| Line 1: |
Line 1: |
| | ==Summary== | | ==Summary== |
| | | | |
| − | This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices. | + | This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUT routers. |
| − | ==Step 1: cobot.me configuration == | + | |
| − | ===Login=== | + | ==Step 1: ironwifi.com configuration == |
| | + | ===Login screen=== |
| | + | ---- |
| | + | We need to login into '''console.ironwifi.com/login''' system using our credentials. If you don't have a registered account then you need to create one. You can do that by clicking '''Create Account'''. |
| | + | |
| | + | [[File:Login.png | border| class=tlt-border]] |
| | + | |
| | + | ===Create new network=== |
| | ---- | | ---- |
| − | First, go to '''console.ironwifi.com/login''' and log into your account. If you don't have a registered account then you will need to create one - click '''Open Account.'''
| + | In the opened browser window click '''Networks''' |
| − | [[File:Ironwifilogin2.png|border|center]]
| |
| − | ====Sign Up====
| |
| | | | |
| − | After clicking '''Open Account''' you will be redirected to register page. Enter you account information and click '''Submit'''. To complete registration go to your email inbox.
| + | [[File:ClickNetworks.png| border| class=tlt-border]] |
| | | | |
| − | [[File:Ironregister56.png|border|center]]
| + | Click '''New Network''' |
| | | | |
| | + | [[File:ClickNewNetwork.png| border| class=tlt-border]] |
| | | | |
| | + | Type '''name''' of new network and select '''region''' |
| | | | |
| | + | Click '''Create network''' |
| | | | |
| − | ===Set Up new radius server===
| + | [[File:CreateNetwork.png| border| class=tlt-border]] |
| − | ----
| + | |
| − | In the opened window click '''Networks.'''
| + | Click on your '''created network''' |
| − | [[File:Ironuser5.png|border|center|1220x1220px]] | |
| | | | |
| | + | [[File:ClickOnnewnetwork2.png| border| class=tlt-border]] |
| | | | |
| − | Then - '''New Network''' and you will be prompted to create a new network.
| |
| − | [[File:Ironguest6.png|border|center|1306x1306px]]
| |
| − | Enter your desired network name can click '''Create'''.
| |
| − | [[File:Ironradius1.png|border|center]]
| |
| | ===Network details=== | | ===Network details=== |
| | | | |
| − | Click on your '''created network.'''
| + | Here are the data that we will need in the next step: |
| − | [[File:Irondata1.png|border|center|1142x1142px]] | + | |
| − | You will be taken to a window where all detailed Radius server information will be displayed.
| + | '''Radius ip Address''' : 130.211.107.8 |
| − | [[File:Ironnetwork details.png|border|center|1152x1152px]] | + | |
| − | ===Add Wifi Guest Accounts===
| + | '''Authentication Port''' : 6375 |
| | + | |
| | + | '''Accounting Port''' : 6376 |
| | + | |
| | + | '''Shared Secret''' : goDkt2Abuv74PQ0 |
| | + | |
| | + | '''''! Replace all these (4) values from the ones in your IronWifi account. These values are user-specific. !''''' |
| | + | |
| | + | [[File:NetworkDetails.png| border| class=tlt-border]] |
| | + | |
| | + | ===Create new user=== |
| | + | |
| | + | Click '''Users''' |
| | + | |
| | + | [[File:ClickUsers.png| 1150]] |
| | + | |
| | + | Click '''New User''' |
| | + | |
| | + | [[File:ClickUserNewuser.png|1150]] |
| | + | |
| | + | Type '''Username''' and click '''Create User''' |
| | + | |
| | + | [[File:DemoUser.png|1150]] |
| | + | |
| | + | Click on your user |
| | + | |
| | + | [[File:ClickDemoUser.png| 1150]] |
| | | | |
| − | Open '''Users''' tab and create N'''ew User''' for your WiFi.
| + | Set new password and click '''ENTER''' |
| − | [[File:Ironguest.png|border|center|1388x1388px]]
| |
| − | Type '''Username''' and click '''Create User.'''
| |
| − | [[File:Iron guest1.png|border|center]]
| |
| − | Click on your user.
| |
| − | [[File:Irongust6.png|border|center]]
| |
| − | To set a password click on the '''Password.'''
| |
| − | [[File:Ironpassowrd.png|border|center|776x776px]]
| |
| | | | |
| | + | [[File:Changepw.png| border| class=tlt-border]] |
| | | | |
| − | All created users is displayed under '''Users''' tab.
