802.11r WiFi roaming configuration example

From Teltonika Networks Wiki
Revision as of 03:19, 26 September 2024 by Eward.Z (talk | contribs)

Introduction

This article provides a basic configuration example of WiFi roaming.

Prerequisites

  • Main gateway with WAN access (Any RUTOS router. RUTXR1 is used in this example)
  • Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUT955 (Router 2) are used in this example)
  • All devices on R_00.02.05.1 or newer firmware. Legacy firmware is not supported.

Before you start configuring the router turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=802.11r_WiFi_roaming_configuration_example&oldid=133030"