TRB245 RCM
The ACMA regulatory arrangements require a supplier to apply a compliance label to a product before the product is supplied to the Australian market.
Description
For all ACMA regulatory arrangements, the compliance label is the Regulatory Compliance Mark (RCM). The RCM replaces the A-Tick and C-Tick compliance marks used under previous regulatory arrangements.
The RCM is a visible indication of a product's compliance with all applicable ACMA regulatory arrangements, including all technical and record-keeping requirements.
Standards applied
The conformity with the essential requirements has been demonstrated against the following standards:
| Standard | Description |
| ETSI EN 301 908-1 V11.1.1 / ETSI EN 301 908-2 V11.1.2 ETSI EN 301 908-13 V11.1.2 AS/CA S042.1: 2018 / AS/CA S042.4: 2018 |
Telecommunications (Mobile Equipment Air Interface) Technical Standard 2018 |
| AS/NZS 62368.1:2018 | Telecommunication (Customer equipment Safety) Technical Standard 2018 |
| AS/NZS 4268:2017 ETSI EN 300 328 V2.1.1 / ETSI EN 300 440 V2.1.1 ETSI EN 301 893 V2.1.1 / ETSI EN 303 413 V1.1.1 |
Radiocommunications (Short Range Devices) Standard 2014 |
| AS/NZS CISPR 32: 2015 | Radiocommunications (Electromagnetic Compatibility) Standard 2008 |
| AS&NZS 2772.2-2016 ARPANSA Standard RPS3-2002 |
Radiocommunications (Electromagnetic Radiation – Human Exposure) Standard 2014 |
Attachments
 |
 |
You can find the PDF version of the Declaration of Conformity here
Disclaimer:
Test reports that are referenced in declarations and certificates can be provided upon request. For the request to be approved, the recipient of the test reports should be a certification authority or certified test house. The recipients will be asked to sign a non-disclosure agreement (NDA).