Template:Networking rut2xx first start hardware installation

From Teltonika Networks Wiki
Revision as of 13:26, 27 February 2019 by Dziugas (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Hardware installation

  1. Remove the SIM card slot tray with the pin needle. Insert your SIM card and push the tray back into the router. Correct SIM card orientation can be seen in the figure below:
    [[File:{{{file_sim}}}|{{{size_sim}}}px]]
  2. Attach 3G and WiFi antennas
  3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.
  4. Connect to the device wirelessly (SSID: {{{name}}}_****) or use an Ethernet cable.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut2xx_first_start_hardware_installation&oldid=28646"