BAG·Tower
Main Page > General Information > Configuration Examples > Third party services > IoT platforms > BAG·Tower
BAG·Tower is a monitoring and prevention platform that is compatible with Teltonika-Netwokrs devices. Their main goal is to provide a complete solution to control your equipment, manage your asset fleet and its operations.
Introduction
This article contains step-by-step instructions on how to connect a Teltonika-Networks device to BAG·Tower platform.
Basic setup
- Create a BAG·Tower account.
- Create an asset on BAG·Tower platform.
- Connect device to BAG·Tower platform.
- Create a decoder for the device.
Create an account
- Register an account on BAG·Tower.
- Go to your specified email, find the email from BAG·Tower and click on the Signup now by clicking here link.
- In the new window enter a new password and press Send.
- Now you should have access to BAG·Tower platform.
Create an asset
- Login to your BAG·Tower account.
- In Asset Management -> Your assets press Add Asset button in Asset List section.
- Insert Picture Here
- In the popup window press Create An Asset Manually button.
- Insert Picture Here
- Enter your asset name and press Save button.
- Insert Picture Here
- After saving the asset should appear in the Asset List.
- Insert Picture Here
Connect device to BAG·Tower
- Go to the details page of the created BAG·Tower asset in Asset Management -> Your assets -> Asset List.
- Insert Picture Here
- In the Asset Detail page copy the generated API Key.
- Insert Picture Here
- Log in to Teltonika-Networks device, make sure the device is in Advanced mode and navigate to System -> CLI. Login using these credentials: Username - root, Password - Your set Admin password.
- Insert Picture Here
- Run the following command: sh -c "$(wget -qO - https://scripts.bagtower.bag-era.fr/install_push_teltonika.sh)" '' __API_KEY__ ,with __API_KEY__ replaced by the previously copied assets API Key. After that you should see something similar to this.
- Insert Picture Here
Create a decoder
- To understand the information that is being sent from the device BAG·Tower needs to have a decoder. To configure it go to BAG·Tower platform and in Asset Management -> Your assets -> Asset List click on details of an asset with the Status Anomaly detected.
- Insert Picture Here
- In the detail page click Create a Decoder button.
- Insert Picture Here
- Copy the content of Teltonika decoder in the code section. You can get the latest version of Teltonika decoder from BAG·Tower page. Pick a Frame and press Test Decoder.
- Insert Picture here
- Click on Save and Attach. Choose the Asset, Tag or Group to attach this decoder to. Then click the Save button.
- Insert Picture Here
- Now you should be all set and your device should now start periodically pushing information to BAG·Tower platform. Your device asset in BAG·Tower platform should now be Online and its Detail page should now show graphs with information from device. If that is not the case try repeating these steps or contacting support for more information.