Serial Interface Control Commands TRM240

From Teltonika Networks Wiki
Revision as of 12:04, 13 March 2023 by Domnev (talk | contribs) (Created page with "== Serial Interface Control Commands == ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,232 AT&C Se...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control Commands TRM240

Serial Interface Control Commands

AT&C Set DCD Function Mode

The command controls the behavior of the UE‟s DCD (data carrier detection) line.

AT&D Set DTR Function Mode

The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.

AT+IFC Set TE-TA Local Data Flow Control

The command determines the flow control behavior of the serial port.

AT+IFC Set TE-TA Local Data Flow Control

The command determines the serial interface character framing format and parity received by TA from TE.

AT+IPR Set TE-TA Fixed Local Rate

The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate> will not be restored with AT&F.

AT+QRIR Restore RI Behaviorto Inactive

If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Serial_Interface_Control_Commands_TRM240&oldid=105107"