Teltonika Networks Wiki

Changes

SNMP configuration example (view source)

Revision as of 14:53, 13 August 2024

5,975 bytes removed ,  13 August
no edit summary
Line 169: Line 169:  
Trap rules describe on what event SNMP agent should send Trap messages. There are certain rules which can be set up using Teltonika WebUI depending on physical configuration of the device.
 
Trap rules describe on what event SNMP agent should send Trap messages. There are certain rules which can be set up using Teltonika WebUI depending on physical configuration of the device.
   −
<table class="nd-mantable">
  −
    <tr>
  −
        <th>Trap type</th>
  −
        <th>Rule name</th>
  −
      <th>Value</th>
  −
      <th>Explanation</th>
  −
    </tr>
  −
    <tr>
  −
        <td>GSM</td>
  −
      <td>Signal strength</td>
  −
      <td>Minimal mobile signal strength</td>
  −
      <td>Teltonika device will send trap message when mobile signal strength falls lower than specified</td>
  −
    </tr>
  −
    <tr>
  −
        <td>GSM</td>
  −
      <td>Network type</td>
  −
      <td>This trap does not have value</td>
  −
      <td>Teltonika device will send trap message when mobile connection establishes or changes</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Input/Output</td>
  −
      <td>Input(3)</td>
  −
      <td>Inactive/Active/Both</td>
  −
      <td>Teltonika device will send trap message when Digital input value changes to specified value</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Input/Output</td>
  −
      <td>Output(4)</td>
  −
      <td>Inactive/Active/Both</td>
  −
      <td>Teltonika device will send trap message when Digital output value changes to specified value</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Config change</td>
  −
      <td>All/AVL/Buttons/Call utilities/Hotspot/CLI/DDNS/DHCP/DMVPN/SSH/Email to SMS/Wake on LAN/Events Reporting/Firewall/USB tools/GPS/Site blocking/IO juggler/IO scheduler/IP block/IPsec/Landing page/Modbus server/Modbus TCP client/Modbus gateway/MQTT broker/MQTT publisher/Multi AP/Failover/Network/NTP client/NTP server/OpenVPN/Mobile operator list/Overview/Printer server/Package restore/Reboot scheduler/Ping reboot/Post/get/PPTP/Proxy blocker/Profiles/Mobile data limit/RMS/Users management/RS console/RS modbus/RS modem/RS overIP/Fota/Sim switch/Simcard/SMS gateway/SMS utilities/SNMP/SNMP Trap/SQM/Stunnel/System/Telnet/Web server/Traffic logging/User groups/VRRP/Widget/WiFi scanner/Wireless/L2TP</td>
  −
      <td>Teltonika device will send trap message when configuration changes were done to specified value</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>New DHCP client</td>
  −
      <td>All/Connected from LAN/Connected from WiFi</td>
  −
      <td>Teltonika device will send trap message when new DHCP client connected to the device</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>New DHCP client</td>
  −
      <td>All/Connected from LAN/Connected from WiFi</td>
  −
      <td>Teltonika device will send trap message when new DHCP client connected to the device</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Reboot</td>
  −
      <td>All/From Web UI/From input/output/From ping reboot/From wget reboot/From reboot scheduler/From button/From SMS</td>
  −
      <td>Teltonika device will send trap message when the device reboots by type</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Startup</td>
  −
      <td>All/Device startup completed/After unexpected shutdown</td>
  −
      <td>Teltonika device will send trap message when device startups by type</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>SSH</td>
  −
      <td>All/Succesful authentication/Unsuccesful authentication</td>
  −
      <td>Teltonika device will send trap message when there is SSH connection authentication</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Web UI</td>
  −
      <td>All/Succesful authentication/Unsuccesful authentication</td>
  −
      <td>Teltonika device will send trap message when there is Web UI connection authentication</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>New WiFi client</td>
  −
      <td>All/Connected/Disconnected</td>
  −
      <td>Teltonika device will send trap message when there is new WiFi client</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Mobile data</td>
  −
      <td>All/Connected/Disconnected</td>
  −
      <td>Teltonika device will send trap message when there is Mobile data connection</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>WAN failover</td>
  −
      <td>All/Switched to main/Switched to failover</td>
  −
      <td>Teltonika device will send trap message when there is WAN failover</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>SMS</td>
  −
      <td>SMS received</td>
  −
      <td>Teltonika device will send trap message when there is new SMS sent to device</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Signal strength</td>
  −
      <td>All/-121dBm-113dBm/-113dBm-98dBm/-98dBm-93dBm/-93dBm-75dBm/-75dBm-60dBm/-60dBm-50dBm</td>
  −
      <td>Teltonika device will send trap message when the signal strength reaches provided threshold</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Hotspot client</td>
  −
      <td>Connected</td>
  −
      <td>This trap does not have value</td>
  −
      <td>Teltonika device will send trap message when a client connects to a hotspot interface.</td>
  −
    </tr> 
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Sim switch</td>
  −
      <td>All/Changing to SIM1/Changing to SIM2</td>
  −
      <td>Teltonika device will send trap message when there is a SIM switch in the device</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Port state</td>
  −
      <td>All/Link state/Link speed/Unplugged/Plugged in/LAN1/LAN2/LAN3/LAN4/WAN</td>
  −
      <td>Teltonika device will send trap message when there is port state change</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>Topology changes</td>
  −
      <td>Topology changes</td>
  −
      <td>Teltonika device will send trap message when there is topology changes</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Events log</td>
  −
      <td>GPS</td>
  −
      <td>All/Left geofence/Entered geofence</td>
  −
      <td>Teltonika device will send trap message when there is changes in GPS</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Hotspot client</td>
  −
      <td>Disconnected</td>
  −
      <td>This trap does not have value</td>
  −
      <td>Teltonika device will send trap message when a client disconnects to a hotspot interface.</td>
  −
    </tr>
  −
<table>
   
