TAP200 Powering Options

From Teltonika Networks Wiki
Main Page > TAP Access Points > TAP200 > TAP200 Manual > TAP200 Powering Options

This chapter contains information on powering options supported by TAP200 access points.

Active PoE

The device can be powered by an ethernet cable via the ethernet port .

  • TAP200 devices support active PoE standard: 802.3af PoE Class 1
  • Working voltage levels: 44.0–57.0 V

RJ45 pinout:
Pin 10/100 mode B, DC on spares T568A Color T568B Color Pins on plug face (socket is reversed)
1 TX+
white/green stripe

white/orange stripe
2 TX-
green solid

orange solid
3 RX+
white/orange stripe

white/green stripe
4 DC+ 44–57 V
blue solid

blue solid
5 DC+ 44–57 V
white/blue stripe

white/blue stripe
6 RX-
orange solid

green solid
7 DC-
white/brown stripe

white/brown stripe
8 DC-
brown solid

brown solid