Template:Networking rut manual system
Template:Networking rutos manual fw disclosure
Summary
The System page displays general system and memory information of the device.
This chapter of the user manual provides an overview of the System page for {{{name}}} devices.
System, Memory
The figure below is an example of the System0 page and the table below provides information on the fields contained in that page:
[[File:{{{file_device}}}]]
| Field | Description |
|---|---|
| Router name | The name of this device. |
| Host name | Hostname of the device. The hostname can be used instead of the LAN IP address to communicate with the device inside the local network. The hostname can be changed in the System → Administration → [[{{{name}}} Administration#General|General]] page. |
| Router model | Full brand name of the device. |
| Firmware version | Firmware version currently used by the device. The firmware can be upgraded from the System → [[{{{name}}} Firmware|Firmware]] page. You can download firmwares for {{{name}}} from [[{{{name}}}_Firmware_Downloads|here]]. |
| Kernel version | Kernel version currently used by the device. A kernel is a computer program responsible for connecting a device's software to its hardware. |
| Local device time | Current time as perceived by the device. Time settings can be adjusted in the Services → [[{{{name}}} NTP|NTP]] page. |
| Uptime | Amount of time that has passed since the device was last turned on or rebooted. |
| Load average | CPU load average (in %) over the last minute, 5 minutes and 15 minutes. |
| Temperature | Temperature of the modem inside of the device. |
| Used | Amount of random-access memory (RAM) that is currently in use by the device. |
| Cached | Amount of random-access memory (RAM) that is allocated for frequently accessed data storage. |
| Buffered | Amount of random-access memory (RAM) used by temporarily stored data before moving it to another location. |
[[Category:{{{name}}} Status section]]