====Events log====
 
====Events log====
 
----
 
----
−
<table>
+
<table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Event</th>
 
         <th>Event</th>
Line 324: Line 184:  
     <tr>
 
     <tr>
 
         <td><b>Reboot</b></td>
 
         <td><b>Reboot</b></td>
−
         <td>All | From Web UI | From ping reboot | From reboot scheduler | From button; default: <b>All</b></td>
+
         <td>All | From Web UI | From ping reboot | From reboot scheduler | From button | From SMS; default: <b>All</b></td>
 
         <td>Informs on if the device was rebooted.</td>
 
         <td>Informs on if the device was rebooted.</td>
 
     </tr>
 
     </tr>
Line 334: Line 194:  
     <tr>
 
     <tr>
 
         <td><b>GPS</b></td>
 
         <td><b>GPS</b></td>
−
         <td>All {{!}} Entered geofence {{!}} Left geofence; default: <b>All</b></td>
+
         <td>All | Entered geofence | Left geofence; default: <b>All</b></td>
 
         <td>Informs on when the device has entered or left a user defined geofence zone.</td>
 
         <td>Informs on when the device has entered or left a user defined geofence zone.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td><b>Mobile data</b></td>
 
         <td><b>Mobile data</b></td>
−
         <td>All {{!}} Connected {{!}} Disconnected; default <b>All</b></td>
+
         <td>All | Connected | Disconnected; default <b>All</b></td>
 
         <td>Informs on changes to the state of the device's mobile connection.</td>
 
         <td>Informs on changes to the state of the device's mobile connection.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td><b>New DHCP client</b></td>
 
         <td><b>New DHCP client</b></td>
−
         <td>All | Connected from LAN | Connected from WiFi | default <b>All</b></td>
+
         <td>All | Connected from LAN | Connected from WiFi; default <b>All</b></td>
 
         <td>Informs on new DHCP lease give outs.</td>
 
         <td>Informs on new DHCP lease give outs.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td><b>Ports state</b></td>
 
         <td><b>Ports state</b></td>
−
         <td>All {{!}} Link speed {{!}} Link state {{!}} Unplugged {{!}} Plugged in {{!}} Specific port; default: <b>All</b></td>
+
         <td>All | Link speed | Link state | Unplugged | Plugged in | Specific port; default: <b>All</b></td>
 
         <td>Informs on Ethernet port state (plugged in or unplugged) or speed (100 Mbps or 1000 Mbps) changes.</td>
 
         <td>Informs on Ethernet port state (plugged in or unplugged) or speed (100 Mbps or 1000 Mbps) changes.</td>
 
     </tr>
 
     </tr>
Line 359: Line 219:  
     <tr>
 
     <tr>
 
         <td><b>Signal strength</b></td>
 
         <td><b>Signal strength</b></td>
−
         <td>All {{!}} - 121 dBm - 113 dBm {{!}} - 113 dBm - 98 dBm {{!}} - 98 dBm - 93 dBm {{!}} - 93 dBm - 75 dBm {{!}} - 75 dBm - 60 dBm {{!}} - 60 dBm - 50 dBm; default: <b>All</b></td>
+
         <td>All | - 121 dBm - 113 dBm | - 113 dBm - 98 dBm | - 98 dBm - 93 dBm | - 93 dBm - 75 dBm | - 75 dBm - 60 dBm | - 60 dBm - 50 dBm; default: <b>All</b></td>
 
         <td>Informs on signal strength changes.</td>
 
         <td>Informs on signal strength changes.</td>
 
     </tr>
 
     </tr>
Line 379: Line 239:  
     <tr>
 
     <tr>
 
         <td><b>WAN failover</b></td>
 
         <td><b>WAN failover</b></td>
−
         <td>All {{!}} Switched to failover {{!}} Switched to main; default: <b>All</b></td>
+
         <td>All | Switched to failover | Switched to main; default: <b>All</b></td>
 
         <td>Informs on WAN failover occurrences.</td>
 
         <td>Informs on WAN failover occurrences.</td>
−
     </tr>|}}
+
     </tr>
 
     <tr>
 
     <tr>
 
         <td><b>WebUI</b></td>
 
         <td><b>WebUI</b></td>
Line 389: Line 249:  
     <tr>
 
     <tr>
 
         <td><b>New WiFi client</b></td>
 
         <td><b>New WiFi client</b></td>
−
         <td>All {{!}} Connected {{!}} Disconnected; default: <b>All</b></td>
+
         <td>All | Connected | Disconnected; default: <b>All</b></td>
 
         <td>Informs on new WiFi clients. Possible triggers are:</td>
 
         <td>Informs on new WiFi clients. Possible triggers are:</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
   
----
 
----
 
To create new rule chose action and press "Add" button, specify rule values and save:
 
To create new rule chose action and press "Add" button, specify rule values and save:
Line 399: Line 258:  
[[File:SNMP_config_example_7.8_2.png|1000px]]
 
[[File:SNMP_config_example_7.8_2.png|1000px]]
 
----
 
----
−
Enable trap rule and press "Save".
+
Modify the trap to your needs:
 
[[File:SNMP_config_example_7.8_3.png|1000px]]
 
[[File:SNMP_config_example_7.8_3.png|1000px]]
 
----
 
----
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/130766"