Line 186: |
Line 186: |
| <br> | | <br> |
| A new window will pop-out where you will be able to specify additional settings. | | A new window will pop-out where you will be able to specify additional settings. |
− | *'''Enable the instance'''
| + | #'''Enable the instance''' |
− | *Choose '''LAN''' as the source zone.
| + | #Choose '''LAN''' as the source zone. |
− | *Leave the source IP field '''‘any’''' or specify a LAN network to block.
| + | #Choose '''Device (input)''' as the Destination zone. |
− | *In the action field choose '''‘Drop’'''.
| + | #Choose '''5000''' as Destination port. |
| + | #In the action field choose '''‘Drop’'''. |
| | | |
− | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_11.png|alt=Firewall traffic rule to deny single port for LAN network configuration|border|class=tlt-border|1000px]] | + | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_11_edit.png|alt=Firewall traffic rule to deny single port for LAN network configuration|border|class=tlt-border|1000px]] |
| | | |
| Scroll down and press '''‘Save & Apply’'''. | | Scroll down and press '''‘Save & Apply’'''. |
Line 209: |
Line 210: |
| [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_12.png|alt=Firewall traffic rule to allow a single host on one port|border|class=tlt-border|1000px]] | | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_12.png|alt=Firewall traffic rule to allow a single host on one port|border|class=tlt-border|1000px]] |
| | | |
− | * set the source IP address to the IP address of the host.
| + | A new window will pop-out where you will be able to specify additional settings. |
− | *In the action field choose '''‘Accept’'''.<br>
| + | #'''Enable the instance''' |
| + | #Choose '''LAN''' as the source zone. |
| + | #Choose '''192.168.1.11''' as the Source IP address. |
| | | |
− | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_13.png|alt=Firewall traffic rule to allow a single host on one port configuration|border|class=tlt-border|1000px]] | + | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_13_edit.png|alt=Firewall traffic rule to allow a single host on one port configuration|border|class=tlt-border|1000px]] |
| | | |
| Scroll down and press '''‘Save & Apply’'''. | | Scroll down and press '''‘Save & Apply’'''. |
Line 234: |
Line 237: |
| | | |
| A new window will pop-out where you will be able to specify additional settings. | | A new window will pop-out where you will be able to specify additional settings. |
| + | #'''Enable the instance''' |
| + | #Choose '''TCP''' Protocol. |
| + | #In the Source zone choose '''wan'''. |
| + | #In the source IP enter the IP address from which you want to be able to access the WebUI. |
| + | #Choose the Destination ports which should be reachable. |
| + | #In the action field choose '''‘Accept’'''.<br> |
| | | |
− | * In the source IP enter the IP address from which you want to be able to access the WebUI.
| + | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_16_edit.png|alt=Firewall traffic rule to allow web access from WAN configuration|border|class=tlt-border|1000px]] |
− | *Destination zone should be set to Device (input).
| |
− | *In the destination IP address choose the IP address of the router.
| |
− | *In the action field choose '''‘Accept’'''.<br>
| |
− | | |
− | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_16.png|alt=Firewall traffic rule to allow web access from WAN configuration|border|class=tlt-border|1000px]] | |
| | | |
| | | |
Line 269: |
Line 273: |
| <br> | | <br> |
| A new window will pop-out where you will be able to specify additional settings. | | A new window will pop-out where you will be able to specify additional settings. |
| + | #'''Enable the instance''' |
| + | #Choose '''TCP+UDP''' Protocol. |
| + | #In the Source zone choose '''lan'''. |
| + | #In the destination port field enter the range of ports you wish to deny (For example, '''‘1500-1700’'''), or list specific ports by leaving spaces in-between port numbers (For example, '''‘80 443'''’). |
| + | #In the action field choose '''‘Drop’'''. |
| | | |
− | *Select '''<nowiki/>'TCP+UDP'''' as protocol.
| + | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_19_edit.png|alt=Firewall traffic rule to block a range of ports|border|class=tlt-border|1000px]] |
− | *Select source zone '''lan'''.
| |
− | *In the destination port field enter the range of ports you wish to deny (For example, '''‘1500-1700’'''), or list specific ports by leaving spaces in-between port numbers (For example, '''‘80 443'''’).
| |
− | *In the action field choose '''‘Drop’'''.
| |
− | | |
− | [[File:Networking_rutos_configuration_example_firewall_traffic_rules_7.8_19.png|alt=Firewall traffic rule to block a range of ports|border|class=tlt-border|1000px]] | |
| | | |
| You can specify additional settings as you wish. | | You can specify additional settings as you wish. |