Template:Networking rut956 first start configure your computer
This Wiki page contains the online version of the Quick Start Guide (QSG) for the RUT956 LTE Router. Here you will find an overview of the various components found on the front and back sides of a RUT956 device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a RUT956 device, you can also find a printed version of the Quick Start Guide in the device's package.
Front view
| No. | Description | |
|---|---|---|
| 1 | LAN Ethernet ports | |
| 2 | WAN Ethernet port | |
| 3 | LAN LEDs | |
| 4 | WAN LED | |
| 5 | RS485 interface |  |
| 6 | Power socket | |
| 7 | RS232 interface | |
| 8 | Input/Output connector | |
| 9 | Power LED | |
| 10 | Mobile connection status LED | |
| 11 | Mobile signal strength indication LEDs |
Back view
| No. | Description |  |
|---|---|---|
| 1 | LTE antenna connectors | |
| 2 | GPS antenna connector | |
| 3 | USB connector | |
| 4 | WiFi antenna connectors | |
| 5 | Reset button | |
| 6 | SIM card slots |
Connectors
| Power socket pinout |  |
||
|---|---|---|---|
| No. | Description | Wire color | |
| 1 | Power | Red | |
| 2 | Ground | Black | |
| 3 | I/O | Green | |
| 4 | I/O | White | |
| . | |||
Hardware installation
- Remove the SIM card slot tray(s) with the pin needle. Insert your SIM card(s) and push the tray(s) back into the router. Correct SIM card orientation can be seen in the figure below:
File:Rut956 sim card insertion v1.png - Attach 3G and WiFi antennas
- Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.
- Connect to the device wirelessly (SSID: RUT956_****) or use an Ethernet cable.
Template loop detected: Template:Networking device first start
Safety information
The RUT956 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
| Radio specifications | |
|---|---|
| RF technologies | GSM, GPRS, EDGE, UMTS/HSPA+, LTE, GNSS, WiFi |
| Max. RF power | 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@WiFi |
| Bundled accessories specifications* | |
| Power | AC/DC power adapter 9 V 1 A, 4 pin plug |
| GSM/WCDMA/LTE antenna | 698~868/1850~2690 MHz, 50 Ω, VSWR < 2, gain** 2 dBi, omnidirectional, SMA male connector |
| WiFi antenna | 2400~2483.5 MHz, 50 Ω, VSWR < 2, gain** 2 dBi, omnidirectional, RP-SMA male connector |
| GNSS antenna | 1575.42~1602 MHz, 2.2~5 VDC, VSWR < 1.5, active total gain** 28 dB (typ.), RHCP polarization, SMA male connector |
* Order code dependent.
** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
This sign on the package means that is necessary to read the User's Manual before you start using the device
This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste
Hereby, Teltonika declares that the radio equipment type RUT955 is in compliance with Directives: 2014/53/EU, 2014/35/EU, 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: https://teltonika-networks.com/product/rut956/