected from your device table.

  • First select the device(s) that you wish to reboot:

  • Scroll your mouse pointer to the Commands submenu (Management → Commands) and click "Reboot":

  • You will be prompted by a pop-up asking whether you really want to reboot the selected device(s). If you're ready to proceed, click "Yes":

  • The next pop-up box will display the status of each device. If the reboot request was successful, a green check mark with the words "This router won't be reachable for few minutes" will appear under the "Event" field for each device. At this point you can close the pop-up box:

NOTE: your devices will be unreachable for a few minutes and show as "Offline" in RMS.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Rms_manual_management_commands_reboot&oldid=10901"