8,949
edits
Changes
Template:Networking tswos manual diagnostics (view source)
Revision as of 14:48, 12 October 2023
, 14:48, 12 October 2023Created page with "{{Template: Networking_rutos_manual_fw_disclosure | fw_version ={{Template: Networking_rutos_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} __TOC__ ==..."
{{Template: Networking_rutos_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
}}
}}
__TOC__
==Network Diagnostics==
===Diagnostics===
----
This <b>Diagnostcis</b> section is used to execute simple network diagnostic tests, including ping, traceroute and nslookup.
[[File:Networking_tswos_manual_diagnostics_network_diagnostics.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Method</td>
<td>Ping {{!}} Traceroute {{!}} Nslookup; default: <b>Ping</b></td>
<td>Specifies the diagnostics method.
<li>Ping - sends ICMP requests to the specified address.</li>
<li>Traceroute - displays the path that packets have to take in order to reach the specified address.</li>
<li>Nslookup - obtains domain name address and IP address mapping information.</li>
</td>
</tr>
<tr>
<td>Protocol</td>
<td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
<td> Selects the IP (Internet Protocol) version.</td>
</tr>
<tr>
<td>Address</td>
<td>ip; default: <b>none</b></td>
<td> IP address or hostname to perform the diagnostic test on.</td>
</tr>
<tr>
<td>Perform</td>
<td>-(interactive) button</td>
<td>Performs the diagnostic test.</td>
</tr>
</table>
===Cable Diagnostics===
----
This <b>Cable Diagnostcis</b> service is dedicated to provide information about cable status and length. Full cable diagnostic is performed only when the cable is connected to the switch device. When the cable is fully connected only the cable length measurements will be provided. Note: the provided cable information may not be fully accurate and margin of error could be expected.
To run cable diagnostic, select ports and press 'Run Diagnostic' button:
[[File:Networking_tswos_manual_diagnostics_cable_diagnostics.png|border|class=tlt-border]]
[[Category:{{{name}}} Services section]]
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
}}
}}
__TOC__
==Network Diagnostics==
===Diagnostics===
----
This <b>Diagnostcis</b> section is used to execute simple network diagnostic tests, including ping, traceroute and nslookup.
[[File:Networking_tswos_manual_diagnostics_network_diagnostics.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Method</td>
<td>Ping {{!}} Traceroute {{!}} Nslookup; default: <b>Ping</b></td>
<td>Specifies the diagnostics method.
<li>Ping - sends ICMP requests to the specified address.</li>
<li>Traceroute - displays the path that packets have to take in order to reach the specified address.</li>
<li>Nslookup - obtains domain name address and IP address mapping information.</li>
</td>
</tr>
<tr>
<td>Protocol</td>
<td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
<td> Selects the IP (Internet Protocol) version.</td>
</tr>
<tr>
<td>Address</td>
<td>ip; default: <b>none</b></td>
<td> IP address or hostname to perform the diagnostic test on.</td>
</tr>
<tr>
<td>Perform</td>
<td>-(interactive) button</td>
<td>Performs the diagnostic test.</td>
</tr>
</table>
===Cable Diagnostics===
----
This <b>Cable Diagnostcis</b> service is dedicated to provide information about cable status and length. Full cable diagnostic is performed only when the cable is connected to the switch device. When the cable is fully connected only the cable length measurements will be provided. Note: the provided cable information may not be fully accurate and margin of error could be expected.
To run cable diagnostic, select ports and press 'Run Diagnostic' button:
[[File:Networking_tswos_manual_diagnostics_cable_diagnostics.png|border|class=tlt-border]]
[[Category:{{{name}}} Services section]]