Template:Networking rut200 first start configure your computer
Configure your computer (Windows)
- Enable the wireless network connection (go to Start → Control Panel → Network and Internet → Network and Sharing Center. In the left panel click the Change adapter settings link. Right click on Wireless Network Connection and select Enable).
![Qsg rutxxx enable wireless connection v2.png](/images/thumb/6/64/Qsg_rutxxx_enable_wireless_connection_v2.png/350px-Qsg_rutxxx_enable_wireless_connection_v2.png)
- Setup wireless network adapter on your computer (right click on Wireless Network Connection and select Properties. After that select Internet Protocol Version 4 (TCP/IP) and click Properties).
- Select Obtain IP address and Obtain DNS server address automatically if they are not selected. Click OK.
![Qsg rutxxx obtain ip address automatically v2.png](/images/thumb/c/cc/Qsg_rutxxx_obtain_ip_address_automatically_v2.png/350px-Qsg_rutxxx_obtain_ip_address_automatically_v2.png)
- Right click on Wireless Network Connection and select Connect to see available wireless networks.
![Qsg rutxxx connect to wireless network v2.png](/images/thumb/8/88/Qsg_rutxxx_connect_to_wireless_network_v2.png/350px-Qsg_rutxxx_connect_to_wireless_network_v2.png)
- Choose the wireless network {{{name}}}_**** from the list and click Connect. Enter the WiFi password located on the device's label.
![Rut240 connect to wireless network ssid v2.png](/images/thumb/c/c3/Rut240_connect_to_wireless_network_ssid_v2.png/350px-Rut240_connect_to_wireless_network_ssid_v2.png)