Changes

[[File:Allowlan1tolan2pingoriginal.png|border|class=tlt-border|]]

[[File:Allowlan1tolan2pingoriginal.png|border|class=tlt-border|]]

To disable VLAN to VLAN communication, navigate to '''Network -> Firewall -> General Settings'''. Press '''Edit''' on the '''LAN''' zone (lan -> wan), click on '''Forward''' and select '''Drop or Reject'''. Make sure that all created VLANs are added in the Covered networks tab:

To disable VLAN to VLAN communication, navigate to '''Network -> Firewall -> General Settings'''. Press '''Edit''' on the '''LAN''' zone (lan -> wan).

 

 

Click on '''Forward''' and select '''Drop or Reject'''. Make sure that all created VLANs are added in the Covered networks tab:

[[File:Disablevlantovlandefaultv2.png|border|class=tlt-border|]]

[[File:Disablevlantovlandefaultv2.png|border|class=tlt-border|]]

[[File:3zonetopology.png|600px|border|class=tlt-border]]

[[File:3zonetopology.png|600px|border|class=tlt-border]]

To start with, we will need to create new firewall zones: LAN1, LAN2 and LAN3. To add new zones, navigate to '''Network -> Firewall -> General Settings'''. In the Zones section, press ADD button to add a new zone.

To start with, we will need to create new firewall zones: LAN1, LAN2 and LAN3. To add new zones, navigate to '''Network -> Firewall -> General Settings'''. In the Zones section, press [[File:Add Button.png|60x90px]] to add a new zone.

[[File:Addnewfwzone1v1.png|border|1000px|class=tlt-border|]]

[[File:Addnewfwzone1v1.png|border|1000px|class=tlt-border|]]

A new window will open, there configure the settings according to the points below and press Save & Apply.:

A new window will open, there configure the settings according to the points below and press [[File:Save & Apply.png|100x30px]].:

<table class="nd-othertables_2">

<table class="nd-othertables_2">

<tr>

<tr>