Template:Networking tswos manual diagnostics

From Teltonika Networks Wiki
Revision as of 13:48, 12 October 2023 by Vainius.l (talk | contribs) (Created page with "{{Template: Networking_rutos_manual_fw_disclosure | fw_version ={{Template: Networking_rutos_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }} __TOC__ ==...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Template:Networking rutos manual fw disclosure

Network Diagnostics

Diagnostics

This Diagnostcis section is used to execute simple network diagnostic tests, including ping, traceroute and nslookup.

Field Value Description
Method Ping | Traceroute | Nslookup; default: Ping Specifies the diagnostics method.
  • Ping - sends ICMP requests to the specified address.
  • Traceroute - displays the path that packets have to take in order to reach the specified address.
  • Nslookup - obtains domain name address and IP address mapping information.
    		•
    Protocol IPv4 | IPv6; default: IPv4 Selects the IP (Internet Protocol) version.
    Address ip; default: none IP address or hostname to perform the diagnostic test on.
    Perform -(interactive) button Performs the diagnostic test.

    Cable Diagnostics

    This Cable Diagnostcis service is dedicated to provide information about cable status and length. Full cable diagnostic is performed only when the cable is connected to the switch device. When the cable is fully connected only the cable length measurements will be provided. Note: the provided cable information may not be fully accurate and margin of error could be expected.

    To run cable diagnostic, select ports and press 'Run Diagnostic' button:

    [[Category:{{{name}}} Services section]]

    Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_tswos_manual_diagnostics&oldid=113553"