92
edits
Changes
IPSec Tunnel w/CA Certs Configuration (view source)
Revision as of 23:05, 1 July 2024
, Monday at 23:05no edit summary
That each RUT device can ping the other's LAN IP. In this case 192.168.3.1 for RUT1 & 192.168.14.1 for RUT2.
That each RUT device can ping the other's LAN IP. In this case 192.168.3.1 for RUT1 & 192.168.14.1 for RUT2.
And that LAN device on RUT1 can ping LAN device on RUT2.
And that LAN device on RUT1 can ping LAN device on RUT2.
* First make sure each device has been rebooted at least once after you have finished configuring the previous steps.
* First make sure each device has been rebooted at least once after you have finished configuring the previous steps.
Here we will confirm that LAN devices behind either RUTxxx devices are able to communicate with each other.
Here we will confirm that LAN devices behind either RUTxxx devices are able to communicate with each other.
[[File:RUT END-To END Example Image.png|frame|none]]
The figure above depicts two RUTxxx routers (RUT1 and RUT2) connected by an IPsec tunnel via their WAN interfaces. Where each RUT router has a LAN device connected that has received a DHCP address.
* Attach a Windows/MacOS/Linux PC via ethernet or wifi to RUT1 LAN. Remove or disable any other active interfaces on your PC.
* Attach a Windows/MacOS/Linux PC via ethernet or wifi to RUT1 LAN. Remove or disable any other active interfaces on your PC.