Template:Rms manual management monitoring submenu configuration

The Configuration function provides the possibility to configure custom time intervals at which router parameter values are updated in the RMS.

Next, scroll your mouse pointer to the Monitoring submenu (found in Management → Monitoring) and click Configuration:

After this a new pop-up window should appear. Place check marks next to relevant parameters to set up custom monitoring intervals. On the right you can set up the monitoring update frequency; on the left you can set the time units for that frequency. As you change these settings, an estimated monthly data usage value will be calculated below. Once you are done with your configuration, don't forget to click "Save":

Dynamic parameters - every varying router parameter (e.g., uptime, mobile uptime, modem temperature, etc.)
Static parameters - every static router parameter (e.g., product code, batch number, hardware revision, etc.)
Hotspot parameters - Hotspot related parameters (Hotspot SSID, Hotspot IP address, Users online)
GPS parameters - GPS related parameters (e.g., longitude, latitude, altitude, GPS fix status, time, etc.)
Input/Output parameters - Input/Output related parameters (states of inputs and outputs)
Offline device detection timeout - specifies the frequency at which RMS will check if devices are still online. Unlike other parameters, this applies to all devices in profile
Estimated data usage - calculates an estimate of monthly data usage based on the update period values specified above