Line 1: |
Line 1: |
− | ===='''[[Media:RUT2XX R 00.01.14.1 WEBUI.bin|RUT2XX_R_00.01.14.1]]''' | 2021.07.02 | + | ===<b>[[Media:RUT2_R_00.07.04.2_WEBUI.bin|RUT2_R_00.07.04.2]]</b> | 2023.04.18=== |
| | | |
− | * New features | + | * <b>New</b> |
− | ** MeigLink SLM750 Australian module support | + | ** nftables support |
| | | |
| + | * <b>Improvement</b> |
| + | ** <b>Network</b> |
| + | *** Added PDP profile registry and LTE SMS format functions & management for the Verizon network |
| + | *** Improved SIM detection algorithm |
| + | *** Improved Multi-APN connection establishment time |
| + | ** <b>WebUI</b> |
| + | *** Improved Overview page performance |
| + | ** <b>System</b> |
| + | *** Changed hostname to router name |
| + | *** Updated OpenSSL to version 1.1.1t |
| + | *** Updated CA certificates to version 20211016 |
| + | *** Updated libiwinfo to version 2022-08-19 |
| | | |
− | * Improvements: | + | * <b>Fix</b> |
− | ** Added CallFailed error handling | + | ** <b>Network</b> |
− | ** Updated APN database with OTA BELL ME operator APN | + | *** Fixed IPv4, IPv6 mobile connection restarts |
− | ** Added Client ID option to Data to Server | + | *** Fixed operator scanning when mobile interface is disabled |
− | ** Added band selection support for Meiglink SLM750 | + | *** Fixed data limit and tracking when software flow offloading is enabled |
− | ** Added band parsing to mobile library | + | *** Added network reload call before bringing the mobile interface up |
− | ** OpenSSL updated to version 1.1.1k | + | *** Fixed Port-based VLAN ID calculation issue |
| + | *** Fixed PDP context authentication when using special characters |
| + | ** <b>Services</b> |
| + | *** Fixed event text for configurable inputs/outputs on I/O Juggler |
| + | *** Fixed I/O PIN3 value not changing via MODBUS TCP |
| + | *** Added I/O status request error handling in various WebUI pages when the I/O service is booting up |
| + | *** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization |
| + | *** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters |
| + | *** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes |
| + | *** Fixed OpenVPN keep alive setting migration issue |
| + | *** Fixed PPTP server name setting migration issue |
| + | *** Fixed missing WebUI issue caused by Email Relay installation |
| + | *** Fixed NTP's Operator Station Synchronization memory leak issue |
| + | *** Fixed test email validation |
| + | ** <b>System</b> |
| + | *** Fixed libcares vulnerability CVE-2022-4904 |
| + | *** Fixed frr vulnerability CVE-2022-37035 |
| + | *** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS |
| + | *** Removed ability for non root users to edit scripts that get executed as root |
| | | |
− | * Fixes:
| + | ===<b>[[Media:RUT2_R_00.07.04.1_WEBUI.bin|RUT2_R_00.07.04.1]]</b> | 2023.03.24=== |
− | ** Fixed signal strength LED handling for Meiglink modems
| |
− | ** Fixed backup generating without packages
| |
− | ** Fixed service mode handling for Meiglink SLM750 modems
| |
− | ** Fixed band handling when switching service modes
| |
− | ** Fixed SMS storage swap to modem when connection type changed from QMI to PPP
| |
− | ** Fixed IPsec Passthrough function handling
| |
− | ** Fixed Package Manager package install crash on reboot
| |
− | ** Fixed modem FW version show for Meiglink SLM750
| |
− | ** Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
| |
− | ** Fixed DDNS hostname, username and password fields not showing when custom service is chosen
| |
− | ** Fixed IPSec Pre-shared key option validation
| |
− | ** Added security Wireless fixes for the FragAttacks vulnerabilities
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.14 WEBUI.bin|RUT2XX_R_00.01.14]]''' | 2021.03.23====
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed Data Limit issue |
| | | |
− | * New features:
| + | ===<b>[[Media:RUT2_R_00.07.04_WEBUI.bin|RUT2_R_00.07.04]]</b> | 2023.03.07=== |
− | ** PPPoE wired WAN
| |
− | ** WiFi Multiple AP configuration page
| |
| | | |
− | * Improvements: | + | * <b>Improvements</b> |
− | ** Added SHA1 HMAC hash support to dropbear (SSH server/client) | + | ** <b>WebUI</b> |
− | ** Updated libpcap to version 19.1 | + | *** Improved data persistence between page refreshes |
− | ** Updated sqlite3 to version 3.33 | + | *** Improved page navigation behavior |
− | ** Updated curl to version 7.74 | + | *** Improved redirect logic to open configuration edit modals |
− | ** Updated ncurses to version 6.2 | + | *** Updated the 'Status -> Mobile' page |
− | ** Updated pcre to version 8.44 | + | *** Updated interface card in the Overview page |
− | ** Updated iptables to version 1.6.2 | + | *** Separated Sent and Received data bars on the chart in the Mobile Usage page |
− | ** Added hard request, alarm and slave limits to MODBUS TCP Master | + | ** <b>Network</b> |
− | ** Added USB ZLP flag to avoid mobile network loss | + | *** Added an info message displayed when a faulty SIM card is inserted |
− | ** Added new gsmctl command that returns operator names | + | *** Added ResIOT operator's APNs to the APN database |
− | ** Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically | + | *** Improved mobile connection re-establishment after reboot |
| + | *** Improved mobile connection recovery in cases where it was lost unexpectedly |
| + | *** Improved 'Deny data roaming' operation when switching between operators |
| + | *** Changed default WiFi AP cipher to CCMP (AES) |
| + | *** Added the logging of MAC addresses rejected by a WiFi AP |
| + | ** <b>Services</b> |
| + | *** Added MQTT support to I/O Juggler |
| + | *** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted |
| + | *** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule |
| + | *** Added argument support for the 'Execute custom script' SMS rule |
| + | *** Added a frequency option 'schedule' Modbus Master |
| + | *** Added pagination to Events Reporting overview |
| + | *** Added limit to Events Reporting rule list |
| + | *** Added email logging for Events reporting |
| + | *** 'Sync with browser' button in the NTP page now also synchronizes the time zone |
| + | *** Added a limit of 30 for NTP instances |
| + | *** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically |
| + | *** Added "make before break" option to IPsec configuration |
| + | *** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway |
| + | *** Improved MODBUS Master connection handling to reduce connection count |
| + | *** Updated modbus request error messages |
| + | *** Added OpenVPN server ip block support |
| + | *** Added MQTT support for MODBUS Master alarms |
| + | *** Added the possibility to get the device's Ethernet port data via SNMP |
| + | ** <b>System</b> |
| + | *** Updated bash to version 5.1.16 |
| + | *** Added detailed FW update failure error message to Events Log |
| + | *** Improved firmware upload/validation error messages |
| + | *** Updated Turkish language support |
| + | *** Added protocol column to IP block page |
| + | *** Added "vpns.log" file to the Troubleshoot package |
| + | *** Added Wireguard tunnel information to the Troubleshoot package |
| + | *** Updated default admin group access rights |
| + | *** Updated DFOTA notification to show "More info" only when the update is forced |
| | | |
− | * Fixes: | + | * <b>Fix</b> |
− | ** Fixed CVE-2019-9755 | + | ** <b>WebUI</b> |
− | ** Fixed CVE-2018-16789 | + | *** Fixed MAC address showing on mobile interfaces |
− | ** Fixed CVE-2020-12762 | + | *** Fixed mobile cell ID displaying in hexadecimal |
− | ** Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links) | + | *** Fixed mobile data limit card creation in the Overview page |
− | ** Fixed revision buffer size for Operator Control | + | *** Fixed modem widget disappearing from the Overview page |
− | ** Fixed operator selection logic | + | *** Fixed Services page not displaying data after Thingworx package is installed |
− | ** Fixed default PPTP route option handling | + | ** <b>Network</b> |
− | ** Fixed display of DDNS Hostname, Username and Password options when custom service is selected | + | *** Fixed interface priority change issue |
− | ** Fixed incorrect VLAN ID range | + | *** Fixed a Custom Firewall Rule editing issue |
− | ** Fixed IPsec start after reboot issue | + | *** Fixed DMZ configuration saving while it is disabled |
− | ** Fixed IPsec cache issues | + | *** Fixed Port Scan script execution failure |
− | ** Fixed firewall rule execution when QoS is not enabled | + | *** Fixed Firewall zone duplication issue |
− | ** Fixed ZeroTier crashing issues | + | *** Fixed call function when VoLTE is disabled |
− | ** Fixed Events Log Reporting sending email with attached file | + | *** Fixed VoLTE control when IMS is not enabled |
− | ** Fixed unexpected Package Manager crash while installing unsupported packages | + | *** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address |
− | ** Fixed static mobile routes after modem restart | + | *** Fixed APN authentication when using empty credentials |
− | ** Fixed routing issue with mobile PPP connection type | + | *** Fixed manual APN selection from list |
− | ** Fixed double entries after firmware upgrade with keep settings on Output Scheduler | + | *** Fixed disabled WiFi interface after factory reset |
