505
edits
Changes
→Configuration on RUT1 device
Navigate to the '''Network > Devices'''
Navigate to the '''Network > Devices'''
#In '''Remote address''' section, instead of wired WAN IP, '''RUT2 Public IP''' address will be used
#In '''Remote address''' section, instead of wired WAN IP, '''RUT2 Public IP''' address will be used
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan over mobile vxlan settings.png|border|class=tlt-border]]
===Configuration on RUT2 device===
----
Navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the mobile WAN interface.
[[File:Vxlan over mobile wan config rut1 rev2.png|border|class=tlt-border]]
:Configuration window will open. Adjust following:
#Disable '''Auto APN'''
#Select an APN that will provide your router with a public IP
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan over mobile wan config rut1 2.png|border|class=tlt-border]]
Navigate to the '''Network > Devices'''
#In '''Remote address''' section, instead of wired WAN IP, '''RUT1 Public IP''' address will be used
# Click [[File:Save & Apply.png|90px]] twice
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan over mobile vxlan settings.png|border|class=tlt-border]]
[[File:Vxlan over mobile vxlan settings.png|border|class=tlt-border]]