Network share using SAMBA
Revision as of 18:09, 21 April 2022 by Shivang.amin (talk | contribs)
Contents
Introduction
This article provides information and step by step guide to configure samba share on Teltonika routers.
The information on this page is updated in accordance with RUTX_R_00.07.01.4 firmware version.
Samba share is a software package used to provide secure, stable, and fast file and print service for clients using SMB/CIFS protocol. It is compatible to use with windows and Linux systems. SMB is a network file sharing protocol and CIFS is a network file system protocol. CIFS is a successor of SMB, and both runs on tcp or udp using port 137 and 138 for udp, 039 and 445 for tcp.
Prerequisites
You will need:
- RUTX router running FW version RUTX_R_00.07.01.4 or newer.
- A computer running Windows OS.
- A USB flash drive.
Instructions
- Connect a USB Drive to your RUTX router and connect your computer to routers Lan using cable or wifi.
- Login to the router's WebUI, go the Services → USB Tools → General page and verify if your USB is mounted.