− | ** Fixed Hotspot freeze on launch with certain config bug | + | *** Fixed WiFi interface creation with SAE mixed encryption |
− | ** Fixed wireless device frequency and channel display in wireless widget | + | ** <b>Services</b> |
− | ** Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration | + | *** Fixed I/O Scheduler overlapping instances issue |
| + | *** Fixed Input/Output image pin colors |
| + | *** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active |
| + | *** Fixed WiFi Hotspot landing page uploaded theme image display |
| + | *** Fixed WiFi Hotspot trial user deletion issue |
| + | *** Fixed WiFi Hotspot service crash when associated WiFi interface is not up |
| + | *** Fixed WiFi Hotspot password request by SMS |
| + | *** Fixed WiFi Scanner starting process when the WiFi interface is disabled |
| + | *** Added limitations on message size and quantity of email messages in Email to SMS |
| + | *** Fixed SMTP HELLO value parsing issue |
| + | *** Fixed SMS message window reset button |
| + | *** Fixed not being able to save empty 'Message text' field in Auto Reply |
| + | *** Fixed multi-part SMS concatenation |
| + | *** Fixed multi-part SMS processing |
| + | *** Fixed SMS error message on 'Mobile Data Reset' action |
| + | *** Fixed Data To Server JSON format %n, %N and %s flag issues |
| + | *** Fixed Events Reporting email data clean |
| + | *** Fixed Events Reporting missing config selections |
| + | *** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom |
| + | *** Fixed IPsec instance deletion after removing DMVPN package |
| + | *** Fixed IPSec migration via Backup file when DMVPN is configured |
| + | *** Fixed IPsec naming issue when the includes an equals sign |
| + | *** Fixed L2TP client to use correct interface on failover events |
| + | *** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client |
| + | *** Fixed MODBUS database size limiting issue |
| + | *** Fixed MODBUS MQTT Gateway client ID input |
| + | *** Fixed MODBUS TCP Slave RSSI value |
| + | *** Fixed MODBUS test button returning errors when several non-connected devices are configured |
| + | *** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones |
| + | *** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected |
| + | *** Fixed OpenVPN Static Key configuration saving by making Static key upload required |
| + | *** Fixed OpenVPN TLS client creation issue while LAN is down |
| + | *** Fixed Package Manager displaying non-existent packages |
| + | *** Fixed Package Manager errors showing up after successful installations |
| + | *** Fixed Periodic Reboot entry duplication after a power cycle |
| + | *** Fixed PPTP 'Client to client' option not being applied after save |
| + | *** Fixed receiving excessive device state emails after a reboot is initialized over RMS |
| + | *** Fixed WebUI unavailability after unsuccessful package install |
| + | ** <b>System</b> |
| + | *** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929 |
| + | *** Fixed bash vulnerability CVE-2022-3715 |
| + | *** Fixed CGI-IO file download vulnerability CVE-2022-38333 |
| + | *** Fixed libxml2 vulnerability CVE-2022-40304 |
| + | *** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552 |
| + | *** Fixed LED animation during firmware upgrade |
| + | *** Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version |
| + | *** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs |
| + | *** Improved file upload logic |
| + | *** Fixed GPL firmware compilation with selected Tinc package |
| + | *** Fixed OpenVPN Static Key migration via keep settings issue |
| + | *** Fixed NTP time zone name setting migration when the name contains whitespaces |
| + | *** Fixed language setting issue |
| + | *** Fixed integer validation on industrial services |
| + | *** Fixed LED indications when PDP type is IPv6 |
| + | *** Fixed issues with PDP type and SMS limit period migration via keep settings |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.13.3 WEBUI.bin|RUT2XX_R_00.01.13.3]]''' | 2021.01.26==== | + | ===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09=== |
| | | |
− | * Fixes: | + | * <b>Fix</b> |
− | ** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687 | + | ** <b>Network</b> |
− | ** Fixed SSH reachable over SIM IP in early boot | + | *** Changed generic modem restart method |
| + | *** Fixed mobile page VoLTE switching issues |
| + | ** <b>Services</b> |
| + | *** Sanitized tcpdump storage location |
| + | ** <b>System</b> |
| + | *** Fixed legacy backup upload |
| + | *** Fixed upgrade from legacy FW issue with keep settings |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12==== | + | ===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25=== |
| | | |
− | * Fixes: | + | * <b>Fix</b> |
− | ** Added openvpn patch to fix CVE-2020-11810 | + | ** <b>Network</b> |
− | ** Updated openssl to version 1.1.1i
| + | *** Fixed disabled WiFi interface after factory reset |
− | ** Added dnsmasq patch for CVE-2019-14834 | |
− | ** Added strongswan patch to fix CVE-2018-10811
| |
− | ** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
| |
− | ** Updated uci to version 2019-09-01
| |
− | ** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
| |
− | ** Fixed factory reset on button that wouldn't perform a complete settings wipe | |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19==== | + | ===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13=== |
| | | |
− | * Fixes: | + | * <b>New</b> |
− | ** Randomized the global rate limiter to mitigate "SAD DNS" attack | + | ** <b>System</b> |
| + | *** Japanese language |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
| + | * <b>Improvements</b> |
| + | ** <b>Network</b> |
| + | *** Optimized mobile netifd script installation |
| | | |
− | * New features: | + | * <b>Fix</b> |
− | ** IPsec Xauth | + | ** <b>Network</b> |
− | ** IPsec Passthrough | + | *** Shortened modem hang monitor timeout |
| + | *** Fixed VLAN option setting when changing VLAN ID |
| | | |
− | * Improvements:
| + | ===<b>[[Media:RUT2_R_00.07.03.1_WEBUI.bin|RUT2_R_00.07.03.1]]</b> | 2023.01.03=== |
− | ** Added Input/Output default chain policy selections for firewall zones
| |
− | ** Removed IPv6 related options from Setup Wizard
| |
− | ** Improved WebUI page loading speed
| |
− | ** Added a possibility to set MQTT credentials for Modbus Data Sender
| |
− | ** Added options to keep connection open for Modbus TCP Slave
| |
− | ** Added TLS certificate options to HTTP(S) data sending for Modbus data
| |
− | ** Added the option to send SMS messages to multiple numbers on Modbus Alarms
| |
− | ** Added IPsec aggressive host enable option
| |
− | ** Expanded IPSec identifier validation
| |
− | ** Added WiFi SSID field validation
| |
− | ** Changed IP leasing sequence in mobile Passthrough mode
| |
− | ** Added SHA512 support
| |
− | ** Added MD5 & SHA256 checksum calculation for Configuration Backup files
| |
− | ** Added uploaded package signature verification to Package Manager
| |
− | ** Added new program that sends and reads GRE Tunnel 'keep alive' packets
| |
− | ** Changed default WAN Failover values
| |
− | ** Simplified key combination for opening a new CLI tab
| |
| | | |
− | * Fixes: | + | * <b>Improvements</b> |
− | ** Fixed Modbus MQTT Gateway not responding when connection with broker restarts | + | ** <b>System</b> |
− | ** Fixed Modbus MQTT Gateway not responding when topics gave special characters
| + | *** Remove front-end certificate validation |
− | ** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
| + | ** <b>Network</b> |
− | ** Fixed configuration field validations in the Modbus MQTT gateway page
| + | *** Optimized mobile netifd script installation |
− | ** Fixed MQTT topic validation in Modbus pages
| |
− | ** Fixed configuration field validations in the ThingWorx page
| |
− | ** Fixed Periodic Output Control table layout
| |
− | ** Fixed security related issues to file uploading and HTTP headers
| |
− | ** Fixed adding new L2TP and PPTP instances on non-English WebUI
| |
− | ** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
| |
− | ** Fixed WiFi SSID string handling in fix_sta_ap.sh
| |
− | ** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
| |
− | ** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
| |
− | ** Fixed table design in the System → Administration → Access Control → Safety page
| |
− | ** Fixed not setting iptables rules for mobile interface | |
− | ** Fixed saving APN after firmware upgrade
| |
− | ** Fixed default mobile MTU setting | |
− | ** Fixed access to LAN page when mobile Bridge mode is enabled
| |
− | ** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
| |
− | ** Removed IPv6 Subprefix Hint field from the Network → LAN page | |
− | ** Fixed DNS push from OpenVPN server
| |
− | ** Fixed L2TP over IPsec with Android 10
| |
− | ** Removed crt_rms deprecated service
| |
− | ** Fixed RMS collecting data usage | |
− | ** Fixed mobile status error for Load Balancing | |
− | ** Fixed WAN MAC address value in SMS Utilities command response
| |
− | ** Fixed answer delay for Call Utilities commands
| |
− | ** Fixed key combination not working
