505
edits
Changes
→Configuration on RUT1 device
#Click on the [[File:Add Button.png|50px]]
#Click on the [[File:Add Button.png|50px]]
[[File:Vxlan over vpn add server.png|border|class=tlt-border]]
[[File:Vxlan over vpn add server.png|border|class=tlt-border]]
#<li value="3">Enter name of the new VXLAN interface
#<li value="3"> Enable instance
#Since RUT1 will serve as the server device, the Remote endpoint field should be left blank
#Select '''Pre-Shared Key''' as the authentication method
#Enter the key. This key must match the one that will be entered later in the RUT2 IPSec settings
#Enter the RUT1 LAN IP address as the '''Local identifier'''
#Enter the RUT2 LAN IP address as the '''Remote identifier'''
[[File:Vxlan over vpn server settings p1.png|border|class=tlt-border]]
[[File:Vxlan over vpn server settings p1.png|border|class=tlt-border]]
#<li value="9">Enter name of the new VXLAN interface
:Scroll down to '''Connection settings''':
#<li value="9">Select "'''Start'''" in '''Mode''' section
#Select "'''Tunnel'''" as connection type
#Enable "'''Route based IPSec'''"
#Enter lower MTU to reduce packet size (optional)
[[File:Vxlan over vpn server settings p2.png|border|class=tlt-border]]
[[File:Vxlan over vpn server settings p2.png|border|class=tlt-border]]