Line 9: |
Line 9: |
| [[File:Network_interface_settings.png|200px|border|class=tlt-border]] | | [[File:Network_interface_settings.png|200px|border|class=tlt-border]] |
| | | |
− | * Disable WAN interface | + | * Disable WAN and WAN6 interfaces |
− | [[File:Interfaces disable wan.png|border|class=tlt-border|1100px]] | + | [[File:WAN WAN6.png|left|1151x1151px|WAN and WAN6 interface]] |
| + | |
| + | * Click '''Save & Apply''' |
| + | |
| ---- | | ---- |
| * Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu. | | * Next we will '''edit''' our LAN interface and navigate to '''Physical settings''' where we will add Interface item from the dropdown menu. |
| [[File:Physical settings of interface lan.png|border|1100px|class=tlt-border]] | | [[File:Physical settings of interface lan.png|border|1100px|class=tlt-border]] |
| ---- | | ---- |
− | * Select Ethernet Adapter item, by default it's '''eth1''' | + | * In interface tab, add both "'''eth0'''" and "'''eth1'''" interfaces |
| [[File:Ethernet adapter in lan interface.png|border|class=tlt-border]] | | [[File:Ethernet adapter in lan interface.png|border|class=tlt-border]] |
| ---- | | ---- |
| * It should result in something like this. | | * It should result in something like this. |
− | [[File:Eth1 appears in lan interface.png|border|class=tlt-border|1100px]] | + | [[File:Eth1 Eth0.png|alt=|border|1100x1100px]] |
− | ----
| + | * Once you're done with configurations above just '''save any changes you made'''. |
− | * Once you're done with configurations above just '''save any changes you made'''. Now head to VLAN settings and check if WAN VLAN ID 1 is disabled, and ID 2 is untagged. | + | * Wait a minute or two for the changes to take effect. If there is no effect, reboot the device. |
− | [[File:Vlan settings for wan as lan.png|border|class=tlt-border|1100px]]
| + | |
| ---- | | ---- |
| At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router. | | At this point, WAN port should work as LAN. Go ahead and try to swap from your to current port to WAN, you should be able to ping the router. |