| |
− | ** Removed Wireguard from the Network → Status page when this package is not installed
| |
− | ** Changed SNMP RX, TX object types to uint64
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed modem communication validation |
| + | *** Fixed connection establishment in IPv6 only mode |
| + | ** <b>Services</b> |
| + | *** Fixed libxml2 vulnerability CVE-2022-40303 |
| + | *** Fixed an IPsec Phase one & two setting migration issue |
| + | *** Fixed OpenVPN migration from legacy firmwares |
| + | *** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware |
| + | ** <b>System</b> |
| + | *** Fixed JSON key parsing; keys can now be any printable character sequence |
| + | *** Fixed memory leak in 'session' module |
| + | ** <b>WebUI</b> |
| + | *** Fixed file pretty name parsing |
| | | |
− | * Improvements:
| + | ===<b>[[Media:RUT2_R_00.07.03_WEBUI.bin|RUT2_R_00.07.03]]</b> | 2022.12.16=== |
− | ** Improved RMS connection establishment
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
| + | * <b>New</b> |
| + | ** <b>Network</b> |
| + | *** Firewall DMZ page |
| + | ** <b>Services</b> |
| + | *** Java package |
| + | *** SFTP server support |
| + | *** OPC UA client |
| + | *** Hotspot registered users management page |
| + | ** <b>System</b> |
| + | *** Portuguese language |
| + | *** Spanish language |
| + | *** Turkish language |
| + | *** Email Relay package |
| + | ** <b>WebUI</b> |
| + | *** New Web menu design |
| | | |
− | *Fixes: | + | * <b>Improvements</b> |
− | **Fixed Verizon operator APN configuration | + | ** <b>Network</b> |
| + | *** Updated modem handling, attachment, tracking and connection establishment processes |
| + | *** Added the possibility to select multiple ports in all firewall port fields |
| + | *** Added 'Match' traffic by type option to firewall traffic rules |
| + | *** Added DNS servers and routing table fields to the Wireguard page |
| + | *** Improved generating network topology |
| + | *** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section |
| + | *** Update Firewall Traffic Rules page with DSCP and MARK options |
| + | *** Added keepalive, holdtime and connect timers to BGP configuration |
| + | *** Added 'Use gateway metric' to network protocols web interface |
| + | *** Added more DHCPv6 client events to system log |
| + | *** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page |
| + | *** Added option to select subnet parameters in mobile Passthrough/Bridge modes |
| + | *** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database |
| + | *** Added mobile connection state for IPv6 |
| + | *** Added individual WiFi toggle support |
| + | *** Added error message when DFS channel is selected during scanning |
| + | ** <b>Services</b> |
| + | *** Added CSP headers to Hotspot Landing Page |
| + | *** Added hotspot user script validation |
| + | *** Improved logging of disconnecting client devices |
| + | *** Implemented Hotspot 'forget' method, which removes user from DB by MAC |
| + | *** Added execute custom script SMS Utilities rule |
| + | *** Added receiver and transceiver mode support to SMPP |
| + | *** Added timezone synchronization with GSM operator option to NTP Client |
| + | *** Updated Zerotier web interface |
| + | *** Added IPsec Flush connection option on tunnel initialization |
| + | *** Added MODBUS slave regfile validation |
| + | *** Added delay, number of timeouts, always reconnect options to MODBUS Master service |
| + | *** Added DMVPN Phase 2 and Phase 3 support |
| + | *** Added synchronization counting to NTP client |
| + | *** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data |
| + | *** Added 'Unregister' button to RMS page |
| + | *** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs |
| + | *** Updated Zerotier package to version 1.10.1 |
| + | *** Added automatic package removal upon failed installation in Package Manager |
| + | *** Added option to describe custom routing table and MTU auto counting to Wireguard VPN |
| + | *** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks |
| + | *** Updated sqm-scripts to version 1.5.1 |
| + | *** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms |
| + | *** Added monthly reboot option to periodic reboot function |
| + | *** Added support for multiple custom option selection to SSTP configuration |
| + | *** Added PKCS12 certificate chain support to OpenVPN |
| + | *** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file |
| + | *** Added QoS selection to MQTT Modbus Gateway |
| + | *** Improved RAM usage during upload and installation of packages via Package Manager |
| + | *** Updated curl to version 7.86.0 |
| + | *** Added brute-force prevention measures to Post/Get |
| + | *** Added automatic private and public key generation to Wireguard VPN |
| + | *** Added multiple Remote source IP support to IPsec |
| + | *** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals |
| + | *** Added functionality to rotate log file when log is saved to Flash memory |
| + | *** Improved performance while fetching packages on repeat visits to the Package Manager page |
| + | ** <b>System</b> |
| + | *** Added a 'test mail' button to the Administration -> Recipients page |
| + | *** Added option to clear blocked IPs in the Access Control page after reboot |
| + | *** Updated Web Request-Response core logic |
| + | *** Added certificate validation to all services that support certificate upload |
| + | *** Updated URL protocol validations |
| + | *** Removed profile update requests during Save & apply |
| + | *** Optimized profile switching logic |
| + | ** <b>WebUI</b> |
| + | *** Added an indication to the Interfaces page that displays when data limit is enabled |
| + | *** Added bootloader version to the Device section in the System page |
| + | *** Added configuration page shortcuts to Overview page widgets |
| + | *** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover |
| + | *** Updated network interfaces protocols web interface |
| + | *** Updated 404 page to include navigation menu |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
| + | * <b>Fix</b> |
| + | ** <b>Network</b> |
| + | *** Fixed jumbo frames MTU issue |
| + | *** Added the 'Any' choice to source & destination IP address field in NAT rule edit |
| + | *** Fixed NHRP web interface issues |
| + | *** Fixed WAN interface configuration interfering with LAN |
| + | *** Fixed mdcollect memory leak issue |
| + | *** Fixed data limit not resetting properly |
| + | *** Fixed incorrect mobile data usage calculations for multiple day periods |
| + | *** Fixed an Auto APN 'Keep settings' issue |
| + | *** Fixed data counting after mobile data limit has been reached |
| + | *** Fixed mobile band not setting correctly on first try |
| + | *** Fixed incorrect data limit conditions causing unwanted SIM switches |
| + | *** Fixed Passthrough DHCP lease time setting |
| + | *** Fixed mobile bridge mode issue when no DNS servers are supplied |
| + | *** Added new Operator Lists instance name validations |
| + | *** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722 |
| + | *** Fixed wireless interfaces connections not reestablishing after disabling & enabling again |
| + | *** Added wget tracking method to WAN Failover |
| + | *** Added interface checks to remove inaccurate Failover events from the Event Log |
| + | *** Fixed Wired WAN connectivity issue when Failover interfaces are disabled |
| + | *** Fixed Failover fallback issue |
| + | ** <b>Services</b> |
| + | *** Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares |
| + | *** Fixed relay state switching |
| + | *** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler |
| + | *** Added I/O restart on configuration profile change |
| + | *** Fixed I/O voltage range display for power socket pins |
| + | *** Fixed SMNP OID for I/O state |
| + | *** Fixed I/O Juggler SMS text message Save & Apply issue |
| + | *** Fixed Hotspot connected user list maximum upload/download value limits |
| + | *** Fixed incorrect connected Hotspot user information in RMS JSON |
| + | *** Removed unnecessary field from the Port Mirroring page |
| + | *** Fixed Hotspot issues related to specific connected phones |
| + | *** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients |
| + | *** Fixed WiFi Scanner hostname validation issues |
| + | *** Fixed UCI SMS Rule return message to display new changes |
| + | *** Fixed DNP3 issues when asking for modem temperature |
| + | *** Fixed base64 encoding of SMS messages when forwarding to HTTP |
| + | *** Fixed SMS sending issues when using multiple APN |
| + | *** Added Gateway modem option to IP Block and WoL in SMS Rule edit |
| + | *** Fixed unblocking IP addresses with an SMS message |
| + | *** Fixed Mobile Utilities page not load properly on some occasions |
| + | *** Fixed dbus vulnerability CVE-2020-35512 |
| + | *** Fixed dnsmasq vulnerability CVE-2022-0934 |
| + | *** Fixed ext4 vulnerability CVE-2021-3428 |
| + | *** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594 |
| + | *** Fixed libxm12 vulnerability CVE-2022-29824 |
| + | *** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4 |
| + | *** Fixed MQTT DoS vulnerability CVE-2021-41039 |
| + | *** Fixed privoxy vulnerability CVE-2021-44542 |
