RUT300 Logging in

From Teltonika Networks Wiki
Revision as of 10:23, 14 December 2020 by LorurnA (talk | contribs) (Created page with "__TOC__ ==Login to device== {{Template:Networking_rutx_first_start_login | file_login_a = Networking_rutx_first_start_login_to_device_figure_a_v1.png | file_login_b = | ip...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Login to device

  1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
  2. Use login information shown in image A when prompted for authentication.
  3. After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory, and you will not be able to interact with the router's WebUI before you change the password.
  4. When you change the router's password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router's main operating parameters.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT300_Logging_in&oldid=76300"