TRB142 Mobile
Main Page > TRB Gateways > TRB142 > TRB142 Manual > TRB142 WebUI > TRB142 Network section > TRB142 Mobile
Summary
Template:Webui network mobile summary
Mobile Configuration Options
Template:Webui network mobile mobile configuration options
| FIELD NAME | VALUE | DESCRIPTION |
|---|---|---|
| PIN number | string; Default: " " | A personal identification number (PIN) is a numeric password used to authenticate a user to a system (in this case, the user to the SIM card) |
| APN | string; Default: " " | An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require to enter the APN just to complete the registration to a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract. NOTE: an APN Network Identifier cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*" |
| Auth Mode | CHAP | PAP | None; Default: None | The Authentication method that your GSM carrier uses to authenticate new connections on its network |
| Username | string; Default: " " | The username used to connect to your carrier’s network. This field becomes available when you select an Auth Mode (i.e., the selected Auth Mode is not “None”) |
| Password | string; Default: " " | The password used to connect to your carrier’s network |
| Use Mobile operator DNS | yes | no; Default: yes | When checked, indicates that the connection will use DNS server's automatically provided by your operator |