| + | *** Fixed python3 vulnerability CVE-2022-42919 |
| + | *** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079 |
| + | *** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790 |
| + | *** Fixed switching between RMS connection types while the device is unregistered |
| + | *** Fixed reload issues in website blocking feature |
| + | *** Fixed IPsec PSK secret required field validation |
| + | *** Fixed bandwidth limiting after QoS is enabled for the first time |
| + | *** Fixed Dropbear issues when logging in over IPv6 |
| + | *** Fixed Modbus status in Status -> Services page |
| + | *** Fixed Azure IoT Hub application issues when sending large volumes of data |
| + | *** Fixed Azure IoT Hub MQTT password validation |
| + | *** Fixed DMVPN configuration migration issue |
| + | *** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4 |
| + | *** Fixed DMVPN IPsec connection issue |
| + | *** Fixed DMVPN mobile interface 'Keep settings' migration issue |
| + | *** Fixed Dynamic DNS long hostname text display issue |
| + | *** Fixed Events Reporting memory leak issue |
| + | *** Fixed Events Reporting not triggering after flipping an I/O slider |
| + | *** Fixed FOTA cron job not starting after factory reset |
| + | *** Fixed IPsec local firewall option parsing |
| + | *** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore |
| + | *** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page |
| + | *** Fixed NTP pool hostname validation |
| + | *** Fixed OpenVPN certificate remove with Static key and TLS authentication methods |
| + | *** Fixed OpenVPN configuration saving issue when using HMAC key authentication |
| + | *** Fixed OpenVPN custom dev name transformation to correct format |
| + | *** Fixed OpenVPN device name setting logic when uploading config from file |
| + | *** Fixed OpenVPN instance status display |
| + | *** Fixed OpenVPN TAP (bridged) configuration detection |
| + | *** Fixed Qos configuration saving issue occurring after instance deletion |
| + | *** Fixed RMS JSON incorrect WAN state and IP information |
| + | *** Fixed RMS step access issue in the Setup Wizard page |
| + | *** Fixed SNMP issues after reboot while using a Hotspot |
| + | *** Fixed SNMP generating MIB files for devices in accordance with to their hardware |
| + | *** Fixed SNMP traps not working after SNMP is installed from server |
| + | *** Fixed SSTP client route creation issue |
| + | *** Fixed UPNP secure mode not turning off issue |
| + | *** Fixed Wireguard route to endpoint issue |
| + | *** Fixed manual package installation for queued packages |
| + | *** Fixed NAT Rules dependency from IPsec web instance |
| + | *** Returned usleep utility |
| + | *** Updated Australian and South African NordVPN server IP addresses |
| + | ** <b>System</b> |
| + | *** Fixed certificate signing issues |
| + | *** Fixed Telnet, CLI access blocking after max invalid tries |
| + | *** Fixed FW upgrade with 'Keep settings' while low free space is available |
| + | *** Fixed backup file duplication issue |
| + | *** Fixed network device handling in system |
| + | ** <b>WebUI</b> |
| + | *** Fixed Hotspot interface display |
| + | *** Fixed side widget accessibility during first login |
| + | *** Fixed file upload issues |
| + | *** Fixed drag and drop issue in the Traffic Rules page |
| + | *** Fixed protocol display in the overview of the Interfaces page |
| + | *** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings' |
| + | *** Fixed login errors after browser tab restoration |
| + | *** Fixed redirect to newly set IP address after Interface configuration |
| + | *** Fixed firmware upgrade verify spinner not closing |
| + | *** Fixed an issue with file upload via drag and drop |
| | | |
− | *Fixes:
| + | ===<b>[[Media:RUT2_R_00.07.02.7_WEBUI.bin|RUT2_R_00.07.02.7]]</b> | 2022.09.12=== |
− | **Fixed AT&T operator APN
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
| + | * <b>Improvements:</b> |
| + | ** Improved manual-auto connection mode |
| | | |
− | *New features: | + | * <b>Fixes</b> |
− | **Added sms remote configuration option | + | ** Fixed AT command for SMS storage usage |
− | **Added "Enable HTTPS" option in "Access Control" page
| + | ** Fixed CVE-2022-1012 memory leak vulnerability |
− | **Added network frequency band select support for EG25-G modem
| + | ** Fixed CVE-2022-37434 kernel vulnerability |
− | **Added additional service mode options to setup wizard | + | ** Fixed interface option reset after VLAN ID change |
− | **Added Japanese language support
| + | ** Removed memory leak on port events |
− | **Added TLS support to MQTT publisher
| + | ** Fixed WiFi Scanner out of range crash when iterating collected data |
− | **Added mqtt subscriber support
| |
− | **MQTT-Modbus gateway: add MQTT-Modbus gateway support
| |
− | **Added ability to install packages stored in backup file
| |
− | **Full Unicode SMS support
| |
− | **Added time sync from operator station
| |
− | **Added ntpclient failover to operator station sync
| |
− | *Improvements:
| |
− | **Removed wep encryption from WiFi settings
| |
− | **Added profile scheduler and default configuration profile
| |
− | *Fixes:
| |
− | **Fixed TR-069 wan type value | |
− | **removed GRE tunnel option in Events reporting | |
− | **Removed config update from server option | |
− | **Fixed to display the same units of download and upload speeds in the Hotspot settings. | |
− | **Fixed not showing Hotspot users upload/download statistics
| |
− | **Added ability to write hyphens to static lease hostname.
| |
− | **Fixed RAM usage display
| |
− | **Fixed password change URL after firstboot
| |
− | **Removed change password error message after firstboot
| |
− | **Fixed Web access Control via SMS Utilities
| |
− | **Fxed signal strength logging and reporting
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04==== | + | ===<b>[[Media:RUT2_R_00.07.02.6_WEBUI.bin|RUT2_R_00.07.02.6]]</b> | 2022.08.24=== |
| | | |
− | *Fixes: | + | * <b>Improvements:</b> |
− | **Fixed RMS not displaying data when using WiFi | + | ** Added 'home.vodafone.de' APN |
− | **Fixed RMS not displaying WAN IP with WAN failover | + | ** Improved stability of device information storage |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.11.2 WEBUI.bin|RUT2XX_R_00.01.11.2]]''' | 2019.11.12====
| + | * <b>Fixes:</b> |
| + | ** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode |
| + | ** Fixed Serial-symlink dmesg messages{{#ifeq:{{{name}}}|RUT240| |
| + | ** Fixed VoLTE management|}} |
| + | ** Fixed OpenVPN tls-auth and tls-crypt option names |
| | | |
− | *Fixes:
| + | ===<b>[[Media:RUT2_R_00.07.02.5_WEBUI.bin|RUT2_R_00.07.02.5]]</b> | 2022.08.12=== |
− | **TR-069 WAN type value fix
| |
− | **RMS batch number instead of product code bug fix
| |
− | **Added missing HMAC options and PKCS12 support to OpenVPN
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.11.1 WEBUI.bin|RUT2XX_R_00.01.11.1]]''' | 2019.10.21====
| + | * Improvements: |
| + | ** Updated curl to version 7.83.1 |
| + | ** Updated firmware validation error messages |
| + | ** Added multiple source IP address support to the Port Forwards page |
| + | ** Increased custom APN Username & Password field maximum length to 64 symbols |
| + | ** Added auto switch to modem's SMS storage when SIM card storage doesn't exist |
| + | ** Improved mobile connection status handling |
| + | ** Added CSP headers Hotspot WebUI landing page |
| | | |
− | *New features: | + | * Fixes: |
− | **Auto APN | + | ** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities |
− | **SMS Utilities Auto APN toggling | + | ** Fixed CVE-2022-30065 busybox vulnerability |
− | **Operators control & support for JioAPN | + | ** Fixed file upload path traversal |
− | **Package Manager | + | ** Removed Data to Server limit to proccess less than 10 instances |
− | **RMS wireless monitoring | + | ** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data |
− | **Port based VLAN configuration | + | ** Fixed OpenVPN dev setting logic |
− | **I/O power socket pinout image | + | ** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work |
− | **VRRP advertisement interval option | + | ** Fixed MAC and leasetime setting for Bridge & Passthrough modes |
| + | ** Fixed modal tabs navigation when editing wireless interface with non-english languages |
| | | |
− | *Improvements:
| + | ===<b>[[Media:RUT2_R_00.07.02.4_WEBUI.bin|RUT2_R_00.07.02.4]]</b> | 2022.07.20=== |
− | **UPnP updated to version 2.1
| |
− | **SIM switching optimizations
| |
− | **Faster SSH private key generation on first boot
| |
− | **Added network, serving and neighbor cell information to Troubleshoot files
| |
| | | |
− | *Fixes: | + | * Improvements: |
− | **Wget Reboot minimal interval for action 'reboot' added | + | ** Added default password change warning message before firmware downgrade |
− | **Ping Reboot packet size 0 fix
| + | ** Extended time period for device to make connection to operator |
− | **Modbus WebUI fixes
| + | ** Reduced the number of modem reboots when changing mobile settings |
− | **Modbus WiFi/Mobile on/off fix
| + | ** Reduced excessive log output when no SIM card is inserted |
− | **SMS Utilities table validation fix
