234
edits
Changes
→Prerequisites & Topology
'''Before proceeding with the confuration, ensure that all requirements are met:'''
'''Before proceeding with the confuration, ensure that all requirements are met:'''
# Before starting you need to have 3 different WAN connections. In this case we are going to use: '''Wi-fi WAN''', '''Wired WAN''' and '''Mobile WAN'''.These interfaces have to be preconfigured.
# Before starting you need to have 3 different WAN connections. In this case we are going to use: '''[https://wiki.teltonika-networks.com/view/WiFi_WAN_example Wi-fi WAN]''', '''Wired WAN''' and '''Mobile WAN'''.These interfaces have to be preconfigured.
[[File:PBR_MAIN_IMG.png|border|class=tlt-border|center]]
[[File:PBR_MAIN_IMG.png|border|class=tlt-border|center]]
----
----
click [[File:Add Button.png|40x70px]] and aplly this to the route:
click [[File:Add Button.png|40x70px]] and aplly this to the route:
#Select Interface: '''WifiWan''' | Enter Target: ''''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.100.1'''
#Select Interface: '''WifiWan''' | Enter Target: '''0.0.0.0''' | Enter IPv4-Netmask: '''0.0.0.0''' | Enter IPv4-Gateway: '''192.168.1.1 (Note: Use the Wi-Fi network's gateway. The current LAN gateway in use is 192.168.100.1. However, the correct gateway to route correctly will be the next hop address. This means the router gateway providing the Wi-Fi WAN should be used. In my case, this gateway is 192.168.1.1.)'''
[[File:PBR_P_ROUTE_1.png|border|class=tlt-border|center|1000x300px]]
[[File:PBR_P_ROUTE_111.png|border|class=tlt-border|center|1000x300px]]
====Creating Wired Wan Routing Table====
====Creating Wired Wan Routing Table====