505
edits
Changes
→VXLAN over Mobile network
In this section, VXLAN will be set up between two Teltonika devices using Mobile WAN, requiring two public IPs—one for each RUT device. The configuration steps will be similar to those described in the [[#VXLAN over Wired WAN|VXLAN over Wired WAN]] section of this page, except for the '''APN''' settings and the '''Network > Devices''' section settings, where the remote address of the created VXLAN interface will be updated to reflect the other router's public IP.
In this section, VXLAN will be set up between two Teltonika devices using Mobile WAN, requiring two public IPs—one for each RUT device. The configuration steps will be similar to those described in the [[#VXLAN over Wired WAN|VXLAN over Wired WAN]] section of this page, except for the '''APN''' settings and the '''Network > Devices''' section settings, where the remote address of the created VXLAN interface will be updated to reflect the other router's public IP.
===Configuration on RUT1 device===
===Configuring APN settings===
----
----
First, both RUT1 and RUT2 devices must have Public IP addresses. To achieve this, manually assign the relevant APN settings to their mobile interfaces to obtain Public IPs:
Navigate to the '''Network > WAN''' section in the WebUI, then click the [[File:Edit button.png]] button for the mobile WAN interface.
Navigate to the '''Network > WAN''' section in the WebUI, then click the [[File:Edit button.png]] button for the mobile WAN interface.
[[File:Vxlan over mobile wan config rut1 rev2.png|border|class=tlt-border]]
[[File:Vxlan over mobile wan config rut1 rev2.png|border|class=tlt-border]]
# Click [[File:Save & Apply.png|90px]] twice
# Click [[File:Save & Apply.png|90px]] twice
[[File:Vxlan over mobile wan config rut1 2.png|border|class=tlt-border]]
[[File:Vxlan over mobile wan config rut1 2.png|border|class=tlt-border]]
===Configuration on RUT1 device===
----
Navigate to '''Network > Devices'''. To create a new instance, click the [[File:Add Button.png|50px]] button. If editing an existing interface from the [[#VXLAN over Wired WAN|'''previous configuration''']], click [[File:Edit button.png]]
Navigate to '''Network > Devices'''. To create a new instance, click the [[File:Add Button.png|50px]] button. If editing an existing interface from the [[#VXLAN over Wired WAN|'''previous configuration''']], click [[File:Edit button.png]]