| + | ** Added modem restart prevention on modem init |
− | **SMS Utilities UCI API fixes
| + | ** Added disable RPLMN option in the SIM section of the SIM card config |
− | **SMS Utilities SMS response status fix
| |
− | **SMS-Utilities WiFi/Mobile on/off fix
| |
− | **Clarified WebUI options for SMS Forwarding | |
− | **Hotspot Statistics tab shows incorrect information fix | |
− | **Hotspot session name validation fix | |
− | **Hotspot landing page file upload limits increased | |
− | **Fixed MAC address clone configuration
| |
− | **Fixed sessions table dependency on authentication mode
| |
− | **Events log network type logging on modem service restart fix
| |
− | **Events Reporting typos that prevented rules being matched fixes
| |
− | **WAN Failover option disappearing after language change fix
| |
− | **Removed unnecessary fix_sta_ap.sh from syslog messages
| |
− | **Removed OpenVPN converting names to hex
| |
− | **Added file upload limits
| |
− | **DDNS name validation fix
| |
− | **Hostname and router name after backup upload fix
| |
− | **Mobile Data Limit firewall rule init fix
| |
− | **Added missing password validation | |
− | **Fixed default VRRP config to follow RFC 2338
| |
− | **Changed packages names in Package Manager
| |
− | **Input/Output label & functionality fixes
| |
− | **FOTA memory calculation fix
| |
− | **Removed "Site Survey" page
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
| + | * Fixes: |
| + | ** Fixed CVE-2022-2068 vulnerability |
| + | ** Disabled autoconnect on stop-network call |
| + | ** Fixed Hotspot login via landing page issue |
| | | |
− | *New features:
| + | ===<b>[[Media:RUT2_R_00.07.02.2_WEBUI.bin|RUT2_R_00.07.02.2]]</b> | 2022.06.27=== |
− | **New flash validation added
| |
| | | |
− | *Improvements | + | * Improvements: |
− | **Added reply after mobileon and mobileoff SMS Utilities commands | + | ** Added ping to DNS IPv6 support |
| + | ** Added modem reset to default state after device FW upgrade |
| + | ** Modem init now checks NVRAM sensitive commands before setting |
| + | ** GSM output was made consistent |
| + | ** Updated FSTools package to version 2022-05-03 |
| + | ** Added security headers to web requests |
| | | |
− | *Fixes: | + | * Fixes: |
− | **Firmware upgrade with keep settings fix | + | ** Fixed CVE-2019-12900 libbz2 vulnerability |
− | **PPTP fix when upgrading firmware with keep settings | + | ** Fixed behavior of some gsmctl commands |
− | **Do not autocomplete non-system passwords fix | + | ** Fixed CVE-2022-23303 hostapd vulnerability |
− | **Added validation for 'Service mode' change | + | ** Fixed CVE-2022-29581 Linux kernel vulnerability |
− | **VRRP template fix | + | ** Fixed CVE-2022-29458 ncurses vulnerability |
− | **Added validation for user group number format | + | ** Fixed CVE-2022-1292 c_rehash script command injection vulnerability |
− | **SMS Gateway: removed new line add after configuration save
| + | ** Fixed band locking issue |
− | **Added validation to prevent shell command execution via 'name' field in Wake on LAN
| + | ** Fixed race condition for wireless configuration initialization |
− | **NTP time zone options fix | + | ** Fixed operator control issue |
− | **MQTT bridge with SSL/TLS connection fix | |
− | **'Use DNS servers advertised by peer' does not save fix
| |
− | **'FW update available' fix
| |
− | **WAN state and IP print fixes | |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10==== | + | ===<b>[[Media:RUT2_R_00.07.02.1_WEBUI.bin|RUT2_R_00.07.02.1]]</b> | 2022.06.06=== |
| | | |
− | *Fixes: | + | * Improvements: |
− | **Increased RMS HTTP Proxy resource limit | + | ** Improved GSM related messages in Troubleshoot logs |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.07 WEBUI.bin|RUT2XX_R_00.01.07]]''' | 2019.05.31====
| + | * Fixes: |
− | | + | ** Fixed IGMP Proxy menu item not appearing after package installation |
− | *New features:
| + | ** Fixed default mobile network configuration generation |
− | **SNMP: Individual port status added
| + | ** Fixed MODBUS write requests and Mobile Utils option setting |
− | **openssl: update to version 1.0.2r
| |
− | **dropbear: update to version 2019.78
| |
− | **busybox: update to version 1.30.1
| |
− | **uci: update to version 2018-08-11
| |
− | **ubus: update to version 2018-10-06
| |
− | **ubox: update to version 2019-04-07
| |
− | **libubox: update to version 2019-02-27
| |
− | **MQTT: added MQTT support
| |
− | **WebUI: add additional band support for EC25
| |
− | **UPnP: UPnP added
| |
− | **WebUI: add events reporting and reporting configuration support
| |
− | **Flash: Add XT25F128B flash support
| |
− | **Strongswan: Custom option added
| |
− | **WebUI: upload backup from lower firmware version support
| |
− | | |
− | *Fixes: | |
− | **Wireless: Station availability when two or more Access Points are created fix | |
− | **Mobile Graphs: Color and line adjustments
| |
− | **WebUI: Overview->Network->Topology: WAN Failover redirection fix
| |
− | **Strongswan: Shared-keys fix
| |
− | **WebUI: fix input validation issues
| |
− | **Mobile traffic: graph fixes
| |
− | **WebUI: fix LEDs Indication setting
| |
− | **QMI2: set 1st context to IPv4
| |
− | **Hotspot: Restrict internet access fix
| |
− | **Hotspot: 'Invalid' prompt after deleting session fix
| |
− | **IPSec: No shared key validation added
| |
− | **Email-to-SMS: longer SMS fix
| |
− | **IPSec: Allow WebUI access with HTTPS fix
| |
− | **RMS: fixed disable on sysupgrade with keep settings
| |
− | **WebUI: LEDs Indication hint text fix
| |
− | **IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
| |
− | **SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
| |
− | **Wireless: Regulatory domain and channel change fix
| |
− | **SMS-Management: Error message after successful SMS send fix
| |
− | **Services: SNMP Trap redirection fix | |
− | **Periodic Control: Rule addition in Chromium fix
| |
− | **Setup Wizard: Dialing number disappearing fix
| |
− | **WAN: After interface edit, redirect back to main WAN window fix
| |
− | **SNMP: Teltonika MIB file fix
| |
− | **rms_mqtt: HTTPs proxy fix
| |
− | **rms_json: Fixed WAN State and WAN IP
| |
− | **Wireless: STA connection loss fix
| |
− | **QoS: Speed limitation fix
| |
− | **Stunnel: Removed unnecessay WebUI options, added validation.
| |
− | **Port Scan Prevention: Disable fix
| |
− | **Port Scan Prevention: Warning message for remote access added
| |
− | **ledman: fixed led issue when there is no connection
| |
− | **ledman: fixed led issue when rebooting router with reset button
| |
− | **Wireless: Channel frequency dispaly fix
| |
− | **Administration: RMS 'infobox' fix
| |
− | **Setup Wizard: RMS 'infobox' fix
| |
− | **Setup Wizard: Validation and redirection fixes
| |
− | **VRRP: updated to 1.15 version
| |
− | **LAN: Static leases fix
| |
− | **Backup: Redirection to 127.0.0.1 after backup load fix
| |
− | **Network: 'Use WAN as LAN' availability fix
| |
− | **WebUI: WAN as LAN when using main WAN WIFI fix
| |
− | **Network: Delete static protocol options after change to DHCP fix
| |
− | **L2TP and PPTP: updated services
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.06.1 WEBUI.bin|RUT2XX_R_00.01.06.1]]''' | 2019.03.18====
| |
− | | |
− | *New features:
| |
− | **Added 'More' SMS Utilities rule
| |
− |
| |
− | *Fixes:
| |
− | **RMS reconnect issue fix
| |
− | **Hotspot authentication mode change fix
| |
− | **Overview widget fixes
| |
− | **Connection uptime widget fix
| |
− | **SMS Management inbox read fix
| |
− | **Wireless scan fix
| |
− | **SSTP service update
| |
− | **SMS-Utilities: various functionality fixes
| |
− | **Restore-Point: Removed the ability to load restore points of a different router
| |
− | **VLAN: LAN Network configuration backup fix
| |
− | **Maximum length SMS message send fix | |
− | **Long SMS messages stretch out WebUI fix
| |
− | **Ping Reboot: reboots after service is disabled fix
| |
− | **Removed warning message when scanning for WiFi STA
| |
− | **Setup Wizard WiFi channel select custom option remove fix
| |
− | **Call Utilities: double zero in front of the number fix
| |
− | **Setup Wizard: you cannot procceed with setup if you disable DHCP fix
| |
− | **Restore to default percentage counting fix
| |
− | **WoL: Use WAN as LAN fix
| |
− | **Network Operators: Typo fix
| |
− | **Events log: Typo fixes
| |
− | **Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
| |
− | **Hotspot: configuration saves without advertisement address fix
| |
− | **WiFi channel frequency display fix
| |
− | **Mobile Traffic: daily statistics show wrong time fix
| |
− | **STunnel text display fix
| |
− | **IPSec text display fix
| |
− | **OpenVPN remove TLS clients in TAP mode fix
| |
− | **Hotspot: Tab placement fix
| |
− | **Overview: Text changes
| |
− | **SMS-Utilities: 'uci show' fix
| |
− | **WebUI: added connection band info to mobile status page
| |
− | **Mobile: fix for LTE band default value for different regions
| |
− | **RMS: fixed logread messages
| |
− | **I/O: fixed output state labels
| |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.05.1 WEBUI.bin|RUT2XX_R_00.01.05.1]]''' | 2019.02.22==== | + | ===<b>[[Media:RUT2_R_00.07.02_WEBUI.bin|RUT2_R_00.07.02]]</b> | 2022.05.23=== |
