Wireguard Peer To Peer Configuration example

==Introduction==

Introduction to a Peer-to-Peer WireGuard configuration example, this also covers LAN-TO-LAN connectivity aspect as well.

'''WireGuard''' is simple, fast, lean, and modern VPN that utilizes secure and trusted cryptography.

This page will show you an example on how to configure a basic tunnel between WireGuard interface and its peers.

<u><b>Note:</b> WireGuard is additional software that can be installed from the <b>Services → Package Manager</b> page</u> (in RUT9/RUT2 this page is located in <b>System → Package Manager</b>).

==Prerequisites==

----

For this example you need:

<ul>

<li>Three RUTOS devices</li>

<li>An end device to configure devices (PC, Laptop, Tablet or Smartphone) </li>

<li>One end device must have Public IP address</li>

<ul>

----

==WireGuard Instances==

To create Instance enter its name and click the <b>Add</b> button.

Then click the <b>Edit</b> [[File:Networking_rutx_manual_edit_button_v1.png]] button to configure it.

[[File: Wireguard.png]]

[[File: Wireguard_Add.png]]