949 bytes added
, 10:30, 11 September 2019
=Summary=
Modbus TCP Master section is used for configuring your router as a master device and other routers configured in this section as slave devices. A Modbus TCP master device can then request data from these Modbus TCP slaves. Firstly, let's configure our second router which will be acting as a slave device.
==Configuring Modbus TCP slave device==
In this example we would be configuring our slave device to have '''192.168.1.2''' internal IP address. This can be done by changing the IP address parameter in '''Network->LAN''' page:
[[File:ModbusTCPMasterSlaveLanIP.png]]
Now we need to enable Modbus service for this slave device as we will open specific port for letting through TCP communications. This is done in '''Services->Modbus''' page:
[[File:ModbusTCPMasterSlaveEnableTCP.png]]
==Adding new slave device==
To add a new slave, enter a custom name, slave's ID, IP address and port and click the "Add" button:
==Testing ==