Template:Networking rutos manual mobile
The information in this page is updated in accordance with firmware version .
Summary
The Mobile page is used to configure mobile connection settings.
This manual page provides an overview of the Mobile page in {{{name}}} devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
General
The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.
SIM card settings
The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v4.png|border|class=tlt-border]]
Field | Value | Description |
---|---|---|
Deny data roaming | off | on; default: off | Denies data connection on roaming conditions. |
PIN | integer [0000..99999999]; default: none | SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored. |
Interface mob1s1a1 APN configuration
Field | Value | Description |
---|---|---|
Auto APN | on | off; default: on | Auto APN scans an internal APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database ( APN database ) |
APN | string; default: none | An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract. An APN Network Identifier cannot start with any of the following strings:
|
Authentication type | None | PAP | CHAP; default: None | Authentication method that your carrier uses to authenticate new connections on it's network |
Username | string; default: empty | Username provided by your carrier |
Password | string; default: empty | Password provided by your carrier |
Connection
Connection
Field | Value | Description |
---|---|---|
VoLTE | Auto | On | Off; default: Auto | Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data. |
Preferred network type | ||
Band selection | Auto | Manual; default: Auto | Network frequency band selection method. When set to Auto, the device connects to the band with the best connectivity conditions, while Manual provides the possibility to manually select the bands which the device will obliged to use. Selecting bands manually shows their duplex modes for 4G and 5G capable devices only. |
Low signal reconnect
The Low signal reconnect section is used to configure modem operator connection resetting based on signal strength .
Field | Value | Description | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Enable | off
LimitsData limitThe Data Limit section provides you with the possibility to set up a maximum used data cap for your SIM card. [[File:Networking_rutos_manual_mobile_limits_data_limit_{{{dualsim}}}.png|border|class=tlt-border]] To configure Data Limit press Edit
SMS limitThe SMS Limit section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card. [[File:Networking_rutos_manual_mobile_limit_sms_limit_{{{dualsim}}}.png|border|class=tlt-border]] To configure SMS Limit press Edit
Network selectionThe Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
Manual operator selectionTo select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'. [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]] Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed. Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes. Once the scan has finished, you will see the results in the 'Available operators'. In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'. Operators listThis section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC). By clicking Edit on a list you will be redirected to editing page in which you can enter operator codes for that list. UtilitiesSIM PIN management
PIN/PUK lock notificationIf you set an invalid PIN/PUK code or insert a locked/blocked SIM card, a side message will pop up with information that the SIM card is locked or blocked. Click 'Unlock SIM here` to open the modal window where you can enter the SIM card PIN/PUK codes. Side message where the SIM is locked Side message where the SIM is blocked
APN DatabaseAPN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records. Note: APN Database is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page. Adding new APNIn order to create new APN to database, insert required information and click Add button.
[[Category:{{{name}}} Network section]] |