| | | |
− | *New features: | + | * <b>New features</b> |
− | **Added Wake on LAN functionality | + | ** Overview side widget |
− | **Added Wake on LAN SMS Utilities rule | + | ** IGMP Proxy |
− | **Added STunnel feature to VPN services | + | ** Privileged Access Management (PAM) |
| + | ** AWS Greengrass support |
| + | ** HTTPS certificate and key upload feature |
| + | ** SSH public keys edit box |
| + | ** License page |
| + | ** DNP3 data for Data to Server |
| | | |
− | *Improvements: | + | * <b>Improvements</b> |
− | **Added every WAN interface selection to Qos | + | ** Updated busybox to version: 1.34.1 |
− | **Add modem restart option to Periodic Reboot | + | ** Updated curl to version 7.79.1 |
− | **Updated curl to version 7.64.0 | + | ** Added iptables filter package for string filtering |
− | **Updated OpenSSL to version 1.0.2q | + | ** Added CHAP authentication for L2TP VPN |
| + | ** Added IPv6 support for L2TPv3 VPN |
| + | ** Added EAP-MSCHAPV2 authentication method for IPsec VPN |
| + | ** Added IPv6 support to Auto Reboot |
| + | ** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page |
| + | ** Updated SNMP version 5.9.1 |
| + | ** Added OpenSSL authentication options to SNMPv3 |
| + | ** Added support for OSPF redistribution options and OSPF neighbors |
| + | ** Added password field to BGP Peers page |
| + | ** Extended BGP "AS" field validation to accept integers up to 4294967295 |
| + | ** Added "DHE+RSA" to OpenVPN cipher selections |
| + | ** Increased OpenVPN max password length from 128 bytes to 512 bytes |
| + | ** Made HMAC key direction initial value dependent on the role of the instance (client or server) |
| + | ** Made HMAC key and HMAC authentication key upload fields required |
| + | ** Added DES to IPsec encryption algorithms selections |
| + | ** Added special character support for CHAP secrets |
| + | ** Added validation requirements for PPTP user list username field |
| + | ** Added option to manually enter Public key in Wireguard configuration |
| + | ** Made generating Wireguard keys possible only while in auto mode |
| + | ** Added Events Log database to troubleshoot archive |
| + | ** Added RFC1918 filter field |
| + | ** Added the possibility to unblock multiple blocked devices at once |
| + | ** Added 'Port' column to blocked login attempts table |
| + | ** Added Speedtest server refresh |
| + | ** Updated Speedtest server list |
| + | ** Added asterisk option to Site Blocking |
| + | ** Added MD5 and SHA256 checksums to package validation page |
| + | ** Changed certificate requirements to only require client key file if client certificate is used |
| + | ** Added pagination and data retention between table pages |
| + | ** Added pagination functionality to tables when there are more than 10 records |
| + | ** Improved table sorting by saving user provided sort settings in the browser |
| + | ** Improved drag and drop functionality |
| + | ** Added the possibility to drag and drop files onto upload components |
| + | ** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page |
| + | ** Added 'Strict-Transport-Security' response header for HTTPS |
| + | ** Added 'breadcrumbs' to modal windows |
| + | ** Improved initial WebUI loading after login |
| + | ** Added mobile bytes sent and bytes received SNMP OIDs |
| + | ** Added mobile LED turn off feature ('System -> Administration' page) |
| + | ** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database |
| + | ** Updated mobile usage data point calculation logic |
| + | ** Added the possibility to manually enter operator number |
| + | ** Improved obtain mobile cell ID process |
| + | ** Added modem restart if SIM card is removed during APN database fetching process |
| + | ** Added unauthorized call logging |
| + | ** Added space character support in SMS commands |
| + | ** Disabled SMS modem storage configuration form when SIM is not inserted |
| + | ** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired) |
| + | ** Added external modem SMS limit Overview card and widget |
| + | ** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button) |
| + | ** Added duplicate value check for list configuration options |
| + | ** Changed mobile card instance design |
| + | ** Fixed 'Mobile Data usage reset' SMS rule |
| + | ** Fixed the default state parameter of SMS list POST/GET command |
| + | ** Added Hotspot configuration profiles |
| + | ** Added local Hotspot user password hashing |
| + | ** Added Hotspot password encoding option |
| + | ** Improved Hotspot related firewall rule setting |
| + | ** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately |
| + | ** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords |
| + | ** Added ubus support to Hotspot |
| + | ** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule |
| + | ** Added I/O SNMP trap |
| + | ** Added ISO 8601 time format to I/O Juggler's '%ts' parameter |
| + | ** Added device name parameter '%pc' to I/O Juggler |
| + | ** Added PPPoE VLAN priority support |
| + | ** Made VRRP ping section dependent on main instance |
| + | ** Added 'WAN to LAN' switch |
| | | |
− | *Fixes: | + | * <b>Fixes</b> |
− | **L2TP network restart after connection loss fix | + | ** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities |
− | **OpenVPN service restart when TLS-Password is changed fix | + | ** Fixed CVE-2022-28391 busybox vulnerability |
− | **Mobile IP and gateway fix | + | ** Fixed CVE-2018-16789 shellinabox vulnerability |
− | **Overview OpenVPN widget display fix | + | ** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities |
− | **IPSec psk_key save after older firmware upgrade fix | + | ** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability |
− | **Configuration backup and firmware upgrade stuck on the 'downloading' page fix | + | ** Fixed zlib backport security issue |
− | **SNMP memory leak fix | + | ** Fixed Wireguard firewall zone assignment |
− | **Mobile data limit keep limit after firmware upgrade with keep settings fix | + | ** Fixed queued packages disappearing from list after FW upgrade with keep settings |
− | **Remote access information fix | + | ** Fixed error message display for multiple input validation rules |
− | **L2TP IP range change fix | + | ** Fixed incorrect DHCP validation range for start and limit fields |
− | **Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix | + | ** Removed 'Bring up on boot' option from network interface configuration pages |
− | **Hotspot firewall rules fix | + | ** Fixed coma-separated DHCP options disappearing after save |
− | **Data-only SIM fix | + | ** Fixed exclude and listen interfaces |
− | **Wireless Station and Access Point fixes | + | ** Fixed 'Use broadcast flag' option saving |
− | **Deleted unnecessary IPsec keep alive option | + | ** Fixed firewall zone assignment when creating new interfaces |
− | **Fixed GRE Tunnel connection | + | ** Fixed OpenVPN 'Netmask' and 'IP address' field validations |
− | **Removed NOTRACK target from firewall rules | + | ** Fixed OpenVPN TAP configuration saving issue |
− | **WAN IP not showing on Login page fix | + | ** Fixed OpenVPN switching to TUN mode when uploading a configuration from file |
− | **DDNS process kill fix | + | ** Fixed dynamic BGP route state display |
− | **WAN selected as LAN fix | + | ** Fixed BGP peer enable in edit page |
− | **IPSec restart when backup mobile fails fix | + | ** Fixed issue when no L2TP client instance could be bound to IPsec |
− | **RMS memory usage fix | + | ** Fixed firewall rule and zone behavior related to config section creation |
− | **CLI Connect button fix | + | ** Added default value for L2TPv3 netmask, which is now written to config after save |
− | **Mobile traffic counter resetting fix | + | ** Fixed passthrough option saving to IPsec file |
− | **Multiple OpenVPN related fixes | + | ** Fixed DMVPN issue where instance configuration could not be saved |
− | **Ping Reboot fix | + | ** Fixed Wireguard peer could not be saved issue |
| + | ** Fixed NTP client time synchronization after factory reset |
| + | ** Fixed device time display with selected time zone |
| + | ** Fixed MODBUS TCP indexation missing bracket issue |
| + | ** Fixed initial MODBUS TCP request count validation |
| + | ** Fixed PIN 3/4 direction switching over MODBUS TCP |
| + | ** Fixed MODBUS data to MQTT socket closing issue when connection fails |
| + | ** Fixed MODBUS alarm configuration deletion |
| + | ** Fixed DNP3 master not working after FW upgrade with 'keep settings' |
| + | ** Fixed DNP outstation not returning error messages |
| + | ** Added missing SNMP objects: mobile IP, data sent/received today |
| + | ** Fixed MQTT Publisher 'Remote address' field validation |
| + | ** Fixed long interface name support for Azure IoT Hub |
| + | ** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters |
| + | ** Fixed missing sent/received data issue |
| + | ** Fixed URL input field length validation |
| + | ** Fixed admin login issue after upload of backup from a device with older firmware versions |
| + | ** Fixed MAC address formatting in Events reporting messages |
| + | ** Fixed Events reporting DHCP lease message spam, when no new lease is added |
| + | ** Fixed logging crashing after downloading Troubleshoot file |
