529
edits
Changes
Data transfer from Modbus TCP to Modbus RTU Gateway (view source)
Revision as of 15:45, 8 February 2023
, 15:45, 8 February 2023→Configuring the router
Follow these steps to set up the Modbus gateway:
Follow these steps to set up the Modbus gateway:
* Navigate to '''Services -> Modbus -> Modbus TCP over Serial Gateway'''.
* Navigate to '''Services -> Modbus -> Modbus TCP over Serial Gateway'''
* Input Configuration name.
* Input Configuration name
* Select device: '''RS485/RS232/USB'''.
* Select device: '''RS485/RS232/USB'''
* Press '''Add'''.
* Press '''Add'''
[[File:Modbusupdategateway1.png|1000px|border|class=tlt-border]]
[[File:Modbusupdategateway1.png|1000px|border|class=tlt-border]]
* In the configuration section, press '''Enable''' to enable the serial interface.
* In the configuration section, press '''Enable''' to enable the serial interface
* In the Serial '''Type''' section, select '''Modbus gateway'''. ////editable
* In the Serial '''Type''' section, select '''Modbus gateway'''. ////editable
You may need to change configuration depending on your needs, just make sure that identical settings are set here and in RTU simulator: Baud rate, data bits, parity, stop bits, flow control.
You may need to change configuration depending on your needs, just make sure that identical settings are set here and in RTU simulator: Baud rate, data bits, parity, stop bits, flow control
[[File:Navigateandenable.png|border|class=tlt-border]]
[[File:Navigateandenable.png|border|class=tlt-border]]
This will expand more customization options:
This will expand more customization options:
* '''Listening IP''' – IP interface on which you are listening for incoming connections (input 0.0.0.0 to listen on any IP address).
* '''Listening IP''' – IP interface on which you are listening for incoming connections (input 0.0.0.0 to listen on any IP address)
* '''Port''' – Port number for Modbus gateway (default port is 502).
* '''Port''' – Port number for Modbus gateway (default port is 502)
* '''Slave ID''' configuration type – User defined or obtained from TCP.
* '''Slave ID''' configuration type – User defined or obtained from TCP
* '''Slave ID''' – preconfigured Slave ID number.
* '''Slave ID''' – preconfigured Slave ID number
[[File:Moreconfigurationoptions.png|border|class=tlt-border]]
[[File:Moreconfigurationoptions.png|border|class=tlt-border]]