40
edits
Changes
Draft:802.11r WiFi roaming configuration example (view source)
Revision as of 04:51, 26 September 2024
, Yesterday at 04:51no edit summary
==Prerequisites==
==Prerequisites==
* Main gateway with WAN access (Any RUTOS router. RUTXR1 is used in this example)
* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUT955 (Router 2) are used in this example)
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)
* All devices on <b><i>R_00.02.05.1</i></b> or newer firmware. Legacy firmware is not supported.
* The information in this page is updated in accordance with <b><i>R_00.07.09</i></b> firmware version.
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]]
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]]