Template:Networking rut9xx manual network wan
From Teltonika Networks Wiki
WAN
The WAN section displays information about the Main and Backup WAN connections. The figure below is an example of the Mobile page:
[[File:{{{file_wan}}}]]
Field | Description |
---|---|
Interface | WAN type. Possible values are:
|
Type | [[{{{name}}}_Mobile#Mobile_Configuration|Connection type]] or [[{{{name}}}_WAN#Common_Configuration|protocol]]. The value displayed in this field is dependent on used WAN type. Possible values are:
|
IP address | Router's WAN IP address |
WAN MAC | MAC address of the WAN network interface controller (WiFi radio or WAN Ethernet port). This field is only visible if main WAN is set to Wired or WiFi |
Netmask | A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes the device |
Gateway | Gateway of the default route - an IP address through which the router reaches the Internet |
DNS | DNS servers used by the main WAN connection |
Connected | Currently used WAN connection uptime |
Ports | Displays an image of the router's back panel with highlighted Ethernet ports that are currently in use |
WAN Failover Status | Displays the router's current WAN failover status |
Refresh | Refreshes all information fields in the page |
WAN settings can be customized via the Network → [[{{{name}}} WAN|WAN]] page.