VLAN Inter-Zone accessibility control configuration example
Revision as of 11:19, 14 December 2022 by Justas.Cip (talk | contribs) (Created page with "==Introduction== In this example we will show how to manage VLAN to VLAN communication with either '''one''' firewall zone or '''multiple''' firewall zones. ==Setting up VL...")
Main Page > General Information > Configuration Examples > Router control and monitoring > VLAN Inter-Zone accessibility control configuration example
Introduction
In this example we will show how to manage VLAN to VLAN communication with either one firewall zone or multiple firewall zones.
Setting up VLANs
In this example, we are assuming that the VLANs are already set up, we will configure the firewall accordingly. If you need information on how to create VLANs on your device please refer to this artice: VLAN set up. For this article we have 3 separate VLANs created:
- lan | IP 192.168.1.1/24
- lan2 | IP 192.168.2.1/24
- lan3 | IP 192.168.3.1/24
Created VLANs in the WebUI should look similar to this: