Changes

If the commands found in the guide above did not suffice your needs, this section provides a list of additional ones. The commands presented in this section will be for both Linux and Windows operating systems. They should be used as syntax examples for your own purposes.

If the commands found in the guide above did not suffice your needs, this section provides a list of additional ones. The commands presented in this section will be for both Linux and Windows operating systems. They should be used as syntax examples for your own purposes.

===Wi-Fi clients list===

===WiFi clients list===

----

----

This command returns a list of devices connected to your WLAN and some additional information about the connection.

This command returns a list of devices connected to your WLAN and some additional information about the connection.

  {"rate":<span style=color:blue>72200</span>,"mcs":<span style=color:blue>7</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>true</span>}}]}]}

  {"rate":<span style=color:blue>72200</span>,"mcs":<span style=color:blue>7</span>,"40mhz":<span style=color:blue>false</span>,"short_gi":<span style=color:blue>true</span>}}]}]}

To obtain these values, the Linux '''iwinfo''' command and '''assoclist''' parameter (red) are used. Highlighted in green are the devices connected to the router via Wi-Fi as identified by their MAC addresses. The response information about the connection with the device, such as signal strength, noise, time of inactivity (idle time), rx, tx rate, etc., is highlighted in blue.  

To obtain these values, the Linux '''iwinfo''' command and '''assoclist''' parameter (red) are used. Highlighted in green are the devices connected to the router via WiFi as identified by their MAC addresses. The response information about the connection with the device, such as signal strength, noise, time of inactivity (idle time), rx, tx rate, etc., is highlighted in blue.  

===Wi-Fi information===

===WiFi information===

----

----

This command returns information on your Wi-Fi Access Point.

This command returns information on your WiFi Access Point.

'''Windows:'''

'''Windows:'''

  {"enabled":<span style=color:blue>false</span>},"hwmodes":["<span style=color:blue>b</span>","<span style=color:blue>g</span>","<span style=color:blue>n</span>"],"hardware":{"name":"<span style=color:blue>Generic MAC80211</span>"}}]}

  {"enabled":<span style=color:blue>false</span>},"hwmodes":["<span style=color:blue>b</span>","<span style=color:blue>g</span>","<span style=color:blue>n</span>"],"hardware":{"name":"<span style=color:blue>Generic MAC80211</span>"}}]}

As with the clients list command described above, to obtain this information the Linux '''iwinfo''' command is used, but this time with the '''info''' parameter (red). The relevant information, such as Wi-Fi SSID, Wi-Fi MAC address, Wi-Fi channel, Encryption type, etc., is highlighted in blue

As with the clients list command described above, to obtain this information the Linux '''iwinfo''' command is used, but this time with the '''info''' parameter (red). The relevant information, such as WiFi SSID, WiFi MAC address, WiFi channel, Encryption type, etc., is highlighted in blue

===Manufacturing information===

===Manufacturing information===