Template:Netoworking rutxxx configuration example mikrotik openvpn

Introduction

OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities.

This guide provides a configuration example with details on how to configure OpenVPN connection between MikroTik and RUTxxx routers. The server will be MikroTik device and the client will be our RUTxxx router.

Prerequisites

• One RUTxxx router of any type
• One Mikrotik router (this configuration example was created using Mikrotik rb750gr3)
• Server must have a Public Static or Public Dynamic IP address
• At least one end device (PC, Laptop) to configure the routers
• WinBox application

Configuration scheme

[[File:|border|class=tlt-border]]

Server (Mikrotik) configuration

Connect to MikroTik by using WinBox application and press New Terminal.

Now create certificates by using these commands (these will be valid for 10 years):

/certificate

add name=ca-template common-name=example.com days-valid=3650 key-size=2048 key-usage=crl-sign,key-cert-sign

add name=server-template common-name=*.example.com days-valid=3650 key-size=2048 key-usage=digital-signature,key-encipherment,tls-server

add name=client-template common-name=client.example.com days-valid=3650 key-size=2048 key-usage=tls-client

Created certificates will need signing, use these commands:

sign ca-template name=ca-certificate

sign server-template name=server-certificate ca=ca-certificate

sign client-template name=client-certificate ca=ca-certificate

Now you need to export those certificates:

/certificate

export-certificate ca-certificate export-passphrase=""

export-certificate client-certificate export-passphrase=12345678

Now go to Files and export those certificates by simply dragging them to your desktop.

Now go back to Terminal and create a separate pool of IP addresses for clients by using this command:

/ip

pool add name="vpn-pool" ranges=192.168.8.10-192.168.8.99

Instead of editing the default encrypted profile, we need to create a new one. Assumption is your MikroTik will also be a DNS server. And while at it, you can create a bit more imaginative user/password:

/ppp

profile add name="vpn-profile" use-encryption=yes local-address=192.168.8.250 dns-server=192.168.8.250 remote-address=vpn-pool

secret add name=user profile=vpn-profile password=password

Adjust firewall by using this command:

/ip firewall filter

add chain=input protocol=tcp dst-port=1194 action=accept place-before=0 comment="Allow OpenVPN"

Now enable OpenVPN server interface:

/interface ovpn-server server

set default-profile=vpn-profile certificate=server-certificate require-client-certificate=yes auth=sha1 cipher=aes128,aes192,aes256 enabled=yes

Client (RUTxxx) configuration

Access RUTxxx WebUI and go to Service > VPN > OpenVPN. There create a new configuration by selecting role Client, writing New configuration name (anything you want) and pressing Add New button. It should appear after a few seconds. Then press Edit.

[[File:|border|class=tlt-border]]

Then apply the following configuration.

[[File:|border|class=tlt-border]]

1. Enable Instance.
2. Select Protocol (TCP).
3. Select Authentication (TLS/Password).
4. Select Encryption (AES-128-CBC 128).
5. Write Remote host/IP address (MikroTik public IP address).
6. Write Keep alive (10 120).
7. Write Remote network IP address (192.168.8.0).
8. Write Remote network IP netmask (255.255.255.0).
9. Write User name and Password which you created on Mikrotik (you created it by using this command: secret add name=user profile=vpn-profile password=password).
10. Upload Certificate authority, Client certificate, Client key (use those exported files).
11. Write Private key decryption password (you created it by using this command: export-certificate client-certificate export-passphrase=12345678).
12. Press Save.