505
edits
Changes
→Configuration on RUT2 device
#Enter RUT1 Public IP
#Enter RUT1 Public IP
#Select '''Pre-Shared Key''' as the authentication method
#Select '''Pre-Shared Key''' as the authentication method
#Enter the key. This key must match the one that will be entered later in the RUT2 IPSec settings
#Enter the key. This key must match the one that was entered the RUT1 IPSec settings
#Enter the RUT2 LAN IP address as the '''Local identifier'''
#Enter the RUT2 LAN IP address as the '''Local identifier'''
#Enter the RUT1 LAN IP address as the '''Remote identifier'''
#Enter the RUT1 LAN IP address as the '''Remote identifier'''