Template:Networking rut manual qos
The information in this page is updated in accordance with the [[Media:_WEBUI.bin|]] firmware version.
Summary
QoS provides the possibility to prioritize network traffic based on hosts, ports or services and limit download & upload speeds on a selected interface.
This chapter of the user manual provides an overview of the QoS page in {{{name}}} devices.
Interfaces
The Interfaces section is used to set up download and upload speed limits on the device's network interfaces.
Field | Value | Description |
---|---|---|
Interface | WAN | LAN | WiFi_WAN | Mobile; default: none | Interface to which the rule applies. |
Enable | yes | no; default: no | Turns the rule on or off. |
Calculate overhead | yes | no; default: no | Decreases upload and download ratio to prevent link saturation. |
Download speed (kbit/s) | integer; default: none | Maximum download speed for the specified interface. |
Upload speed (kbit/s) | integer; default: 128 | Maximum upload speed for the specified interface, |
Classification Rules
Field | Value | Description |
---|---|---|
Target | Priority | Express | Normal | Low; default: Normal | Target to which the rule will be applied. |
Source host | All | ip; default: All | Host(s) from which data will be transmitted. |
Destination host | All | ip; default: All | Host(s) to which data will be transmitted |
Protocol | All | TCP | UDP | ICMP | -- custom --; default: All | Data transmission protocol to match the rule. |
Ports | All | integer [0..65535]; default: All | Port number(s) to match the rule. You can enter multiple ports by separating them by commas (e.g., 22,53,80). |
Number of bytes | integer; default: none | Maximum number of bytes for this connection. |
[[Category:{{{name}}} Services section]]