| + | ** Made Wake on LAN visible only on devices with Ethernet ports |
| + | ** Fixed Traffic log file transfer to FTP server |
| + | ** Fixed Web Filter service reloading after a host list file is uploaded |
| + | ** Fixed access denied messages when sending JSON-RPC requests from root user |
| + | ** Fixed error message display about duplicated intervals in Profile scheduler |
| + | ** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields |
| + | ** Corrected OSPF Routing card values, value positions and names |
| + | ** Fixed global secret instances not being removed when there are no IPsec instances |
| + | ** Fixed uploaded file remove icon not staying in position on hover |
| + | ** Fixed Overview card collapse issue that made it unresponsive after too many clicks |
| + | ** Removed WAN6 interface from the Overview page |
| + | ** Fixed mobile IPv6 display in Events Reporting status messages |
| + | ** Fixed Bridge mode when DNS2 is not available |
| + | ** Fixed PAP/CHAP username and password fields not saving in interface edit window |
| + | ** Fixed sending email without secure connection for providers that support such an option |
| + | ** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message |
| + | ** Fixed Call Utilities Events Log message for reboot rule |
| + | ** Fixed SMS command validation for no-authorization option |
| + | ** Fixed MODBUS SMS alarms 'Enable' option saving |
| + | ** Fixed running RMS with no SIM card inserted issue |
| + | ** Fixed firmware available on server version checking issue |
| + | ** Fixed CVE-2020-15078 openvpn vulnerability |
| + | ** Fixed storage calculation for packages |
| + | ** SMS Utilities: enhanced service security |
| + | ** Fixed firmware deletion after leaving the page |
| + | ** Fixed setup wizard redirect after LAN IP change |
| + | ** Fixed various validation bugs, typos, option hints & alignments |
| + | ** Fixed multiple IPv6 configuration field validations |
| + | ** Fixed PDP logging for Verizon operator |
| + | ** Added multiwan support for Wireguard default route |
| + | ** Fixed wireless signal strength display when no clients are connected |
| + | ** Fixed loss of connectivity for clients when router is in STA+AP mode |
| + | ** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP |
| + | ** Fixed Wifi Scanner data not being stored in certain scenarios |
| + | ** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings' |
| + | ** Fixed Hotspot user group limit not resetting on specified time |
| + | ** Removed an RMS error message when no Hotspot users were created |
| + | ** Fixed Hotspot landing page image upload issue |
| + | ** Fixed relay output value display in I/O Juggler condition page |
| + | ** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces |
| + | ** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances |
| + | ** Fixed I/O Juggler's incorrect I/O status messages |
| + | ** Fixed APN migration if APN was selected from APN list on legacy firmware |
| + | ** Fixed RIP configuration migration from legacy firmware versions |
| + | ** Fixed Wireguard interface status setting migration from legacy firmware versions |
| + | ** Fixed default config options for SSH and Web access SMS Utilities rules |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.04.2 WEBUI.bin|RUT2XX_R_00.01.04.2]]''' | 2018.12.20==== | + | ===<b>[[Media:RUT2_R_00.07.01.4_WEBUI.bin|RUT2_R_00.07.01.4]]</b> | 2022.02.25=== |
| | | |
− | *Fixes: | + | * <b>Improvements</b> |
− | **SSH security fix | + | ** Increased Port Forwards rule max name length |
− | **Mobile page fix | + | ** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler |
| | | |
− | ===='''[[Media:RUT2XX R 00.01.04.1 WEBUI.bin|RUT2XX_R_00.01.04.1]]''' | 2018.11.15====
| + | * <b>Fixes</b> |
| + | ** Added missing bracket to the end of MODBUS messages |
| + | ** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option |
| + | ** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page |
| + | ** Fixed firewall extra option validation |
| + | ** Fixed Hotspot enable button validation |
| + | ** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page |
| + | ** Changed the logic of uploading files to the modem |
| + | ** Fixed second mobile interface creation issue |
| + | ** Fixed usage of custom headers in I/O Juggler HTTP action |
| + | ** Fixed 'verify' option parsing for I/O Juggler |
| + | ** Fixed OpenVPN server configuration with password authentication |
| + | ** Fixed NTP interval length validation |
| + | ** Fixed network interface enable after Drag & Drop |
| + | ** Updated NTP client interval to 24h |
| + | ** Fixed connection to whitelist carriers |
| + | ** Fixed Passthrough mode when DHCP is disabled |
| + | ** Fixed 'Deny data roaming' feature |
| + | ** Fixed mobile blocking dependency on region |
| + | ** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled |
| | | |
| + | ===<b>[[Media:RUT2_R_00.07.01.2_WEBUI.bin|RUT2_R_00.07.01.2]]</b> | 2022.01.04=== |
| | | |
− | *New features: | + | * <b>New features</b> |
− | **Added NTP server, force servers option for ntpclient | + | ** DFOTA modem upgrade system for Quectel modems |
− | **Added selectable network band support
| |
− | **Added SSTP
| |
− | **Replace bird routing package with quagga package
| |
− | **Added WiFi MAC Filter address range support
| |
− | **Changed RMS communication protocol to use MQTT instead of OpenVPN
| |
− | **Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
| |
| | | |
− | *Improvements | + | * <b>Improvements</b> |
− | **Updated mobile operator database | + | ** Removed L2TP section title prefixes |
− | **Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration | + | {{#ifeq: {{{name}}} | RUT240 | ** Added necessary/forced module firmware updates to handle AT&T network update |}} |
− | **Sensitive information (usernames and passwords) removed from router's Troubleshoot file | + | * <b>Fixes</b> |
− | **Added warnings to Call Utilities when on 4G-only mode | + | ** Fixed IPSec crashing issue using mobile |
| + | ** Fixed FW flashing when chip is in unknown state |
| + | ** Fixed CPU usage percentage display in the Overview page |
| + | ** Fixed FOTA timeout issue when server does not respond |
| + | ** Fixed installation of backup packages |
| + | ** Fixed mobile data limit display after profile change |
| + | ** Fixed Bridge mode without multi-APN |
| + | ** Fixed multi mobile interface checking |
| + | ** Fixed error handling when the modem is not responding |
| + | ** Prolonged autoconnect setting timeout |
| | | |
− | *Fixes:
| + | ==='''RUT2_R_00.07.01''' | 2021.11.18=== |
− | **Fixed multiwan restart sequence issues causing VPN instabilities
| + | <b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection. |
− | **Static Routes fix
| |
− | **WiFi updates and security fixes
| |
− | **Minor improvements and bug fixes for operator selection
| |
− | **SNMP MIB values and file format fix
| |
− | **SNMP Hotspot and serial values fix
| |
− | **Redirect to login page after factory reset fix
| |
− | **IPsec init script fix
| |
− | **Overview WiFi widget fix
| |
− | **Modbus WiFi enable/disable fix
| |
− | **Modbus APN write and memory leak fixes
| |
− | **JavaScript code multiplication fix
| |
− | **DHCP server lease time validation update fix
| |
− | **Hang up on watchdog reset fix
| |
− | **Overview mobile WAN IP display fix
| |
− | **curl: update to 7.62.0
| |
− | **OpenSSL: update to 1.0.2p
| |
− | **cacert: update to 2018-10-17
| |
− | **arptables segmentation fault fix
| |
− | **quectel-CM: updated to latest version
| |
− | **GRE Tunnel delete after button press fix
| |
− | **Update Teltonika contact address in Licenses page
| |
− | **Disabled passthrough and bridge selection when multiwan is enabled
| |
− | **Fixed lua dispatcher error after reboot
| |
− | **Fixed multiwan metrics and priorities
| |
− | **SMS Utilities SMS status WAN IP with multiwan fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.03.5 WEBUI.bin|RUT2XX_R_00.01.03.5]]''' | 2018.10.23====
| |
− | | |
− | *Fixes:
| |
− | **VPN shutdown at delete fix
| |
− | **PPTP default gateway set and delete fix
| |
− | **OpenVPN status fix
| |
− | **OpenVPN configuration section name compatibility fix
| |
− | **IPsec redirect after save fix
| |
− | **Overview VRRP widget status fix
| |
− | **Hotspot start after reboot fix
| |
− | **Added default LAN IPv6 address
| |
− | **Overview WAN wiki link fix
| |
− | **Hotspot overview fix
| |
− | **Mobile data counter reset fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.03.2 WEBUI.bin|RUT2XX_R_00.01.03.2]]''' | 2018.09.05====
| |
− | | |
− | *New features:
| |
− | **Added operators control with white/black list feature
| |
− | **Added Administration -> Root CA page
| |
− | | |
− | *Improvements:
| |
− | **Added many security updates
| |
− | **Added firmware update information
| |
− | **Added CellID information to Troubleshoot file
| |
− | | |
− | *Fixes:
| |
− | **GPL: compilation fixes
| |
− | **Configuration restore fix
| |
− | **Disabled Hotspot users' ability to reach LAN devices and WebUI
| |
− | **Port Forwarding IP validation fix
| |
− | **System -> Administration -> Overview page loading fix when VPN configuration exists
