1,395
edits
Changes
→General Settings
The <b>General Settings</b> section is used to set up the main DNS parameters. Refer to the table below for information on each configuration field.
The <b>General Settings</b> section is used to set up the main DNS parameters. Refer to the table below for information on each configuration field.
[[File:Networking_rutos_manual_dns_general_settings_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dns_general_settings_v3.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Log queries</td>
<td>Inherited DNS servers</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Inherited server list</td>
<td>Write received DNS requests to syslog.</td>
<td>DNS Servers that were inherited from WAN interfaces.</td>
</tr>
</tr>
<tr>
<tr>
<td>DNS forwardings</td>
<td>DNS servers</td>
<td>Hostname (domain name) {{!}} IP address (ip); default: <b>none</b></td>
<td>IP address (ip); default: <b>none</b></td>
<td>List of DNS servers to forward requests to. See the dnsmasq -S option man page for syntax details.</td>
<td>List of DNS servers to forward requests to. See the dnsmasq -S option man page for syntax details. Specify servers to complement inherited ones.</td>
</tr>
</tr>
<tr>
<tr>
<td>Addresses</td>
<td>Static addresses</td>
<td>Hostname (domain name) {{!}} IP address (ip); default: <b>none</b></td>
<td>Hostname (domain name) {{!}} IP address (ip); default: <b>none</b></td>
<td>List of IP addresses for queried domains. See the dnsmasq -A option man page for syntax details.</td>
<td>List of IP addresses for queried domains. See the dnsmasq -A option man page for syntax details.</td>
<td>off {{!}} on; default: <b>on</b></td>
<td>off {{!}} on; default: <b>on</b></td>
<td>Discards upstream RFC1918 responses. When enabled, the device will not resolve domain names for internal hosts.</td>
<td>Discards upstream RFC1918 responses. When enabled, the device will not resolve domain names for internal hosts.</td>
</tr>
</table>
===Advanced Settings===
The <b>Advanced Settings</b> section is used to set up some of the more specific DNS parameters. Refer to the table below for information on each configuration field.
[[File:Networking_rutos_manual_dns_advanced_settings_v3.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
</tr>
<tr>
<tr>
<td>Local Service Only</td>
<td>Custom redirect</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Hostname (domain name) {{!}} IP address (ip); default: <b>none</b></td>
<td>Limit DNS service to subnets interfaces on which we are serving DNS.</td>
<td>Specify server for a domain. This is intended for private nameservers.</td>
</tr>
</tr>
<tr>
<tr>
<td>Prevent DHCP and DNS requests listening on these interfaces. Leave empty to listen on all interfaces.</td>
<td>Prevent DHCP and DNS requests listening on these interfaces. Leave empty to listen on all interfaces.</td>
</tr>
</tr>
<tr>
<tr>
<th>Field</th>
<td>Local Service Only</td>
<th>Value</th>
<td>off {{!}} on; default: <b>off</b></td>
<th>Description</th>
<td>Limit DNS service to subnets interfaces on which we are serving DNS.</td>
</tr>
<tr>
<td>Log queries</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Write received DNS requests to syslog.</td>
</tr>
</tr>
<tr>
<tr>