Reaching Cisco router console port remotely

From Teltonika Networks Wiki
Revision as of 11:43, 22 January 2019 by Dziugas (talk | contribs) (Created page with "Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → <b>USB Tools</b> → USB to Serial page: Fil...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Using RJ45 – USB type A or MiniUSB – USB type A configuration. Configured from the WebUI, Services → USB Tools → USB to Serial page:

Using RJ45 – RS232. To connect another DCE device to RUT955, a Null-modem (crossed) Male/Male cable should be used:

RS232 can be configured from the Services → RS232/RS485 → RS232 Configuration page. The following RS232 configuration should be used:

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Reaching_Cisco_router_console_port_remotely&oldid=26546"