| |
− | **Some minor DHCP display fixes
| |
− | **Call Utilities reboot action partial message fix
| |
− | **DDNS IP source change and added time selection
| |
− | **OpenVPN service fixes
| |
− | **Some minor QoS fixes
| |
− | **Some minor OpenVPN fixes
| |
− | **Configuration Wizard: LAN page redirect fix
| |
− | **Overview WAN IP fix
| |
− | **Added Redirect to HTTPS information
| |
− | **Troubleshoot TCPdump fix
| |
− | **Changed 'Backup WAN' to 'WAN Failover'
| |
− | **WebUI: language translation in some pages fix
| |
− | **Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
| |
− | **Overview VPN widget IP fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.02.6 WEBUI.bin|RUT2XX_R_00.01.02.6]]''' | 2018.08.22====
| |
− | | |
− | *Fixes:
| |
− | **Fixed GPL Readme
| |
− | **Fixed JavaScript password validation
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.02.3 WEBUI.bin|RUT2XX_R_00.01.02.3]]''' | 2018.06.08====
| |
− | | |
− | *Fixes:
| |
− | **Fixed RMS status in overview page
| |
− | **Fixed LTE signal strength graph
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.01.4 WEBUI.bin|RUT2XX_R_00.01.01.4]]''' | 2018.05.16====
| |
− | | |
− | *New features:
| |
− | **Added DHCP Force option
| |
− | **Added RMS connection page to Setup Wizard
| |
− | **Added forced password change
| |
− | | |
− | *Improvements:
| |
− | **Updated Overview widget icons, added Teltonika Wiki links
| |
− | **Added private key decryption function to OpenVPN client configuration
| |
− | **Added additional DPD options
| |
− | | |
− | *Fixes:
| |
− | **Fixed Wget reboot URL datatype
| |
− | **WebUI: SSH access status fix
| |
− | **Added special symbols exception to SMS-Forwarding
| |
− | **Added missing Events Reporting config for SMS-Utilities
| |
− | **PPP enable/disable bug fix
| |
− | **Multiple Call Utilities fixes
| |
− | **SMS event queries fix
| |
− | **Removed unnecessary sim_switch message text
| |
− | **Some SSH security fixes
| |
− | **Updated Modbus sources and coding table
| |
− | **Multiple OpenVPN bug fixes
| |
− | **Graphs/Signal strength fix when using HSDPA+HSUPA network type
| |
− | **Fixed VLAN DHCP leasing
| |
− | **Administration password change fix
| |
− | **STA mode logic changed
| |
− | **Hotspot bandwith limit fix
| |
− | **Moved IP alias gateway to advanced features
| |
− | **Administration -> Overview fix
| |
− | **Factory reset fix due to mobile connection problems
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.01.00 WEBUI.bin|RUT2XX_R_00.01.00]]''' | 2018.03.19====
| |
− | | |
− | *Improvements:
| |
− | **Added hostname validation for Wget Reboot
| |
− | **New versioning logic
| |
− | | |
− | *Fixes:
| |
− | **Output ON/OFF fix
| |
− | **Firmware Upgrade fix
| |
− | **SSH authentication logging fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
| |
− | | |
− | *New features:
| |
− | **Added Redirect LAN to GRE function
| |
− | | |
− | *Fixes:
| |
− | **Mobile Data Limit fixes
| |
− | **User's password removed from users table
| |
− | **Firmware upgrade message fixed
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.539 WEBUI.bin|RUT2XX_R_00.00.539]]''' | 2018.03.01====
| |
− | | |
− | *Fixes:
| |
− | **Minor Openvpn functionality fixes
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.486 WEBUI.bin|RUT2XX_R_00.00.486]]''' | 2018.02.27====
| |
− | | |
− | *New features:
| |
− | **Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
| |
− | | |
− | *Fixes:
| |
− | **Updated SMS send satus
| |
− | **Added Modbus enable check-box
| |
− | **Added firewall rule so the router would be reachable from WAN when access control is enabled
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.474 WEBUI.bin|RUT2XX_R_00.00.474]]''' | 2018.02.20====
| |
− | | |
− | *Improvements:
| |
− | **Added download MIBS button to SNMP page
| |
− | | |
− | *Fixes:
| |
− | **Fixed style for VPN service pages, Modbus page
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.388 WEBUI.bin|RUT2XX_R_00.00.388]]''' | 2018.02.19====
| |
− | | |
− | *New features:
| |
− | **Added Relayd function that can make the router act like a wireless range extender
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.382 WEBUI.bin|RUT2XX_R_00.00.382]]''' | 2018.02.06====
| |
− | | |
− | *Fixes:
| |
− | **Fixed Wi-Fi logging to FTP function
| |
− | **Fixed site blocking file parsing
| |
− | **System Information texts fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.377 WEBUI.bin|RUT2XX_R_00.00.377]]''' | 2018.01.31====
| |
− | | |
− | *New features:
| |
− | **IPsec: added Transport mode, Firewall options, local IP management options
| |
− | | |
− | *Improvements:
| |
− | **Moved Disable NAT flags from VPN to Firewall page
| |
− | | |
− | *Fixes:
| |
− | **Fixed Firewall config for hotspot interface assignment
| |
− | **DMZ rule position fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.372 WEBUI.bin|RUT2XX_R_00.00.372]]''' | 2018.01.16====
| |
− | | |
− | *Improvements:
| |
− | **Added binero.se to DDNS service providers list
| |
− | **Added some additional SMS Utilities hints
| |
− | **Added support for changing Wireless SSID name from branding script
| |
− | **Improved Email to SMS function
| |
− | | |
− | *Fixes:
| |
− | **WAN port status display fix
| |
− | **Fixed SMS Utilities Write to config bug when sending mobileoff message
| |
− | **Whitelist blocking fix in Site Blocking
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.355 WEBUI.bin|RUT2XX_R_00.00.355]]''' | 2018.01.05====
| |
− | | |
− | *New features:
| |
− | **Added WPA-Enterprise encryption type support for Wi-Fi Access Points
| |
− | **Added Email To SMS, SMS Forwarding functions
| |
− | **Added Wget Reboot function
| |
− | | |
− | *Improvements:
| |
− | **Updated fw upgrade validation for future firmwares
| |
− | | |
− | *Fixes:
| |
− | **Fixed bug of not being able to use hostnames as a destination for Ping Reboot
| |
− | **Input/Output Scheduler backup bug fix
| |
− | **System->Administration page style fixes
| |
− | **Removed wifid due to security issues
| |
− | **Configuration Backup bug fixes
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.339 WEBUI.bin|RUT2XX_R_00.00.339]]''' | 2018.01.02====
| |
− | | |
− | *New features:
| |
− | **Added IPsec option for WebUI access through tunnel
| |
− | **Added Reset button custom hold time configuration
| |
− | | |
− | *Fixes:
| |
− | **Minor Mobile Data Limit bug fix
| |
− | **Renamed mibs file to TLT-MIB.txt
| |
− | **Temperature display fix
| |
− | **Added Async Control Character Maps
| |
− | **Fixed minor grammatical errors in the WebUI
| |
− | **OpenVPN hints fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.312 WEBUI.bin|RUT2XX_R_00.00.312]]''' | 2017.12.08====
| |
− | | |
− | *Fixes:
| |
− | **Some minor PPTP Server and Client functionality fixes
| |
− | **Added fix to PPP Connection Type due to disconnecting mobile connection
| |
− | **Real traffic fix
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.307 WEBUI.bin|RUT2XX_R_00.00.307]]''' | 2017.12.05====
| |
− | | |
− | *New features:
| |
− | **Added Hotspot configuration profiles
| |
− | | |
− | *Improvements:
| |
− | **Added custom redirect address
| |
− | **Added troubleshoot file download protection
| |
− | | |
− | *Fixes:
| |
− | **Some minor Hotspot functionality fixes
| |
− | **Mobile data logging fix
| |
− | **Some minor Dynamic DNS functionality fixes
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.296 WEBUI.bin|RUT2XX_R_00.00.296]]''' | 2017.11.23====
| |
− | | |
− | *Improvements:
| |
− | **SMS Utilities fw_upgrade rule now works with Keep Settings
| |
− | | |
− | *Fixes:
| |
− | **Minor Reregister function fix
| |
− | **Use IPv4 only fix
| |
− | **Minor mobile interface fix
| |
− | **Some minor Site Blocking fixes
| |
− | **Connect to hidden WiFi AP fix
| |
− | **Multiwan metric change fix for RUT230
| |
− | | |
− | ===='''[[Media:RUT2XX R 00.00.284 WEBUI.bin|RUT2XX_R_00.00.284]]''' | 2017.11.03====
| |
− | | |
− | *Improvements:
| |
− | **Improved Mobile Data Limit functionality
| |
− | **Improved Load Balancing functionality
| |
− | <!--
| |
− | | |
− | ===Bootloader Change Log===
| |
| ---- | | ---- |
− | '''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
| + | * <b>New features</b> |
− | | + | ** RUTOS WebUI |
− | ===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
| |
− | | |
− | *Improvements:
| |
− | **Updated links to teltonika-networks.com
| |
− | | |
− | ===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
| |
− | | |
− | *New features: | |
− | **Added all LED indication on device power on.
| |
− | | |
− | ===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
| |
− | | |
− | *Improvements:
| |
− | **Improvements made to the boot up process
| |
− | | |
− | ===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.1]]''' | 2017.07.19====
| |
− | | |
− | *New features:
| |
− | **Added GigaDevice flash support
| |
− | | |
− | ===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.0]]''' | 2017.04.26====
| |
− | | |
− | *Improvements:
| |
− | **Increased CPU clock speed to 400MHz | |
− | | |
− | ===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 1.0.0]]''' | 2017.04.14====
| |
− | | |
− | *New features:
| |
− | **Released U-boot
| |
− | -->
| |