| |
| − | [[File:Ironguestg.png|border|center|1266x1266px]]
| |
| | ==Step 2: Router configuration == | | ==Step 2: Router configuration == |
| | | | |
| − | If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
| + | Now we need to open our RUT homepage. You can access the website by entering 192.168.1.1 in your internet browser's URL bar. |
| − | [[File:Networking rutx manual webui basic advanced mode.gif|border|center]]
| + | |
| − | ===Creating wireless access point===
| + | Open the hotspot configuration panel by clicking '''Services → Hotspot''' |
| | | | |
| − | If you have already set up your wireless access point - skip this step.
| + | [[File:RclickHotspot.png| border| class=tlt-border]] |
| | | | |
| − | * Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
| + | Click '''Edit''' |
| − | * Go to the '''Network → Wireless''' page.
| |
| − | * '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.
| |
| | | | |
| − | [[File:Wifirut.png|border|center]] | + | [[File:RclickEdit.png| border| class=tlt-border]] |
| | | | |
| − | Edit your new Access Point as below:
| + | Use configuration details from '''Step 1'''. |
| | | | |
| − | # Check '''Enable;'''
| + | Check '''enable''' and '''Terms of service''' box |
| − | # Mode - '''Access Point''';
| |
| − | # ESSID - Your desired Extended Service Set Identifier name;
| |
| − | # Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
| |
| − | [[File:APconfig1.png|border|center]]
| |
| | | | |
| − | Navigate to '''Wireless Security''' tab and choose your '''Encryption''' method '''(1)'''. When you are done, click '''Save & Apply (2)'''.
| + | Select '''External radius''' from '''Authentication mode''' dropbox |
| | | | |
| − | [[File:APsecu.png|border|center]]
| + | Type configuration details '''RADIUS Server''', '''Authentication port''', '''Accounting por'''t and '''Radius secret key''' |
| − | ===Set up hotspot===
| |
| | | | |
| − | Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.
| + | [[File:Rsetting.png| border| class=tlt-border]] |
| | | | |
| − | [[File:Hotspota.png|border|center]]
| + | Click '''save''' |
| | | | |
| − | '''Hotspot configuration''' | + | Wait up to '''5''' minutes from the time you saved the changes. |
| | | | |
| − | In the '''General tab''' do the following steps:
| + | ==Test your hotspot== |
| | | | |
| − | # Check '''Enable;'''
| + | Try connecting to your router using computer or mobile phone. |
| − | # Authentication mode - '''Radius'''.
| |
| − | [[File:Hotspotgentab.png|border|center]]
| |
| | | | |
| | + | Select your router. |
| | | | |
| − | Then go to '''Radius''' tab and enter the Radius server configuration details from cobot:
| + | [[File:Find.jpg| border| class=tlt-border]] |
| | | | |
| − | # '''RADIUS Servers''' - 35.189.111.2, 35.189.127.125;
| + | Type your username and password. |
| − | # '''Authentication port''' - 22035;
| |
| − | # '''Accounting port''' - 22036;
| |
| − | # '''NAS Identifie'''r - 22035;
| |
| − | #'''Radius secret key''' - aG7ilh2QgAHR6exu;
| |
| − | # '''Save & Apply'''.
| |
| − | [[File:Irohotspot.png|border|center]]
| |
| | | | |
| − | ==Test your Hotspot==
| + | Click '''Login''' |
| | | | |
| − | Try connecting to your router using computer or mobile phone.
| + | [[File:LoginRouter.jpg| border| class=tlt-border]] |
| | | | |
| − | * Select the newly created hotspot;
| + | You should see a message '''Authorization Successful''' |
| − | * After successful connection visit any website and you will be redirected to hotspot login page. Type your username and password;
| |
| − | * Click '''Login;'''
| |
| − | * You should see a message '''Authorization Successful;'''
| |
| | | | |
| − | [[File:Phonehostpotccobot.png|border|center]] | + | [[File:Successs.jpg| border| class=tlt-border]] |
| | | | |
| | + | ==See also== |
| | + | https://www.ironwifi.com/ |
| | | | |
| − | ==External links==
| + | [[Ironwifi.com Hotspot Configuration on RutOS firmware]] |
| − | http://www.cobot.me
| |
| | | | |
| − | [[Category:IoT]] | + | [[Category:WiFi]] |