Template:Networking rutos manual events reporting

From Teltonika Networks Wiki

The information in this page is updated in accordance with firmware version .


Summary

The Events Reporting feature provides the possibility to configure rules that inform via SMS or email when certain trigger events occur.

This page is an overview of the Events Reporting section for {{{name}}} devices.

Events Reporting Rules

The Events Reporting Rules section is used to manage existing Events Reporting rules and to add new ones. Events Reporting Rules trigger on certain, user specified events and send an SMS message or email to a specified number informing of the occurred event.

All possible trigger events are listed in the table below.

Event Event subtype
Config change Informs on changes to the device's configuration. Possible triggers are:
  • Any config change
  • Specific config change
New DHCP client Informs on new DHCP lease give outs. Possible triggers are:
  • Connected from LAN
Reboot Informs after device reboot occurrences. Possible triggers are:
  • From button
  • From Input/Output
  • From Ping Reboot
  • From wget Reboot
  • From Reboot Scheduler
  • From WebUI
  • From SMS
  • All
Startup Informs when device startup completed. Possible triggers are:
  • Device startup completed
SSH Informs on successful or unsuccessful SSH login attempts. Possible triggers are:
  • Successful authentication
  • Unsuccessful authentication
  • All
WebUI Informs on successful or unsuccessful HTTP/HTTPS login attempts. Possible triggers are:
  • Successful authentication
  • Unsuccessful authentication
  • All

Events Reporting Configuration

The Events Reporting Rules list is empty by default. Before you can begin configuration you must add at least one new rule. This can be done by clicking the 'Add' button:

After adding a rule you should be redirected to its configuration page.

Send email

When an Events Reporting rule is configured to send emails, the device (this {{{name}}}) will connect to an existing email account when a user specified trigger event occurs and send an email to another email address informing of the occurred event.

In order to send emails, the device requires access to an existing email account. You can configure email accounts in the System → Administration → [[{{{name}}} Administration#Recipients|Recipients]] page. Allowing access to less secure apps may be required for some email service providers.

[[File:Networking_rutos_manual_events_reporting_events_reporting_rules_send_email_dual_modem_{{{dualmodem}}}_v1.png|border|class=tlt-border]]

Field Value Description
Enable off | on; default: on Turns the rule on or off.
Event type Config change | Startup | New DHCP client | Reboot | SSH | WebUI ; default: Config change Event that will trigger the rule.
Event subtype Varies More specific event type that will trigger the rule.
Action Send email; default: Send email Selects the method of reporting on the specified event.
Subject string; default: none Subject of the sent email.
Message text on Event string; default: Router name - %rn; Event type - %et; Event text - %ex; Time stamp - %ts; Text to be included in the body of the report email.
Email account email account; default: none The account that will be used to send an email.
Recipient's email address email address; default: none Email address of the recipient.
Send test email - (interactive button) Sends an email based on the current configuration. This is used to test whether the configuration works as intended.

[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_events_reporting&oldid=123536"