SMS Forwarding Configuration Example

The information in this page is updated in accordance with 00.07.09.2 firmware version.

Introduction

This page contains instructions how to configure SMS forwarding. SMS forwarding can be utilized if there is a need to monitor received messages via HTTP, SMS or email.

Prerequisites

• Beeceptor account and created Mock server;
• Pre-configured email user;

SMS Forwarding To HTTP Configuration

Creating server In order to test the functionality, you will need to set up a server. There are many ways how you can create a server to which SMS forwarding will forward SMS. In this example we are going to be using a Beeceptor's Mock server. If you don't have a Beeceptor account yet – create it or login via Google account.

Specify your desired mock server's URL. Press on Create Mock Server.

Configuring device

Open router’s WebUI, navigate to Services → Mobile Utilities → SMS Gateway and press SMS forwarding tab.

File:SMS Forwarding To HTTP.png

Check Enable Enable SMS-Utilities rules forwarding to forward SMS Utilities rules. Enable "Don't save received message" if you don't want the message stored. Enable "Include sender's number" to forward the sender’s phone number. If Include sender’s number is enabled enter number value name. Set the "Mode" to choose who will receive the forwarded SMS. Enable "Encode message text to Base64" if encoding is necessary. Choose "HTTPS certificate verification" setting depending on your security requirements. Select the "Method" (GET or POST) based on the type of request you want to use. Enter the URL where the SMS should be forwarded. (For this configuration we are using beeceptor) Define the "Message value name" to represent the message text. Use "Extra data pair 1" to include additional parameters in the forwarded request. Use "Extra data pair 2" to include additional parameters in the forwarded request.