Use Cat6 cable connect to gateway router, login webUI navigate to '''System → Maintenance → CLI'''. Open '''CLI''' then login by username root and login password.
+
Connect PC to gateway router via network cable, login webUI navigate to '''System → Maintenance → CLI'''. Open '''CLI''' then login by username root and login password.
Do the following steps to check the result.
Do the following steps to check the result.
<ol>
<ol>
<li>Stand close to '''Router 2''' or '''Router 3'''.</li>
<li>Stand close to '''Router 2''' or '''Router 3'''.</li>
<li>Connect to SSID '''WiFi_Roaming'''</li>
<li>Connect to SSID '''WiFi_Roaming'''</li>
−
<li>Check if the connected devices are showed on wireless clients page. ('''Staus → Wireless → Interfaces''')</li>
+
<li>Check if the connected devices are showed on wireless clients page. ('''Status → Wireless → Interfaces''')</li>
<li>Reboot the router 2 or router 3 (Simulate the devices is offline)</li>
<li>Reboot the router 2 or router 3 (Simulate the devices is offline)</li>
<li>Check the gateway router's CLI, the log will show fast transit completed, do not start 4-way handshake.</li>
<li>Check the gateway router's CLI, the log will show fast transit completed, do not start 4-way handshake.</li>